This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
NOx Reduction Using Injection Rate Shaping and Intercooling in Diesel Engines
Annotation ability available
Sector:
Language:
English
Abstract
Reduction in NOx in light and medium duty diesel engines, without the requirement for Catalyst Converter or Exhaust Gas Recirculation (EGR) and meeting the U.S. emission standards is an important challenge. This paper shows how injection rate shaping should be performed to reduce NOx while engine performance and soot formation remain almost constant. Effects of intercooler with and without rate shaping on NOx reduction will be investigated. Results indicated that the rate shaping was an effective technique to reduce NOx at some operating condition. Combined effects of intercooler and rate shaping have shown a reduction of NOx by 50% for some operating conditions. At idle condition a split injection was found to be a good solution for NOx reduction. A combustion-simulation computer program was used in this analysis for six different operating conditions.
Recommended Content
Authors
Topic
Citation
Ghaffarpour, M. and Baranescu, R., "NOx Reduction Using Injection Rate Shaping and Intercooling in Diesel Engines," SAE Technical Paper 960845, 1996, https://doi.org/10.4271/960845.Also In
References
- Uyehara, O. “A Method to Estimate H2 in Engine Exhaust and Factors that Affect NOx and Particulate in Diesel Engiine Exhaust,” SAE Paper 910732 1991
- Ghaffarpour, M. Baranescu, R, A. Doan, T.D. “Combustion Noise and Emissions Reduction at Idle in Diesel Engines Through Numerical AnaIysis” ASME Paper No. 95-ICE-12 1995
- Miyaki, M. Fujisawa, H. Masuda, A. Yamamaoto, Y. “Development of New Electronically Controlled Fuel Injection System ECD-U2 for Diesel Engines” SAE Paper No. 910242 1991
- Racine, R. Miettaux, M. Drutel, Y. Heidt, J. “Application of a Highly Flexible Electronic Injection System to a Heavy Duty Diesel Engine” SAE Paper No. 910184 1991
- Shakal, J. Martin, J.K. “Effects of Auxiliary Injection on Diesel Engine Combustion” SAE Paper No. 900399 1990
- Shundoh, S. Komori, M. Tsujimura, K. “NOx Reduction from Diesel Combustion Using Pilot Injection with High Pressure Fuel Injection” SAE Paper No. 920461 1992
- Kohketsu, K. Mori, K. Kato, T. Sakai, K. “Technology for Low Emission Combustion Noise and Fuel Consumption on Diesel Engine” SAE Paper No. 940672 1994
- Tow, T.C. Perpont, D.A. Reitz, R.D. “Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine” SAE Paper No. 940897 1994
- Patterson, M.A. Kong, S.C. Hampson, G.J. Reitz, R.D. “Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emission” SAE Paper No. 940523 1994
- Minami, T. Takeuchi, K. Shimazaki, N. “Reduction of Diesel Engine Nox Using Pilot Injection” SAE Paper No. 950611 1995
- Pierpont, D.A. Montgomery, D.T. Reitz, R.D. “Reducing Particulate and NOx Using Multiple Injections and EGR in a D.I. Diesel’ SAE Paper No. 950217 1995
- Timoney, D.J. Smith, W.J. “Correlation of Injection Rate Shapes with D.I. Diesel Exhaust Emissions” SAE Paper No. 950214 1995
- Osuka, I. Nishimura, M. Tanaka, Y. Miyaki, M. “Benefits of New Injection System Technology on Cold Startability of Diesel Engine-Improvement of Cold Startability and White Smoke Reduction by Means of Multi injection with Common Rail Fuel Injection (ECD-U2)” SAE Paper No. 940586 1994
- Hiroyasu, H. Kadota, T. Arai, M. “Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions (Part 1 - Combustion Modeling)” Paper No. 214-12, Bulletin of the JSME 26 214 569 575 April 1983
- Hiroyasu, H. Kadota, T. Arai, M. “Development and Use of a spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions (Part 2 - Computational Procedure and Parametric Study)” Paper No. 214-13, Bulletin of the JSME 26 214 576 583 April 1983
- Nishida Keiya Hiroyasu Hiroyuki “Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine” SAE Paper No. 890269 1989
- Yoshizaki, T. Nishida, K. Hiroyasu, H, “Approach to Low NOx and Smoke Emission Engines by Using Phenomenological Simulation” SAE Paper No. 930612 1995
- Doan, T.D. “A New Method of Calculation of Swirl Ratio Using the Impulse Swirl Meter” Navistar International Transportation Corp. Melrose Park, Illinois 1990