This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Torsional Softening and the Forming Limit Diagram
Annotation ability available
Sector:
Language:
English
Abstract
Torsional softening arising from the deformation-induced anisotropy of texture and dislocation substructure formation affects various regions of the forming limit diagram. The third invariant of overstress, is included in the kinematic and isotropic hardening equations to reflect the dislocation substructure and texture effect on the torsional softening for 304L stainless steel. Common J2 type theories that do not model the torsional softening exhibited in effective stress-strain curves of compression and torsion give rise to different responses at localization and failure and in the post-localization regime.
Topic
Citation
Horstemeyer, M., McDowell, D., and Bammann, D., "Torsional Softening and the Forming Limit Diagram," SAE Technical Paper 960599, 1996, https://doi.org/10.4271/960599.Also In
References
- Hill, R. “A Theory of the Yielding and Plastic Flow of Anisotropic Metals,” Proc. Roy. Soc. A193 281 297 1948
- Bammann, D.J. Int. J. Engng. Sci. 22 1041 1984
- Bammann, D. J. “An Internal Variable Model of Elastic-Viscoplasticity,” The Mechanics of Dislocations Aifantis, E. C. Hirth, J. P. American Society of Metals 203 1985
- Bammann, D. J. “An Internal Variable Model of Viscoplasticity,” Aifantis, E. C. Davison, L. Media with Microstructures and Wage Propagation, Int. J. Engineering Science 8-10 Pergamon Press 1041 1987
- Bammann, D.J. “Modeling the Temperature and Strain Rate Dependent Large Deformation of Metals,” Appl. Mech. Rev. 43 5 Krempl, E. McDowell, D.L. S312 S319 1990
- Trinh, K. V. Gruda, J. D. Failure Resistance of Thin Shells Against Projectile Penetration Sandia Report SAND91-8486 Sandia National Laboratories Livermore, Ca 1991
- Horstemeyer, M. F. “Damage of HY100 Steel Plates from Oblique Constrained Blast Waves,” 137 Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems Giovanola J. H. Rosakis A. J. 1992
- Horstemeyer M. F. “Structural Analysis of a Submarine Using Statistical Design of Experiments,” 171 Advances in Numerical Simulation Techniques for Penetration and Perforation of Solids Chen E. P. Luk V. K. 189 200 1993
- Bammann, D. J. Chiesa, M. L. Horstemeyer, M. F. Weingarten, L. I. “Failure in Ductile Materials Using Finite Element Methods,” Jones N. Weirzbicki T. Structural Crashworthiness and Failure Elsevier Applied Science 1993
- Horstemeyer, M. F. Chiesa, M. L. Bammann, D. J. “Predicting Forming Limit Diagrams with Explicit and Implicit Finite Element Codes,” SAE Tech. Ser. 940749 Chen K. Analysis of Autobody Stamping Technology 11 25 1994
- Ludwik, P. Scheu, R. Stahl U. Eisen. 45 373 1925
- Bishop, J. F. W. Hill, R. “A Theoretical Derivation of the Plastic Properties of a Polycrystalline Face-Centered Metal,” Phil. Mat. ser. 7 42 1298 1307 1951
- Shrivistava, S. C. Jonas, J. J. Canova, G. “Equivalent Strain in Large Deformation Torsion Testing: Theoretical and Practical Considerations,” J. Mech. Phys. Sol. 30 75 90 1982
- Miller, M.P. McDowell, D.L. “Stress State Dependence of Finite Strain Inelasticity,” ASME Summer Applied Mechanics Meeting Tucson, AZ 32 Microstructural Characterization in Constitutive Modeling of Metals and Granular Media 27 44 1992
- Prager, W. Applied Physics 15 64 1945
- Drucker, D. C. Proc. Symposia Appl. Math. 1 181 1949
- Horstemeyer, M. F. Physically-Motivated Modeling of Deformation-Induced Anisotropy Georgia Institute of Technology 1995
- Lathrop, J. F. Bammann, D. J. Chiesa, M. L. Sandia Damage Model Implementation in PRONTO3D and JAC3D, Internal Sandia Report 1992
- Cocks, A. C. F. Ashby, M. G. “Intergranular Fracture During Power-Law Creep Under Multiaxial Stresses,” Metal Science Aug-Sept 395 402 1980
- Keeler, S. P. “Plastic Instability and Fracture in Sheets Stretched Over Rigid Punches,” Massachusetts Institute of Technology 1961
- Asaro, R. J. “Geometrical effects in the inhomogeneous deformation of ductile single crystals,” Acta Met. 27 445 1979