This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Diaphragm Injection Carburettor (DIC) for Stratified-Scavenging of Small Two-Stroke Gasoline Engine
Annotation ability available
Sector:
Language:
English
Abstract
A simple diaphragm injection carburettor (DIC) is developed and patented by the author in the paper. The principle is that, as the function of the diaphragm mechanism, the pressure difference between two sides of the metering hole equals the vacuum of the Venturi, so it can realize the pressurized fuel metering, by the fuel metering hole and vacuum from the Venturi, and fuel injection. The fuel is injected into the feed port and mixes with the small fraction of air through the port, the main port of fresh air from the crankcase is injected to the cylinder with the scavenging organized so that a separating layer is created between the exhaust and feed port, it can substantially reduce short-circuit.
According to the characteristics of low short-circuit at low delivery ratio, the low load fuel supply system of conventional carburettor is preserved and combined with DIC which functions at high load operation. It makes the structure of the whole fuel system simple and is of great significance for development and application of small two-stroke spark-ignition engine.
The basic idea and principle of DIC are described in the paper. Test results on a 30cm3 modified engine are presented, including characteristics of fuel supply and engine's performance comparison with carburetor engine.
Recommended Content
Authors
Topic
Citation
Yang, X., Zhao, H., Zeng, K., Li, G. et al., "Diaphragm Injection Carburettor (DIC) for Stratified-Scavenging of Small Two-Stroke Gasoline Engine," SAE Technical Paper 960364, 1996, https://doi.org/10.4271/960364.Also In
References
- Blair G. Hill B. Miller A Nichell S. “Reduction of Fuel Consumption of a Spark “Ignition Two-Stroke Cycle Engine” SAE Paper 830093 1983
- Motorcycles I. C. Engine Res. Inst. “Two-Stroke I.C. Engine” 1993 2 15
- Magee S. Douglas R. Blair G. Cessard J. “Reduction of Fuel Consumption and Emissions for a Small Capacity Two-Stroke Cycle Engine” SAE Paper 932393 1993
- Rochelle P. “Delayed charging: A Means to Improve Two-Stroke Engine Characteristics” SAE Paper 941679 1994
- Duret P. Ecomard A. Audinet M. “A New Two-Stroke Engine with Compressed Air-Assisted Fuel Injection for High Efficiency Low Emissions Applications” SAE Paper 880176 1988
- Xiaofeng Yang “Injection Carburetor for Two-Stroke Engine” 1995
- Xiaofeng Yang “Diaphragm Fuel Injection System” 1995
- Duret P. Moreau J. F. “Reduction of Pollutant Emissions of the IAPAC Two-Stroke Engine with Compressed Air Assisted Fuel Injection” SAE Paper 900801 1990
- Onishi S. Jo S.H. Shod K. Kate Duo. S. PD. “Active Thermos-Atmosphere Combustion (ATAC)-A New Combustion Process for Internal Combustion Engine” SAE Paper 790501 1979
- MIKUNI CO. “Fuel Injection Device of Injection Carburetor” 1989 5 4
- Deming Jiang “Internal Combustion Engine Fundamental” Chinese Agricultural Mech. Press 1981