This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Diesel Particulate Trap Protection Against Uncontrolled Regeneration via Selective Flow Modulation
Annotation ability available
Sector:
Language:
English
Abstract
Possible techniques to protect the filter against a failure scenario, so far reported, include filter by-passing and limiting the engine A/F ratio. Both techniques aim at controlling the oxygen content of the exhaust gas and thus reducing the oxidation rate in the filter. In this paper a new method for the protection of the trap is presented. This method, called Selective Flow Modulation (SFM) aims at controlling the reaction rate via the modulation of the exhaust gas flow through the filter. For the practical application of such a method, it is necessary to split the filter into at least two parts and to use at least one device for the flow modulation. In addition, a number of different possible SFM configurations are presented and their characteristics are analysed together with the experimental results of the technique applied on two engines, one heavy and one light duty.
Citation
Pattas, K., Samaras, Z., Kyriakis, N., Mihailidis, A. et al., "Diesel Particulate Trap Protection Against Uncontrolled Regeneration via Selective Flow Modulation," SAE Technical Paper 960128, 1996, https://doi.org/10.4271/960128.Also In
References
- S Rodt. Friedrich A. Jost D. Kolke R. Rudolf W. Tappe M. “Passenger Cars 2000: Requirements, Technical Feasibility and Costs of Exhaust Emission Standards for the Year 2000 in the European Community” German Federal Environmental Agency Berlin 1995
- Wiedemann B. Neumann K. “Vehicular Experience with Additives for Regeneration of Ceramic Diesel Filters” SAE paper 850017
- Simon G.M. Stark T.L. “Diesel Particulate Trap Regeneration Using Ceramic Wall-Flow Traps, Fuel Additives and Supplemental Electrical Igniters” SAE paper 850016 1985
- Ha K. Carmichael I. Walsh J. Skabowski A. Goldberger L. “Particulate Trap Technology Demonstration at New York City Transit Authority” SAE paper 9103331
- Pattas K. Samaras Z. Sherwood D. Umehara K. Cantiani C. Barthe Auguerre Chariol O. Ph. Lemaire J 1992 “Cordierite Filter Durability with Cerium Fuel Additive: 100,000 kin of Revenue Service in Athens'% SAE paper 920363
- Dursbeck F. Heine P. Voss H,-J. Waldeyer H. Berlin 1994
- Hoj J. Sorenson S. Stobbe P. “Thermal Loading in SiC Filters” SAE paper 950151
- Bloom R. “The Development of Fiber Wound Diesel Particulate Filter” SAE paper 950152
- Shirk R. Bloom R. Kitahara Y. Shinzawa M. “Fiber Wound Electrically Regenerable Diesel Particulate Filter Cartridge for Small Diesel Engines” SAE paper 950153
- Ban S. Ihara T. Okamoto S. Shinozaki O. Shinoyama E. “Development of Porous Metal for Diesel Particulate Filter” SAE paper 950739
- Pattas K. Samaras Z. Patsatzis N. Michalopoulou C. Stamatelos A. Zogou O. Barkis M. “On-Road Experience with Trap Oxidiser Systems Installed on Urban Buses” SAE paper 900109
- Lemaire J. Mustel W. Zelenka P. “Fuel Additive Supported Particulate Trap Regeneration Possibilities by Engine Management System Measures” SAE paper 942069
- Lepperhoff G Luders H. Barthe P. Lemaire J. “Quasi-Continuous Particle Trap Regeneration by Cerium-Additives” SAE paper 950369
- Pattas K. N. Lee S. H. Cho K. R. Papadopoulos S. G. Kyriakis N. A. “Ceramic Trap System for Passenger Cars SAE paper 940454
- Pattas K. Michalopoulou C. “Catalytic Activity in the Regeneration of the Ceramic Diesel Particulate Trap” SAE paper 920362
- Pattas K. N. Stamatelos A. M. Kougianos K. N. Koltsakis G. C. Pistikopoulos P. K. “Trap Protection by Limiting A/F Ratio During Regeneration” SAE paper 950366
- Pattas K. Patsatzis N. Michalopoulou C. Samaras Z. Sowul H. “Ceramic Trap Regeneration Rate Control through By-pass Technique” SAE paper 880004
- Pattas K. Samaras Z. “Computational Simulation of the Ceramic Trap Transient Operation” SAE paper 890403