This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
On-Line Estimation of Indicated Torque in IC Engines Using Nonlinear Observers
Annotation ability available
Sector:
Language:
English
Abstract
An approach to fault diagnosis for internal combustion engines is considered. It is based on the estimation of cylinder indicated torque by means of sliding mode observers. Instead of measuring indicated pressure in cylinders directly, crankshaft speed is measured as the input of observers, which estimate the indicated torque. Several engine models are considered with different levels of complexity. The indicated torque estimation using sliding mode observers is based on the equivalent control method. The estimation technique is validated experimently on a research engine.
Recommended Content
Authors
Topic
Citation
Drakunov, S., Rizzoni, G., and Wang, Y., "On-Line Estimation of Indicated Torque in IC Engines Using Nonlinear Observers," SAE Technical Paper 950840, 1995, https://doi.org/10.4271/950840.Also In
References
- Citron, S. O'Higgins, J. Chen, L. Y. 1989 “ Cylinder by Cylinder Engine Pressure Torque Waveform Determination Utilizing Crankshaft Speed Fluctuation ” SAE paper no. 890486 Sensors and Actuators SAE Int'l Congress and Exposition Detroit, MI
- Ferenbach, H. 1990 “ Model based combustion pressure computation through crankshaft angular acceleration analysis ” paper no. 900021 Proc. XXII Int'l Symposium on Automotive Technology and Automation Florence, Italy May
- Iida, K. Akishino, K. Kido, K. 1990 “ IMEP Estimation from Instantaneous Crankshaft Torque Variation ” SAE paper no. 900617 SAE Int'l Congress and Exposition February
- Shiao Y. Moskwa J. “ Cylinder Pressure and CombustionHeat Release Estimation for SI Engine Diagnostics Using Nonlinear Sliding Observers ” To appear in IEEE Trans. on Control Systems Technology 1995
- Rizzoni, G. 1986 “ A Model for the Dynamics of the Internal Combustion Engine ” Department of Electrical and Computer Engineering University of Michigan Ann Arbor, MI. January
- Rizzoni, G. 1987 “ Estimate of Indicated Torque From Crankshaft Speed Fluctuations: a Model for the Dynamics of the IC Engine ” XXII International Symposium on Automotive Technology and Automation Florence, Italy May
- Rizzoni, G. 1989 “ Estimate of Indicated Torque From Crankshaft Speed Fluctuations : a Model for the Dynamics of the IC Engine” IEEE Trans. Veh Technol. 38 3 August
- Rizzoni, G. Zhang, Y.X. Identification of a nonlinear internal combustion engine model for on-line indicated torque estimation Mechanical Systems and Signal Processing 8 3 275 287 1994
- Ciulli, E. Rizzoni, G. Dawson, J. Numerical and experiment study of friction on a single cylinder CFR engine 1995 SAE International Congress and Exposition Detroit, MI 1995
- Drakunov, S.V. Sliding-Mode Observers Based on Equivalent Control Method Proceedings of the 31st IEEE Conference on Decision and Control (CDC) Tucson, Arizona December 16 18 1992 2368 2370
- Drakunov, S.V. Izosimov D.B. Luk’yanov A.G. Utkin V.A. Utkin V.I. The Block Control Principle, Part II Automation and Remote Control 51 6,1990 737 746
- Drakunov S.V. Adaptive Quasioptimal Filters with Discontinuous Parameters Automation and Remote Control 44 9 1167 1175 1984
- Filippov, A.F. Differential equations with discontinuous right-hand side Moscow, Nauka 1985
- Misawa, E.A. Hedrick, J.K. Nonlinear Observers A State-of-the-art Survey ASME J. Dynamic Syst. Measurement Contr. 111 3,1989
- Utkin V.I. Sliding Modes and Their Application In Variable Structure Systems Moscow 1978
- Miu, D.K. Yang, B. On the transfer function zeros of the general colocated control systems with mechanical flexibility ASME Journal of Dynamic Syst, Measurement and Contr. 116 151 153 1994