This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Model for Flame Initiation and Early Development in SI Engine and its Application to Cycle-to-Cycle Variations
Annotation ability available
Sector:
Language:
English
Abstract
This paper uses a model which calculates the flame kernel formation and its early development in spark ignition engines to examine the causes of cycle-to-cycle combustion variations. The model takes into account the primary physical factors influencing flame development. The spark-generated flame kernel size and temperature required to initialize the computation are completely determined by the breakdown energy and the heat conduction from burned region to unburned region. In order to verify the model, the computation results are compared with high-speed Schlieren photography flame development data from an operating spark-ignition engine; they match remarkably well with each other at all test conditions.
For the application of this model to the study of cycle-to-cycle variation of the early stage of combustion, additional input is required. First, results from an experiment with a fiber optic spark plug are used to estimate the convective motion of the flame kernel in the vicinity of the spark discharge center at the moment of spark discharge. Then, based on each cycle's convective motion, the mean flame kernel radii are calculated for a fixed time after spark for every cycle, and the flame expansion speeds are obtained. It is found that if only the variation in convection motion is taken into account, the standard deviation of the predicted flame expansion speed distribution is much smaller than that determined experimentally. The dispersion in flame kernel development depends on more than the variation in the convection motion. By assuming that the turbulent kinetic energy is a constant fraction of the total charge kinetic energy from cycle to cycle, the calculated results for the cyclic dispersion in the expansion speed are brought into good agreement with experiments. This indicates that turbulence variations play a much larger role in the cycle-to-cycle variations in flame development than do flame kernel convection variations.
Recommended Content
Authors
Citation
Shen, H., Hinze, P., and Heywood, J., "A Model for Flame Initiation and Early Development in SI Engine and its Application to Cycle-to-Cycle Variations," SAE Technical Paper 942049, 1994, https://doi.org/10.4271/942049.Also In
References
- Pischinger, S. Heywood, J.B. “A model for Flame Kernel Development in a Spark-Ignition Engine” Twenty-Third Symposium (International) on Combustion 1990 1033 1040
- Herweg, R. Maly, R.R. “A Fundamental Model for Flame Kernel Formation In S. I. Engines,” SAE, Paper No. 922243 1992
- Sher, E. Ben-Ya'ish, J. Kravchik, T. “On the Birth of Spark Channel” Combustion and Flame 89 186 194 1992
- Refael, S. Sher, E. “A Theoretical Study of the Ignition of a Relative Medium by Means of an Electrical Discharge,” Combustion and Flame 59 17 30 1985
- Maly, R.R. “Spark Ignition: Its Physics and Effect on the Internal Combustion Engine,” Fuel Economy: Road Vehicles Powered by Spark Ignition Engines Hilliard, J.C. Springer, G.S. Plenum Press 1984
- Pischinger, S. “Effects of Spark Plug Design Parameters on Ignition and Flame Development in an SI-Engine,” M.I.T. 1989
- Metghalchi, M. Keck, J.C. “Laminar Burning Velocity of Propane-Air Mixtures at High Temperature and Pressure,” Combustion And Flame 38 143 154 1980
- Reynolds, W.C. “The Element-Potential Method for Chemical Equilibrium Analysis: Implementation in the Interactive Program STANJAN” January 1986
- Kwon, S. Tseng, L.-K. Faeth, G.M. “Laminar Burning Velocities and Transition to Unstable Flames in H2/O2/N2 and C3H8/O2/N2 Mixtures,” Combustion and Flame 90 230 246 1992
- Keck, J.C. Heywood, J.B. Noske, G. “Early Flame Development and Burning Rates in Spark Ignition Engines and Their Cyclic Variability,” SAE, paper No. 870164 1987
- Heywood, J.B. “Internal Combustion Engine Fundamentals,” 0-07-100499-8 McGraw-Hill 1989
- Bianco, Y. Cheng, W.C. Heywood, J.B. “The Effects of Initial Flame Kernel Conditions on Flame Development in SI Engine,” SAE, paper No. 912402 1991
- Hinze, P.C. “A Study Of Fuel Effects on Early Flame Development in a Spark Ignition Engine,” M.I.T. 1993
- Lord, D.L. Anderson, R.W. Brehob, D.D. Kim, Y. “The effects of Charge Motion on Early Flame Kernel Development,” SAE, paper No. 930463 1993