This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Multi-Zone Model for Prediction of DI Diesel Engine Combustion and Soot Emission
Annotation ability available
Sector:
Language:
English
Abstract
A phenomenological multi- zone combustion model for DI Diesel engines is presented. The purpose of the study is to develop the capability of predicting engine combustion characteristics and soot emission with reasonable accuracy and economy. A new approach to zone division pattern and the major factors controlling in- zone combustion process is taken in the model for this purpose. Applications of this model are made to two DI Diesel engines and are validated by comparing the calculated and experimental results. A parametric study is then carried out.
Authors
Topic
Citation
Xiaoping, B., Shu, H., Dai, Z., Yin, S. et al., "A Multi-Zone Model for Prediction of DI Diesel Engine Combustion and Soot Emission," SAE Technical Paper 941900, 1994, https://doi.org/10.4271/941900.Also In
References
- Chiu W. S. Shahed S. M. Lyn W. T. “A Transient Spray Mixing Model for Diesel Combustion” SAE Paper 760128
- Hiroyasu H. Kadota T. Arai M. “Development and Use of a Spray Combustion Modelling to Predict Diesel Engine Efficiency and Pollutant Emission” Bulletin of the JSME 26 214 1983 569 583
- Khan I. M. Greeves G. Wang H. T. “Factors Affecting Smoke and Gaseous Emissions from Direct Injection Engines and a Method of Calculation” SAE Paper 730169
- Meguerdichian M. Watson N. “Prediction of Mixture Formation and Heat Release in Diesel Engines” SAE Paper 780225
- Lipkea W. H. Kejoode A. D. “A Model of a Direct Injection Diesel Combustion System for Use in Cycle Simulation and Optimization Studies” SAE Paper 870573
- Bazari Z. “A DI Diesel Combustion and Emission Predictive Capability for Use in Cycle Simulation” SAE Paper 920462
- Payri F. Benajes J. Tinaut F. V. “A Phenomenological Combustion Model for Direct-Injection, Compression Ignition Engines” Appl. Math. Modelling 1988 12 293 304
- Dent J. C. Mehta P. S. “Phenomenological Combustion Model for a Quiescent Chamber Diesel Engine” SAE Paper 811235
- Jin G. D. “A Simplified Vaporizing and Mixing Model for Diesel Spray Two- Phase Flow” Transactions of Chinese Society for Internal Combustion Engines 4 1986 2 143 149
- Hardenberg H. O. Hase F. W. “An Empirical Formula for Computing the Pressure Rise Delay of a Fuel from its Cetane Number and from the Relevant Parameters of Direct - Injection Diesel Engines SAE Paper 790493
- Faeth G. M. Olson D. R. “The Ignition of Hydrocarbon Fuel Droplets in Air” SAE Paper 680465
- Henein N. A. Boll J. A. “Correlation of Air Charge Temperature and Ignition Delay for Several Fuels in a Diesel Engine” SAE Paper 690252
- Woschni G “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” SAE Paper 670931
- Lin J. L. “Numerical Calculation of working Processes in Internal Combustion Engines” 18 21 Xi'an Jiaotong Uni. Publishing House 1986
- Nishida K. Hiroyasu H. “Simplified Three-Dimensional Modelling of Mixture Formation and Combustion in a DI Diesel Engine” SAE Paper 890269
- Linden L. H. Heywood J. B. “Smoke Emission from Jet Engines” Comb. Sci. Tech. 2 1970 401 411
- Tesner P. A. Tsyankona E. I. Guilazatdinov L. P. Zuyev V. P. Loshakova G. V. “The Formation of Soot from Aromatic Hydrocarbons in Diffusion Flames of Hydrocarbon- Hydrogen Mixitures” Comb.. and Flame 17 1971 279 285
- Khan I. M. Wang C. H. T. Langridge B. E. “Coagulation and Combustion of Soot Particles in Diesel Engines” Comb. and Flame 17 1971 409 419
- Aoyagi Y. Kanimoto T. Matsui Y. Matsuoka S. “A Gas Sampling Study on the Formation Processes of Soot and NO in a DI Diesel Engine” SAE Paper 800254
- Matsui Y. Kanimoto T. Matsuoka S. “Formation and Oxidation Processes of Soot Particles in a DI Diesel Engine- An Experimental Study via the Two- Colour Method” SAE Paper 820464
- Mei N. Zhu Y. X. Song Z. H. Hu G. D. “Soot Formation, Oxidation and its Mechanism in Different Combustion Systems and Smoke Emission Pattern in DI Diesel Engines” SAE Paper 910230
- Arai M. Tabata M. Hiroyasu H. Shimizu M. “Disintegrating Process and spray Characterization of Fuel Jet Injected by a Diesel Nozzle” SAE Paper 840275