This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Estimation of the Cylinder Pressure in a SI Engine Using the Variation of Crankshaft Speed
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes to measure the cylinder pressure in a SI engine using the variation of crankshaft speed. Assuming engine dynamics as a single degree of freedom the energy equation is derived. Through some assumptions each cylinder pressure can be estimated form the pressure torque.
Through this study cylinder pressures by this method show good accord with measured value in low to medium speed ranges. For more accurate analysis the crank angle based modeling of friction and vibration is required.
Recommended Content
Authors
Citation
Lim, B., Lim, I., Park, J., Son, Y. et al., "Estimation of the Cylinder Pressure in a SI Engine Using the Variation of Crankshaft Speed," SAE Technical Paper 940145, 1994, https://doi.org/10.4271/940145.Also In
References
- Lancaster David R. Krieger Roger B. Lienesch John H. “Measurement and analysis of Engine Pressure Data,” SAE Paper 750026 1975
- Randolph A. L. “Method of Processing Cylinder-Pressure Transducer Signals to Maximize Data Accuracy,” SAE Paper No. 900170 1990
- Toshikazu Ina and Hideki Obayash,” Lean Limit A/F control System by Using Engine Speed Variation,” SAE Paper 860413 1986
- Citron Stephan J. O'Higgins John E. Chen Lillian Y. “Cylinder by Cylinder Engine Pressure and Pressure Torque Waveform Determination Utilizing Speed Fluctuation,” SAE Paper 890486 1989
- Iida Kazumasa Akishino Katuo Kido Kazuo “IMEP Estimation from Instantaneous Crank Shaft Torque Variation,” SAE Paper 900617 1990
- Davain Jacques “Measurement and Analysis of Intra-Cycle RPM Changes,” SAE Paper 930397 1993
- Paul Burton Kinematics and dynamics of Planar Machinery Prentice-Hall, Inc. 433 510 1979
- Benson Rowland S. Whitehouse N.D Internal Combustion Engine Pergamon Press 205 29 1979
- Heywood John B. Internal Combustion Engine Fundamentals McGraw-Hill 383 390 1989
- Lim Byeongjin Lim Yinkeon Kim Eungseo “Development and Use of PC Based Combustion Analyzer,” JSAE Spring Convention 1993
- MAxplus2 Programming Reference Manual Altera Corporation 1993