This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Plasma Spray Processing of Titanium Aluminides
Annotation ability available
Sector:
Language:
English
Abstract
Ti3Al (α2) and TiAl (gamma) are of technological importance to aerospace-type applications due to their attractive high temperature properties. Plasma spraying of fine powder and coatings of Titanium aluminides was carried out to examine the effect of spray parameters on the microstructure and properties of these materials. Characterization of the powders and coatings was performed using the scanning electron microscope (SEM) and image analyzer. The results show that while plasma spraying is a viable process for forming coatings and fine powders of Ti-Al, the initial particle size of the powder feedstock and the plasma gas composition play an important role in successful processing of the material.
Authors
Citation
Khor, K., "Plasma Spray Processing of Titanium Aluminides," SAE Technical Paper 940054, 1994, https://doi.org/10.4271/940054.Also In
References
- Moxson V.S. Freidman G.I. MPR February 1988 88
- Lipsitt H.A. et al. Metall. Trans. A,11A 1980 1369
- Kim Y-W. Dimiduk D.M. “Progress in Understanding of Gamma Titanium Aluminides” JOM 43 8 1991 40 47
- Kim Y-W. “Recent Advances in Gamma Titanium Aluminide Alloys” High Temperature Ordered Intermetallic Alloys IV 777 794 Stiegler J.O. Johnson L.A. Pope D.P. 1991
- Kim Y-W. Froes F.H. “Physical Metallurgy of Titanium Aluminides” High Temperature Aluminides & Intermetallics 465 492 Whang S.H. et al. 1990
- Kim Y-W JOM 41 7 1989 24
- Huang S-C. Shih D.S. Microstructure/Property Relationship in Titanium Aluminides Kim Y-W. Boyer R.R. 1990 105
- Moll J.H. Yolton C.F. McTiernan B.J. Int.J.Powder Metallurgy 26 2 1990 149
- Reed T.B. Adv.High.Temp.Chem. 1 1967 259
- Szekely J. Mater.Res.Soc.Symp.Proc. 30 1984 1
- McPherson R. Surf. Coatings Technol. 39 40 1989 173
- Khor, K.A. J.Mat.Proc.Technol. “Production of fine metal and ceramic powders by the plasma melt and rapid solidification (PMRS) process” 29 1 3 267 281 1992
- Khor K.A. Cheang H.N. Liang M.H. Tan MJ. Sano T. Murakoshi Y. “Rapidly solidified AI-alloy powders produced by the PMRS process” J.Mat.Proc.Technol. 37 1993 417
- Nakamura M. Kaieda Y. Powder Metallurgy 31 1988 201
- Khor KA. Murakoshi Y. Horihata M. Takahashi M. Sano T. “Hot isostatic pressing of plasma sprayed TiAl coatings” Proc -1993 Powder Metallurgy World Congress