This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
SiC as a Substrate for Diesel Particulate Filters
Annotation ability available
Sector:
Language:
English
Abstract
Many of the materials which have been developed for use as particle filters in the exhaust of diesel engines have characteristics which give rise to significant problems in practical use. Due to its special characteristics, it is shown that SiC is very well suited for use as the base material for particulate filters. The physical and thermal properties of porous SiC substrate material as applied to diesel particulate filters have been determined and are presented. Experimental results from several types of filter regeneration processes in exhaust gas systems confirm the improvements in the area of thermal load and reduction in temperature level during regeneration. The reduction in temperature during regeneration is shown to be consistent with the high thermal conductivity of SiC.
Recommended Content
Authors
Topic
Citation
Stobbe, P., Petersen, H., Høj, J., and Sorenson, S., "SiC as a Substrate for Diesel Particulate Filters," SAE Technical Paper 932495, 1993, https://doi.org/10.4271/932495.Also In
References
- Howitt, J. S. Montierith, M. R. “Cellular Ceramic Diesel Particulate Filter” SAE paper 810114 1981
- Itoh, A. Shimato, K. Komori, T. Okazoe, H. Yamada, T. Niimura, K. Watanabe, Y. “Study of SiC Application- to Diesel Particulate Filter (Part 1): Material Development” SAE paper 930360
- Itoh, A. Shimato, K. Komori, T. Okazoe, H. Yamada, T. Niimura, K. Watanabe, Y. “Study of SiC Application to Diesel Particulate Filter (Part 2): Engine Test Results” SAE paper 930360
- Engler, B. “Catalytically Activated Diesel Particulate Traps- New Developments and Applications” SAE paper 860007 1987
- Mihara, T. Kuwano, S. Kusuda, T. Yonemura, M. Nakamoto, M. Takigawa, M. “Diesel Particulate Trap of Corrugate Honeycomb Fabricated with Mullite Fiber Ceramics” SAE Paper 860010 1986
- Goto, Y. Abe T. Sabo T. Hayashida M. “Study of Regeneration of Diesel Particle Trapper by Electrical Self-Heating Type Filter” SAE Paper 920140 1992
- Handenberg, H. O. “Urban Bus Application of a Ceramic Fiber Coil Particulate Trap” SAE paper 870011 1987
- Handenberg, H. O. Dandel, H. L. “Particulate Trap Regeneration induced by means of Oxidizing Agents Injected into the Exhaust Gas” SAE paper 870016 1987
- Enger, B. E. “Catalytic Control of Diesel Particulate” SAE Paper 820184 1982
- Eismark, J. “The Volvo City Filter-Tackling the Particulate Problem” Volvo Technology Report 1990
- Waterman, N. A. Ashby, M.S. Elsevier Materials Selector Elsevier London 1991
- Kitagawa, J. Asami, S. Uehara, K. Hijikata, T. “Improvement of Pose Size Distribution of Wall Flow Type Diesel Particulate Filter” SAE paper 920144
- Meyer, B.A. Smith, D.W. “Flow Through Porous Media: Comparison of Consolidated and Unconsolidated Materials” Ind. Eng. Chem. Fundam. 24 360 368 1985
- Lemkow, J. Sørensen, O.T. Materiale Kendskab Knowledge of Materials 28 DanishTechnological Institute Tåstrup, Denmark 1992
- Schwetz, K.A. Lipp, A. “The Effect of Boron and Aluminum Sintering Additives on the Properties of Dense Sintered Alpha Silicon Carbide” Science of Ceramics 10 Hausner, H. Deutsche Keram. Gesellschaft 1987
- Gulati, T. S. Sherwood, D. L. “Dynamic fatigue for Cordierite Ceramic Wall-Flow Diesel Filters” SAE paper 910135
- Kitagawa, J. Hijikata, T. Yamada, S. “Electric Heating Regeneration of Large Wall-Flow Type DPF” SAE paper 910136
- Gibson, L. J. Ashby, M. F. Cellular Solids Pergamon Press London 1988
- Koumoto, K. Shimizu, H. SeO, W. S. Pai, C. H. Yanagida, H. “Thermal Shock Resistance of Porous SiC Ceramics” British Ceramic Transactions and Journal 90 32 33 1991
- Barin, I. Thermochemical Data of Pure Substances VHC Verlag Berlin 1989
- Jorgensen, P. J. Wadsworth, M. E. Culter, I. B. “Oxidation of Silicon Carbide” J. Am. Cer. Soc. 42 12 1959 613 616
- McKee, D. W. Chatterji, D. “Corrosion of Silicon Carbide in Gases and Alkaline Melts” J. Am. Cer. Soc. 59 9-10 1976 441 444
- Barris, M. A. Reinhart, S. B. Wahlquist, F. H. “The Influence of Lubricating Oil and Diesel Fuel on Ash Accumulation in an Exhaust Particulate Trap” SAE paper 910131 1991
- Garner, C. P. Dent, J. C. “A Thermal Regeneration Model for Monolithic and Fibrous Diesel Particulate Traps” SAE Paper 880007 1988
- Holman, J. P. Heat Transfer MC Graw-Hill Book Co. New York 1972