This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of the Detroit Diesel 440 BHP, 8V-71T Low Heat Rejection Engine for the FAASV and M109 Paladin Vehicles
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes design enhancements and experimental tests performed on the Detroit Diesel 8V-71T Low Heat Rejection (LHR) Engine. The program objective was to increase brake power approximately 10% while maintaining or reducing brake specific cooling system burden and heat rejection to the engine compartment. In order to achieve these objectives, it was necessary to reduce average right bank exhaust temperatures approximately 23°C to insure acceptable engine durability at elevated power levels. All modifications simultaneously satisfy the rigorous constraints imposed by the U.S. Army's M109 Self Propelled Howitzer and M992 Field Artillery Ammunition Support Vehicle (FAASV). The M992 FAASV is a derivative of the M109 armored vehicle which utilizes the same chassis.
Engine fuel supply system, exhaust manifold, turbocharger compressor, and fuel injector modifications were made in order to meet these requirements. A grooveless barrel-faced fire ring design and modified oil control ring configuration were included for improved durability. Experimental engine tests quantified the improvements offered by these changes and validated the final design. A 400 hour North Atlantic Treaty Organization (NATO) durability certification test was used to qualify the final engine design for production release. After passing this test the engine was released to production under model number 7083-7391.
Recommended Content
Technical Paper | Performance Development of a New Axially Moveable Vane Turbocharger |
Technical Paper | A New Design of Low Cost V-band Joint |
Technical Paper | The Fiat 124 AC Engine |
Authors
Citation
Charles, E., Freese, V., Hinkle, S., and Avery, T., "Development of the Detroit Diesel 440 BHP, 8V-71T Low Heat Rejection Engine for the FAASV and M109 Paladin Vehicles," SAE Technical Paper 931133, 1993, https://doi.org/10.4271/931133.Also In
References
- Keelan, T.M. , Kuhn, M.S. , Hinkle, S.J. Swigart, J.E. , “DDC's 8V71T, Low Heat Rejection Engine Developed for the U. S. Army Self Propelled Howitzers and Support Vehicles,” SAE Paper No. 901573 , 1990
- Freese, C.E. , “Surface Layer Activation Testing of 8V-71TLHR Fire Rings During NATO Probe Test” , DDC Report#:P1FM-060-01011-00-AF , April 06 , 1990
- Freese, C.E. “Predicted Fire Ring Life for TACOM 8V-71 LHR (Rated for 460 bhp @ 2300 RPM on NATO cycle), Based Upon DDC's SLA Data” , DDC Report No. P1FM-061-01004-AF , November 16 , 1990
- High Tech Insulators Incorporated , Livonia, Michigan
- Dent, J.C. , “A Basis for the Comparison of Various Experimental Methods for Studying Spray Penetration,” SAE Paper No. 710571 , 1971
- Winsor, R.E. “Simple Equation for Calculation of Fuel Spray Penetration” , DDA Internal Report Number CE-C2-75-013, July 3 , 1975
- Turbocharger and Brake Systems Division, Allied-Signal Inc. , Compressor Efficiency Maps
- Gerlach, C.R. , Schroeder, E.C. , Bass, R.L. , Holster, J.L. , “Bellows Flow-Induced Vibrations and Pressure Loss,” Final Report: Contract No. NAS8-21133, Control No. DCN 1-7-52-20017 (IF), SwRI Project No. 02-2119, Prepared for NASA , 1973
- Gerlach, R. , “NASA Tech Brief: Design of fluid-Duct Bends with Low Pressure Loss” , Brief No. 68-10395, 1968
- Henriksen, B.S. , “Series 92 Fuel Economy Improvements” , SA Paper No. 831202 , 1983
- McGeehan, J.A. , and Painter, L.J. , “Field Performance of SAE15W-40 Multigrade Oils in DDA 8V-92 Engines using Current and New Piston Fire Rings” , SAE Paper No. 870402 , 1987
- Garter, R. , “NATO Qualification Test of Detroit Diesel Series 8V-71T LHR Engine Model 7083-7391” DDC Report # E7PC-126-61001-02-AF, April 08 , 1992