This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Frictional Behavior of Electrogalvanized Sheet Steels
Annotation ability available
Sector:
Language:
English
Abstract
The frictional behavior of two nominally 70 g/m2 electrogalvanized sheet steels, mechanically processed with a series of surface roughnesses and coating morphologies, were evaluated with the bending under tension test. The crystallographic textures for the as-received materials were different; one was primarily prismatic with a friction coefficient of 0.14 and the other was primarily low angle pyramidal with a friction coefficient of 0.20. The friction coefficients were changed by surface modifications and values as high as 0.31 were observed. Friction data are discussed in terms of surface roughness, interfacial contact pressure, true contact area, and crystallographic texture. Results are interpreted on the basis of the deformation characteristics of the zinc coatings and with respect to overall sheet formability characteristics.
Recommended Content
Authors
Citation
Hylton, T., Van Tyne, C., and Matlock, D., "Frictional Behavior of Electrogalvanized Sheet Steels," SAE Technical Paper 930809, 1993, https://doi.org/10.4271/930809.Also In
References
- Schey J.A. Tribologv in Metalworking Metals Park, Ohio American Society for Metals 1983 36 40
- Kotchman D.P. Kim I. Lee D. “Determination of Frictional Behavior In Sheet Metals Using Orthogonal Arrays” IDDRG Working Group 3 1 91-23
- Wright R. Schurman T. “Die Friction Variations in Simulated Sheet Metal Forming, Sheet Metals in Forming Processes Proceedings of the 16th Biennial Congress IDDRG 1990 113 119
- Zheng R. Overby D. “Strip Friction Experimental Study on Galvanized Steel Sheet” Controlling Sheet Metal Forming Processes , Proceedings of the 15th Biennial Congress IDDRG 1988 85 90
- Dieter G. Mechanical Metallurgy 3rd McGraw-Hill New York, NY 1986 544 545
- Rangarajan V. “Effects of Coating Properties on the Formability of Coated Sheet Steels” Ph.D. Thesis No. T-3809, Colorado School of Mines Golden, CO 1989
- Wanheim T. Bay N. “A Model for Friction in Metal Forming Processes” Ann. of CIRP, 27 1978 189 194
- Sulonen M. Eskola P. Kumpulainen J. Ranta-Eskola A. “A Reliable Method for Measuring the Friction Coefficient in Sheet Metal Forming” IDDRG Working Group Meetings, Paper WG III/4 Tokyo 1981
- Wilson W.R.D. Malkani H.G. Saha P.K. “Boundary Friction Measurements Using a New Sheet Metal Forming Simulator” Transactions NAMRI/SME 1991 37 42
- Meier B.T. Reissner J. “Effect of Surface Quality of the Workpiece Material on the Frictional Behavior during Sheet Forming” Proc. of 16th Biennial Cong IDDRG 1990 43
- Wilson W.R.D. “Friction and Lubrication in Sheet Metal Forming” Mechanics of Sheet Metal Forming Koistinen D.P. Wang N.M. New York Plenum Press 1978 157 177
- Vallance D. W. “Analysis of Friction Behavior of Coated Sheet Steel using the Bending Under Tension Test” Master of Science Thesis No. T-3796, Colorado School of Mines Golden, CO February 1990
- Hashimoto K. Ohwue T. Takita M. “Effect of Temperature, Die Materials and Lubricant on Sliding Behavior of Various Coated Sheet Steels” Sheet Metals in Forming Processes , Proceedings of the 16th Biennial Congress IDDRG 1990 153 160
- Nakamura S. Yoshida M. “Study on Method of Evaluation for Frictional Characteristics in Coated Sheet Steels” IDDRG Working Group #3 1/90-7
- Shaffer S.J. Morris J.W. Jr. Wenk H.R. “Textural Characterization and its Applications on Zinc Electrogalvanized Steels” Zinc-Based Steel Coating Systems: Metallurgy and Performance Krauss G. Matlock D.K. TMS, Warrendale, PA 1990 129 140
- Rangarajan V. Giallourakis N. Matlock D.K. Krauss G. “The Effect of Texture on Deformation of Zinc Coatings” Journal of Materials Shaping Technology 6 1989 217 227
- Shaffer S.J. Nojima W.E. Skarpelos P.N. Morris J.W. Jr “Research on the Metallurgical Determinants of Formability in Electrogalvanized Sheet” Zinc-Based Steel Coating Systems: Metallurgy and Performance Krauss G. Matlock D.K. TMS, Warrendale, PA 1990 251 261
- Hylton T.A. Wenzloff G.J. Van Tyne C.J. Matlock D.K. “The Importance of Microstructure, Surface Roughness, and Properties on the Frictional Behavior of Electrogalvanized Sheet Steels” Proceedings of Galvatech ‘92, ed. by Centre de Recherches Metallurgiques Verlag Stahleisen, Dusseldorf, Germany 1992 166 170