This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Structural Ceramics in Automotive Engines-Integration of Design, Development and Manufacturing Procedures
Annotation ability available
Sector:
Language:
English
Abstract
This is a descriptive review of the ceramics structural applications developed by Isuzu, Mazda, Nissan, Toyota and General Motors in spark ignition, Diesel and gas turbine automotive engines; new analytical procedures needed for the design of structural ceramics; new silicon nitride ceramics with strength of material properties approaching steel; new ceramics processing techniques which have been reduced to commercial practice in Japan on a mass production scale; and tests of vital structural components fabricated of these ceramics.
Recommended Content
Technical Paper | Electrochemical Metallizing - An Aircraft Turbine Engine Restoration Tool |
Technical Paper | BMW's Magnesium-Aluminium Composite Crankcase, State-of-the-Art Light Metal Casting and Manufacturing |
Aerospace Standard | Propeller Shaft Torque Ratings |
Authors
Citation
Wyczalek, F., Kawamura, H., and Suh, C., "Structural Ceramics in Automotive Engines-Integration of Design, Development and Manufacturing Procedures," SAE Technical Paper 900400, 1990, https://doi.org/10.4271/900400.Also In
References
- ‘1955 Federal Emission Regulations’ US DOT, US Printing Office, Dept of Commerce Washington DC
- ‘Federal Fuel Economy Regulations - (CAFE)’ US DOT, US Printing Office, Dept of Commerce Washington DC
- Roy Rustrum ‘R&D Policy: Japan and the US’ The Journal of Science Policy and Research Management 2 3 1987 196 199 Nihongo
- 1988 International Conference On Strategic R&D Management Organizer-Japan Management Association, Cosponsor-The Society for Science Policy and Research Management (Japan), Tokyo 10-12 May 1988 Nihongo
- Narita Hiroshi ‘Economics and Energy in 21st Century Japan’ Narita Hiroshi 7th EPRI-CRIEPI general meeting, EPRI Journal 12 1 1987 16 19
- Umezu T ‘Perspectives of Japan's 21st Century Economic Society Energy and Electric Power Requirements’ Umezu Terau Long Term Electric Power Policy Study Committee Nihongo
- Wyczalek FA ‘Electric Vehicle Propulsion in Japan’ GMC, Proceedings 22nd IECEC Philadelphia, PA 10-14 Aug 1987 2 956 963
- Wyczalek FA ‘Electric Vehicles, Magnetic Levitation and Superconductive Levitation in Japan’ Proceedings 23rd IECEC Denver, CO 31 Jly 04 Aug 1988 4 265 270
- Wyczalek FA ‘Electric Vehicle Propulsion and Magnetic Levitation’ Future Transportation Technology Conference and Exposition San Francisco, CA 08-11 Aug 1988 SAE # 881168
- Wyczalek FA ‘Electric Vehicle Propulsion and Magnetic Levitation of Automotive Vehicles’ 9th International Electricvehicle Symposium Association Canadienne du Vehicule Electrique Toronto, Canada 13-16 Nov 1988
- The 26th International Tokyo Motor Show 31 Oct 11 Nov 1985 The 27th International Tokyo Motor Show 30 Oct 09 Nov 1987 Harumi Fair Ground, Tokyo
- The 28th International Tokyo Motor Show 25 Oct 06 Nov 1989 Nippon Convention Center Kaihin Makuhari
- Wyczalek FA ‘Piston Engine Configuration Alternatives’ Intl Conf & Expo Det, MI 27 Feb 03 Mar l989 SAE # 890472
- ‘High Technology Ceramics in Japan’ National Materials Advisory Board NMAB-418 Nat'l Academy Press 1984
- Suh CM Tajima Y Kojima T Sato Y NGKSPCo ‘A Gas Pressure Sintered Silicon Nitride (GPSSN) Production Technique, Design and Its Application for the SI Engine’ General Motors Corp, NGK Spark Plug Co Ltd, 3rd International Symposium - Ceramic Materials and Components for Engines 27-30 Nov 1988 Las Vegas NV
- Helms HE Haley PJ Bell AH III ‘Emerging Ceramic Components for Automotive Gas Turbine Engines’ General Motors Corp, 3rd International Symposium - Ceramic Materials and Components for Engines 27 30 Nov 1988 Las Vegas NV
- Okuda H ‘Activity Report of Ceramic Material Special Committee’ 1985 Jr SAE Japan 39 8 946 958 Nihongo
- Hattori Y Tajima Y ‘Development of Structural Ceramics’ NGK Spark Plug Co Ltd 1986 Jr SAE of Japan 40 8 975 979 Nihongo
- Hattori Y Tajima Y Yabuta K Matsuo Y Kawamura M Watanabe T ‘Gas Pressure Sintered Silicon Nitride for Turbocharger Application’ NGK Spark Plug Co Ltd 2nd International Ceramics Symposium Lubeck-Travemunde, FRG 14-17 Ap 1986
- Wakai F Sakaguchi S Matsuno Y ‘Superplasticity of Yttria-Stabilized Tetragonal ZrO2 Polycrystals’ Advanced Ceramic Matls l 3 Jly 1986 259 263
- Wakai F Sakaguchi S kato H ‘Compressive Deformation Properties and Microstructures in the Superplastic Y-TZP’ Yogyo Kyokai-Shi 94 8 1986 721 725 Nihongo
- Updike S Nagle P ‘Ceramic Valve Train Components SAE paper 880441
- Gyekenyesi J Nmemeth N Surface Flaw Reliability Analysis of Ceramic Components with SCARE Finite Element Postprocessor Program NASA Technical Memorandums 88901 and 87188
- Lamon J ‘Statistical Approach to Failure for ceramic Reliability Assessment’ Jr Am Ceramic Society 71 2 l06 112 1988
- Kawamura H ‘Isuzu Ceramic Engine’ Isuzu Ceramics Research Institute Ltd SAE International Congress and Exposition, SAE 880011 29 Feb 04 Mar 1988