This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Power by Wire for Aircraft - The All-Electric Airplane
Annotation ability available
Sector:
Event:
Aerospace Meeting
Language:
English
Abstract
The achievement of a single-power generation distribution and utilization system on future high-performance aircraft will yield many benefits in the form of improved maintainability, reliability, and logistics. It will also reduce aircraft weight and the number of skill catagories required in maintenance training programs. Current aircraft have two parallel and nearly equal-sized secondary power systems (electrical and hydraulic). Of the two, only electrical has the potential for powering all significant functions on the aircraft from radio to landing gear. However, even though electrical power generation and distribution has always been competitive with hydraulic, electrical actuators (utilization) have been heavy and slow. For this reason, hydraulics have for many years monopolized all actuation applications in which power and/or frequency response requirements were moderately high.
With the advent of high specific output, low inertia, rare-earth permanent magnet-type electric motors, the aircraft actuation field was reopened to electric motors. This, in turn, made possible the “all-electric” airplane, and significant power system (generation and distribution system) weight savings. For the B-1 aircraft, used as a typical example in this paper, these savings were on the order of 566 pounds.
Servo-motor versions of these new electric motors will be adequate for most actuation functions. However, certain specific functions on advanced high-performance aircraft will still exceed the motor's capability in terms of power and/or frequency response. It is shown in this paper that the application of a mechanical servo-power package (MSPP) to these functions will meet the power and frequency response requirements, and will save additional weight. The MSPP consists of an electric motor, an adapter gearbox, a flywheel, a mechanical controller, and a mechanical hinge. The MSPP is shown to be capable of meeting high power demands while achieving a frequency response nearly an order of magnitude higher than the electric motor servo design goal. Through the energy storage features of the flywheel, the MSSP is able to save additional weight. On the B-1 aircraft, this weight saving is 1,046 pounds. It is also shown that the total weight savings on the B-1 aircraft, as a result of converting to the “all electric” airplane configuration, is 1,642 pounds.
Recommended Content
Authors
Citation
Helsley, C., "Power by Wire for Aircraft - The All-Electric Airplane," SAE Technical Paper 771006, 1977, https://doi.org/10.4271/771006.Also In
References
- Sawyer B. Edge J. T. “Design of Samarium Cobalt Brushless DC Motor for Electromechanical Actuator Applications,” Proceedings of the IEE 1977 National Aerospace and Electronics Conference (NAECON) Dayton, Ohio May 1977
- Voight A. A. “Electrical Flight Control Systems - Applicable Now,” Proceedings of the IEE 1977 National Aerospace and Electronics Conference (NAECON) Dayton, Ohio May 1977
- Parker R. J. “Rare Earth Permanent Magnets and Energy Conversion Processes,” Proceedings of the IEE 1977 National Aerospace and Electronics Conference (NAECON) Dayton, Ohio May 1977
- Wood N. E. Echols E. F. Ashmore J. H. “Electromechanical Actuation Feasibility Study,” Technical Report AFFDL-TR-76-42 May 1977
- Dreher H. “Analysis of Torodial Actuation Systems for Aerospace Vehicles,” SAE Paper No. 650580
- Harned J. L. Sudhindranath P. Miller K. M. Roddy R. J. “Transfer-Function Derivation and Verification For A Toric Variable-Speed Drive,” ASME Paper No. 60-WA-184 1961
- Harned J. L. Miller K. M. Szlaga E. V. Sudhindranath P. “Precise Power Control Utilizing A New Actuator Concept Emodying All-Mechanical Power Flow,” “Joint Automatic Control Conference,” 1963
- Helsley, C. W. Jr. “Energy Storing Mechanical Power Package For Aircraft Utility Functions,” SAE Paper No. 751178 6 October 1977
- Helsley, C. W. Jr. Call B. J. Crother C. A. “Energy Storage Substation Concepts for Aircraft Actuation Functions,” Technical Report AFAPL-TR-66-29 April 1966
- Helsley C. W. Call B. J. “Experimental Demonstration of Energy Storage Substations for Aircraft Actuation Functions,” Technical Report AFAPL-TR-67-143 December 1967
- Flanigen C. D. “600° F Constant Speed Drives - Mechanical Traction Type,” SAE Paper No. 1020 SAE National Aeronautic Meeting Los Angeles, CA. 1959