This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Determination of Impact Responses of ES-2re and SID-IIs – Part II: SID-IIs
Technical Paper
2018-01-1448
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The main purpose of this study was to determine the impact responses of the different body regions (shoulder, thorax, abdomen and pelvis/leg) of the ES-2re and SID-IIs dummies using rigid wall impacts under different initial test conditions. The experimental set-up consisted of a flat rigid wall with five instrumented load-wall plates aligned with dummy’s shoulder, thorax, abdomen, pelvis and knee impacting a stationary dummy seated on a rigid seat at a pre-determined velocity. The relative location and orientation of the load-wall plates was adjusted relative to the body regions of the ES-2re and SID-IIs dummies respectively. The load-wall forces and dummy responses were primarily evaluated by varying four different test parameters – effect of velocity (initial velocity vs. velocity-time pulse), effect of shoulder engagement (with and without shoulder load-wall plate), effect of initial arm position of the dummy (40 deg. vs. 90 deg.), and effect of oblique loading of thorax by rotating the thorax load-wall plate by 15 deg. Further, the transfer functions between these two dummies for similar impact conditions were derived. Results of this study were reported in three parts: Part I presented determination of impact responses of ES-2re dummy appeared in SAE Paper 18SS-0384; Part III deals with derivation of transfer functions between responses of ES-2re and SID-IIs dummies will be presented in SAE Paper 18SS-0386. This paper addresses Part II pertaining to determination of impact responses of SID-IIs dummy.
Authors
Citation
Aekbote, K., Cheng, J., Belwafa, J., Chou, C. et al., "Determination of Impact Responses of ES-2re and SID-IIs – Part II: SID-IIs," SAE Technical Paper 2018-01-1448, 2018, https://doi.org/10.4271/2018-01-1448.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Byrnes , K. , Abramczyk , J. , Berliner , J. , and Irwin , A. ES-2 Dummy Biomechanical Responses Stapp Car Crash Journal 46 353 396 2002
- Maltese , M.R. , Samaha , R.R. , Eppinger , R.H. , and Strassburg , G. Response of the Eurosid-I Thorax to Lateral Impact SAE Technical Paper No. 1999-01-0709 1999 10.4271/1999-01-0709
- Scherer , R.D. , Kirkish , S.L. , McCleary , J.P. , Rouhana , S.W. et al. SID-IIs Beta Prototype Dummy Biomechanical Responses SAE Technical Paper No. 983151 1998 10.4271/983151
- Sutterfield , A. , Pecoraro , K. , Rouhana , S.W. , Lan , X. et al. Evaluation of the ES-2re Dummy Biofidelity, Component, and Full-Vehicle Crash Tests Stapp Car Crash Journal 49 481 508 2005
- Viano , D. , Fan , A. , Ueno , K. , Waliko , T.J. et al. Biofidelity and Injury Assessment in Eurosid-I and Biosid SAE Technical Paper No. 952731 1995 10.4271/952731
- Aekbote , K. , Cheng , J. , Belwafa , J.E. , Chou , C.C. et al. Determination of Impact Responses of ES-2re and SID-IIs-Part I: ES-2re SAE Technical Paper No. 2018-01-1449 2018 10.4271/2018-01-1449
- Aekbote , K. , Cheng , J. , Belwafa , J.E. , Chou , C.C. et al. Determination of Impact Responses of ES-2re and SID-IIs – Part III: Development of Transfer Functions SAE Technical Paper No. 2018-01-1444 2018 10.4271/2018-01-1444
- ISO/TR 9790 Road Vehicles-Anthropomorphic Side Impact Dummy-Lateral Impact Response Requirements to Assess the Biofidelity of the Dummy New York International Standards Organization, American National Standards Institute 1999
- NHTSA 2005
- NHTSA 2008
- IIHS 2007 www.iihs.org
- Kemper , A.R. , McNally , C. , Kennedy , E.A. , Manoogian , S.J. et al. The Influence of Arm Position on Thoracic Responses in Side Impacts Stapp Car Crash Journal 52 379 420 2008
- Aekbote , K. , Cheng , J. , Wang , C. , Chou , C.C. et al. Critical Comparisons of Responses Between Side Impact MDB and Pole Test Modes Int. J. Vehicle Safety 4 2 2009