This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Curved Beam Based Model for Piston-Ring Designs in Internal Combustion Engines: Closed Shape Within a Flexible Band, Free-Shape and Force in Circular Bore Study
Technical Paper
2018-01-1279
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A new multi-scale curved beam based model was developed for piston-ring designs. This paper describes the free-shape, force in circular bore and closed shape within a flexible band (ovality) related parts. Knowing any one of these distributions, this model determines the other two. This tool is useful in the sense that the characterization of the ring is carried out by measuring its closed shape within a flexible band which is more accurate than measuring its free shape or force distribution in circular bore. Thus, having a model that takes the closed shape within a flexible band as an input is more convenient and useful based on the experiments carried out to characterize the ring.
Recommended Content
Authors
Citation
Bhouri, M. and Tian, T., "Curved Beam Based Model for Piston-Ring Designs in Internal Combustion Engines: Closed Shape Within a Flexible Band, Free-Shape and Force in Circular Bore Study," SAE Technical Paper 2018-01-1279, 2018, https://doi.org/10.4271/2018-01-1279.Also In
References
- Tian , T. Dynamic Behaviors of Piston Rings and Their Practical Impact. Part 1: Ring Flutter and Ring Collapse and Their Effects on Gas Flow and Oil Transport Proc IMechE, Part J: Journal of Engineering Tribology 216 4 209 227 2002 10.1243/135065002760199961
- Tian , T. Dynamic Behaviors of Piston Rings and Their Practical Impact. Part 2: Oil Transport, Friction, and Wear of Ring/Liner Interface and the Effects of Piston and Ring Dynamics Proc IMechE, Part J: Journal of Engineering Tribology 216 4 229 247 2002 10.1243/135065002760199970
- English , C. Kolbenringe 2 64 65
- Muller , R. 1971
- Mierbach , A. 1994
- Ejakov , M.A. , Schock , H.J. , and Brombolich , L.J. Modeling of Ring Twist For an IC Engine SAE Technical Paper 982693 1998
- Liu , L. , Tian , T. , and Rabuté , R. Development and Applications of an Analytical Tool for Piston Ring Design SAE Technical Paper 2003-01-3112 2003 10.4271/982693
- Liu , L. and Tian , T. 2004
- Liu , L. and Tian , T. Modeling Piston Ring-Pack Lubrication With Consideration of Ring Structural Response SAE Technical Paper 2005-01-1641 2005 10.4271/2005-01-1641
- Cheng , C. , Kharazmi , A. , and Schock , H. Modeling of Piston Ring-Cylinder Bore-Piston Groove Contact SAE Technical Paper 2015-01-1724 2015 10.4271/2015-01-1724
- Cheng , C. , Kharazmi , A. , Schock , H. , Wineland , R. , and Brombolich , L. Three-Dimensional Piston Ring-Cylinder Bore Contact Modeling ASME. J. Eng. Gas Turbines Power. 137 11 111505 111510 2015 10.1115/1.4030349
- Baelden , C. 2014
- Baelden , C. and Tian , T. A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities SAE Int. J. Engines 7 1 2014 10.4271/2014-01-1085
- Liu , L. 2005
- Tomanik , E. and Bruno , R. Calculation of Piston Ring Radial Pressure Distribution from its Measured Free Shape SAE Technical Paper 2012-01-1322 2012 10.4271/2012-01-1322
- Liu , Y. 2017
- Liu , Y. and Tian , T. Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 1: Gas Pressure and Dynamic Behavior of Piston Ring Pack SAE Int. J. Engines 10 4 2017 10.4271/2017-01-1043
- Liu , Y. , Li , Y. , and Tian , T. Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 2: Ring-Liner Lubrication SAE Int. J. Engines 10 4 2017 10.4271/2017-01-1047
- Bhouri , M.A. 2017