This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study of Starting Friction during the Running of Plain Journal Bearing under Hydrodynamic Lubrication Regime
Technical Paper
2018-01-0838
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Study of starting friction during the running of the engineering application has an important role in designing them, especially working at low speed and high load conditions. A significant portion of research and development today is concentrated on saving the energy by reducing the friction. The present paper addresses the measurement technique and analysis of the starting friction during the running of the journal bearing. The experiments were performed during the hydrodynamic lubrication regime using SAE 15W-30 lubricating oil. A journal bearing having journal diameter as 22 mm, length/diameter ratio 1 and 0.027 mm radial clearance has been designed and fabricated to test the starting friction. Analysis of starting friction and average friction torque during the running of journal bearing was done at 900, 1150, 1400, 1650, 1900, 2150 and 2400 revolution per minute (rpm) speed of the journal at load values of 250, 400 and 500 N. The variation of starting friction with increasing speed of the journal is described by graphs and limiting speed is obtained at which the starting friction begin to decrease. The findings of the present work could be used by bearing user and designers to design the bearings.
Authors
Topic
Citation
Sharma, V., Singh, R., and Chaudhary, R., "Study of Starting Friction during the Running of Plain Journal Bearing under Hydrodynamic Lubrication Regime," SAE Technical Paper 2018-01-0838, 2018, https://doi.org/10.4271/2018-01-0838.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Bouyer , J. and Fillon , M. Experimental Measurement of the Friction Torque on Hydrodynamic Plain Journal Bearings during Start-Up Tribology International 44 772 781 2011 10.1016/j.triboint.2011.01.008
- Sun , D.C. and Xu , J. A Study of the Starting Characteristics of an Unlubricated Journal Bearing Journal of Tribology 117 216 223 1995 10.1115/1.2831230
- Mccarthy , D.M.C. and Glavatskih , S.B. Assessment of Polymer Composites for Hydrodynamic Journal-Bearing Applications Lubrication Science 21 331 341 2009 10.1002/ls.92
- Krithivasan , R. and Khonsari , M.M. Thermally Induced Seizure in Journal Bearings During Startup and Transient Flow Disturbance Journal of Tribology 125 833 841 2003 10.1115/1.1538619
- Ettles , C.M. , Seyler , J. , and Bottenschein , M. Some Effects of Start-Up and Shut-Down on Thrust Bearing Assemblies in Hydro-Generators Measurements of Transient Effects in Thrust Bearings Journal of Tribology 125 824 832 2003 10.1115/1.1576428
- Wang , H. , Liu , Z. , Zou , L. , and Yang , J. Influence of Both Friction and Wear on the Vibration of Marine Water Lubricated Rubber Bearing Wear 376-377 920 930 2017 10.1016/j.wear.2017.02.006
- Harnoy , A. Model-Based Investigation of Friction During Start-Up of Hydrodynamic Journal Bearings Transactions of the ASME, Journal of Tribology 117 667 673 1995 10.1115/1.2831533
- Pistner , C.A. Some Effects of Start-up Transient Loads on Shoe Bearings for Large Hydraulic Pump/turbines Tribology Transactions 39 93 98 1996 10.1080/10402009608983507
- Din , M.D. and Kassfeldt , E. Wear Characteristics with Mixed Lubrication Conditions in a Full Scale Journal Bearing Wear 232 192 198 1999 10.1016/S0043-1648(99)00145-3
- Lu , X. and Khonsari , M.M. On the Lift-off Speed in Journal Bearings Tribology Letters 20 299 305 2005 10.1007/s11249-005-9124-y
- Linjamaa , A. , Lehtovaara , A. , Larsson , R. , Kallio , M. , and Sochting , S. Modelling and Analysis of Elastic and Thermal Deformations of a Hybrid Journal Bearing Tribology International 118 451 457 2016 10.1016/j.triboint.2017.02.029
- Bompos , D.A. and Nikolakopoulos , P.G. Tribological Design of a Multistep Journal Bearing Simulation Modelling Practice and Theory 68 18 32 2016 10.1016/j.simpat.2016.07.002
- Khatri , C.B. and Sharma , S.C. Influence of Textured Surface on the Performance of Non-Recessed Hybrid Journal Bearing Operating with Non-Newtonian Lubricant Tribology International 95 221 235 2016 10.1016/j.triboint.2015.11.017
- Sinanogˇlu , C. , Nair , F. , and Karamiş , M.B. Effects of Shaft Surface Texture on Journal Bearing Pressure Distribution Journal of Materials Processing Technology 168 344 353 2005 10.1016/j.jmatprotec.2005.02.252
- Meng , F.M. , Zhang , L. , Liu , Y. , and Li , T.T. Effect of Compound Dimple on Tribological Performances of Journal Bearing Tribology International 91 99 110 2015 10.1016/j.triboint.2015.06.030
- Kim , H.G. and Jeon , S.I. Effect on Friction of Engine Oil Seal with Engine Oil Viscosity International Journal of Automotive Technology 9 601 606 2008 10.1007/s12239-008-0071-0