This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermal Model of High-Power Lithium Ion Battery Under Freezing Operation
Technical Paper
2018-01-0445
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Lithium ion battery is considered as one of the most possible energy storage equipment for new energy vehicles (EV, HEV, etc.) because of the advantages of long cycle life, high power density and low self-discharge rate. However, under freezing condition high power battery suffers of significant performances losses. For example, they would suffer from significant power capability losses and poor rate performance, which would restrict the availability to delivery or to gain of high current in transient conditions. To evaluate those performance drawbacks and to make an efficient design, good mathematical models are required for system simulation especially for battery thermal management. In this paper, a three-dimensional homogenization thermal model of a 20 Ah prismatic lithium ion battery with LiFePO4 (LFP) cathode is described. This model particularly stresses on the high-ratio discharge property at low-temperature which could capture the shapes and dimensions of cell components and the spatial distributions of the temperatures. First, various discharge tests on one cell are carried out, and then, cell’s parameters and thermal characteristics are obtained. Ultimately, the three-dimensional thermal model for single-cell proposed is shown to be accurate by analyzing the simulation data and test results.
Recommended Content
Authors
Topic
Citation
Xuan, T., Wei, X., Dai, H., and Venturi, M., "Thermal Model of High-Power Lithium Ion Battery Under Freezing Operation," SAE Technical Paper 2018-01-0445, 2018, https://doi.org/10.4271/2018-01-0445.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- VanMierlo , J. and Maggetto , G. Comparison of the Environmental Damage Caused by Vehicles with Different Alternative Fuels and Drive Trains in a Brussels Context J. Automobile Engineering 36 583 593 2003
- Van den Bossche , P. , Vergels , F. , Van Mierlo , J. , Matheys , J. et al. SUBAT, an Assessment of Sustainable Battery Technology Journal of Power Sources 162 913 919 2006
- Tang , X. , Yan , F. , Wei , Y. , and Zhang , M. Encapsulating SnxSb Nanoparticles in Multichannel Graphene-Carbon Fibers as Flexible Anodes to Store Lithium Ions with High Capacities ACS Appl. Mater. Interfaces 7 39 21890 21897 2015
- Samba , A. , Omar , N. , Gualous , H. , Firouz , Y. et al. Development of an Advanced Two-Dimensional Thermal Model for Large Size Lithium-Ion Pouch Cells Electrochimica Acta 117 246 254 2014
- Doughty , D.H. , Butler , P.C. , Jungst , R.G. , and Peter Roth , E. Lithium Battery Thermal Models Journal of Power Sources 110 2 357 363 2002
- Samba , A. , Louahlia-Gualous , H. , Le Masson , S. , and Nörterhäuser , D. Two-Phase Thermosyphon Loop for Cooling Outdoor Telecommunication Equipments Applied Thermal Engineering 50 1 1351 1360 2013
- Al Sakka , M. , Gualous , H. , Van Mierlo , J. , and Culcu , H. Thermal Modeling and Heat Management of Supercapacitor Modules for Vehicle Applications Journal of Power Sources 194 2 581 587 2009
- Inui , Y. , Kobayashi , Y. , Watanabe , Y. , Watase , Y. et al. Simulation of Temperature Distribution in Cylindrical and Prismatic Lithium Ion Secondary Batteries Energy Conversion and Management 48 7 2103 2109 2007
- Bernardi , D. , Pawlikowski , E. , and Newman , J. A General Energy Balance for Battery Systems J. Electrochem. Soc 132 5 12 1985
- Remmlinger , J. , Buchholz , M. , Meiler , M. , Bernreuter , P. , and Dietmayer , K. State-Of-Health Monitoring of Lithium-Ion Batteries in Electric Vehicles by On-Board Internal Resistance Estimation Journal of Power Sources 196 12 5357 5363 2011
- Guo , G. , Long , B. , Cheng , B. , Zhou , S. et al. Three-Dimensional Thermal Finite Element Modeling of Lithium-Ion Battery in Thermal Abuse Application Journal of Power Sources 195 8 2393 2398 2010
- Gümüşsu , E. , Ekici , Ö. , and Köksal , M. 3-D CFD Modeling and Experimental Testing of Thermal Behavior of a Li-Ion Battery Applied Thermal Engineering 120 484 495 2017
- Chen , S.C. , Wan , C.C. , and Wang , Y.Y. Thermal Analysis of Lithium-Ion Batteries Journal of Power Sources 140 1 111 124 2005
- Samba , A. , Omar , N. , Gualous , H. , Firouz , Y. et al. Development of an Advanced Two-Dimensional Thermal Model for Large Size Lithium-Ion Pouch Cells Electrochimica Acta 117 246 254 2014