This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Investigation on the Fuel Temperature Variations Along a Solenoid Operated Common-Rail Ballistic Injector by Means of an Adiabatic 1D Model
Technical Paper
2018-01-0275
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Most studies about common-rail diesel injection consider the fuel flow along the injector as isothermal. This hypothesis is arguable given the small diameter of the orifices along which the fuel flows, together with the expansions that take place across them. These phenomena may provoke variations in the fuel temperature, which in turn modify the fuel properties (i.e. viscosity, density, speed of sound…), thus influencing injector dynamics as well as the fuel atomization and mixing processes. The present investigation accounts for these effects by means of a 1D model for the fuel flow along a common-rail ballistic injector. Local variations of fuel temperature and pressure are considered by the model thanks to the implementation of the adiabatic flow hypothesis. The model, validated against experimental results, allows to estimate the fuel temperature changes along the injector, including the fuel temperature at the injector outlet, as well as the influence of the thermal effects on the injection rate shape. Results show a significant influence of the fuel temperature and its changes on injection rate and duration, especially for low fuel temperatures at the injector inlet, typical of engine cold-start conditions.
Recommended Content
Technical Paper | Liquid Jet Atomization and Droplet Breakup Modeling of Non-Evaporating Diesel Fuel Sprays |
Technical Paper | Diesel Fuel Injection Viewed as a Jet Phenomenon |
Authors
Citation
Payri, R., Salvador, F., Carreres, M., and Belmar-Gil, M., "An Investigation on the Fuel Temperature Variations Along a Solenoid Operated Common-Rail Ballistic Injector by Means of an Adiabatic 1D Model," SAE Technical Paper 2018-01-0275, 2018, https://doi.org/10.4271/2018-01-0275.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Lefèbvre , A.H. Atomization and Sprays CRC Press 1988 978-0891166030
- Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill 1998 0-26-2020068
- Park , S.H. , Yoon , S.H. , and Lee , C.S. Effects of Multiple-Injection Strategies on Overall Spray Behavior, Combustion, and Emissions Reduction Characteristics of Biodiesel Fuel Applied Energy 88 1 88 98 2011 10.1016/j.apenergy.2010.07.024
- Wang , X. , Huang , Z. , Zhang , W. , Kuti , O.A. et al. Effects of Ultra-High Injection Pressure and Micro-Hole Nozzle on Flame Structure and Soot Formation of Impinging Diesel Spray Applied Energy 88 5 1620 1628 2011 10.1016/j.apenergy.2010.11.035
- Roisman , I.V. , Araneo , L. , and Tropea , C. Effect of Ambient Pressure on Penetration of a Diesel Spray International Journal of Multiphase Flow 33 8 904 920 2007 10.1016/j.ijmultiphaseflow.2007.01.004
- Gumus , M. , Sayin , C. , and Canakci , M. The Impact of Fuel Injection Pressure on the Exhaust Emissions of a Direct Injection Diesel Engine Fueled with Biodiesel-Diesel Fuel Blends Fuel 95 486 494 2012 10.1016/j.fuel.2011.11.020
- Agarwal , A.K. , Dhar , A. , Gupta , J.G. , Kim , W.I. et al. Effect of Fuel Injection Pressure and Injection Timing of Karanja Biodiesel Blends on Fuel Spray, Engine Performance, Emissions and Combustion Characteristics Energy Conversion and Management 91 302 314 2015 10.1016/j.enconman.2014.12.004
- Von Kuensberg Sarre , C. , Kong , S. , and Reitz , R. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays SAE Technical Paper 1999-01-0912 1999 10.4271/1999-01-0192
- Payri , R. , Molina , S. , Salvador , F.J. , and Gimeno , J. A Study of the Relation between Nozzle Geometry, Internal Flow and Spray Characteristics in Diesel Fuel Injection Systems KSME Int. J. 18 7 1222 1235 2004 10.1007/BF02983297
- Som , S. , Ramirez , A.I. , Longman , D.E. , and Aggarwal , S.K. Effect of Nozzle Orifice Geometry on Spray, Combustion, and Emission Characteristics under Diesel Engine Conditions Fuel 90 3 1267 1276 2011 10.1016/j.fuel.2010.10.048
- Bianchi , G.M. , Falfari , S. , Pelloni , P. , Kong , S.C. et al. Numerical Analysis of High-Pressure Fast-Response Common Rail Injector Dynamics SAE Technical Paper 2002-01-0213 2002 10.4271/2002-01-0213
- Arpaia , A. , Catania , A. , Ferrari , A. , and Spessa , E. Development and Application of an Advanced Numerical Model for CR Piezo Indirect Acting Injection Systems SAE Technical Paper 2010-01-1503 2010 10.4271/2010-01-1503
- Marcer , R. , Audiffren , C. , Viel , A. , Bouvier , B. , et al. rd 2010
- Plamondon , E. and Seers , P. Development of a Simplified Dynamic Model for a Piezoelectric Injector Using Multiple Injection Strategies with Biodiesel/Diesel-Fuel Blends Applied Energy 131 411 424 2014 10.1016/j.apenergy.2014.06.039
- Payri , R. , Climent , H. , Salvador , F.J. , and Favennec , A.G. Diesel Injection System Modelling. Methodology and Application for a First-Generation Common Rail System Proc. IMechE, Part D: J. Automob. Eng. 218 1 81 91 2004 10.1243/095440704322829191
- Salvador , F.J. , Gimeno , J. , De la Morena , J. , and Carreres , M. Using one-Dimensional Modeling to Analyze the Influence of the Use of Biodiesels on the Dynamic Behavior of Solenoid-Operated Injectors in Common Rail Systems: Results of the Simulations and Discussion Energy Conversion and Management 54 1 122 132 2012 10.1016/j.enconman.2011.10.007
- Salvador , F.J. , Plazas , A.H. , Gimeno , J. , and Carreres , M. Complete Modelling of a Piezo Actuator Last-Generation Injector for Diesel Injection Systems International Journal of Engine Research 15 1 3 19 2014 10.1177/1468087412455373
- Salvador , F.J. , Marti-Aldaravi , P. , Carreres , M. , and Jaramillo , D. An Investigation on the Dynamic Behaviour at Different Temperatures of a Solenoid Operated Common-Rail Ballistic Injector by Means of a one-Dimensional Model SAE Technical Paper 2014-01-1089 2014 10.4271/2014-01-1089
- Catania , A. , Ferrari , A. , Manno , M. , and Spessa , E. Thermal Effect Simulation in High-Pressure Injection System Transient Flows SAE Technical Paper 2004-01-0532 2004 10.4271/2004-01-0532
- Seykens , X.L.J. , Somers , L.M.T. , and Baert , R.S.G. 2004
- Theodorakakos , A. , Strotos , G. , Mitroglou , N. , Atkin , C. et al. Friction-Induced Heating in Nozzle Hole Micro-Channels under Extreme Fuel Pressurization Fuel 123 143 150 2014 10.1016/j.fuel.2014.01.050
- Strotos , G. , Koukouvinis , P. , Theodorakakos , A. , Gavaises , M. et al. Transient Heating Effects in High Pressure Diesel Injector Nozzles Int. J. Heat Fluid Fl. 51 257 267 2015 10.1016/j.ijheatfluidflow.2014.10.010
- Salvador , F.J. , Gimeno , J. , Carreres , M. , and Crialesi-Esposito , M. Experimental Assessment of the Fuel Heating and the Validity of the Assumption of Adiabatic Flow through the Internal Orifices of a Diesel Injector Fuel 188 442 451 2017 10.1016/j.fuel.2016.10.061
- LMS Imagine. 2014
- Desantes , J. , Arrègle , J. , and Rodríguez , P. Computational Model for Simulation of Diesel Injection Systems SAE Technical Paper 1999-01-0915 1999 10.4271/1999-01-0915
- Lichtarowicz , A. , Duggins , R.K. , and Markland , E. Discharge Coefficients for Incompressible Non-cavitating Flow through Long Orifices Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 7 2 210 219 10.1243/JMES_JOUR_1965_007_029_02
- Soteriou , C. , Andrews , R. , and Smith , M. Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization SAE Technical Paper 950080 1995 10.4271/950080
- Desantes , J.M. , Salvador , F.J. , Carreres , M. , and Jaramillo , D. Experimental Characterization of the Thermodynamic Properties of Diesel Fuels over a Wide Range of Pressures and Temperatures SAE International Journal of Fuels and Lubricants 8 1 190 199 2015 10.4271/2015-01-0951
- Huang , D. , Simon , S.L. , and McKenna , G.B. Chain Length Dependence of the Thermodynamic Properties of Linear and Cyclic Alkanes and Polymers The Journal of Chemical Physics 122 084907 2005 10.1063/1.1852453
- Bell , I.H. , Wronski , J. , Quoilin , S. , and Lemort , V. Pure and Pseudo-Pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp Industrial and Engineering Chemistry Research 53 6 2498 2508 2014 10.1021/ie4033999
- Chorazewski , M. , Dergal , F. , Sawaya , T. , Mokbel , I. et al. Thermophysical Properties of Normafluid (ISO 4113) over Wide Pressure and Temperature Ranges Fuel 105 440 450 2013 10.1016/j.fuel.2012.05.059
- Kouzel , B. How pressure affects liquid viscosity Hydrocarbon Process. Petrol. Refiner 44 3 120 1965
- Bosch , W. The Fuel Rate Indicator: A New Measuring Instrument for Display of the Characteristics of Individual Injection SAE Technical Paper 660749 1966 10.4271/660749