This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Reliability Study of Micro-Perforated Elements in Small Engine Silencer Application
Technical Paper
2017-32-0075
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Since the introduction of microperforated (MP) sound absorption elements more than 40 years ago many variations of noise control devices from room acoustics to induct applications have been manufactured based on this technology.
It has been demonstrated that micro-perforated elements can provide adequate IC-engine gas exchange noise attenuation. Several exhaust and inlet system silencers incorporating micro-perforated elements have been presented during the past 15 years for engine applications, encouraging the replacement of the typical fibrous materials and aiming several advantages including cleaner environment.
The acoustical characteristics of the MP elements, have been studied thoroughly by several authors and good analytical models exist to predict the attenuation performance of those elements. However, almost no published information can be found regarding the reliability of the MP elements utilized in harsh engine exhaust system environment.
In this paper the reliability of stainless still MP element designed for small engine exhaust systems is critically studied, with the focus on the durability of the acoustical performance.
Authors
Citation
Rämmal, H. and Lavrentjev, J., "Reliability Study of Micro-Perforated Elements in Small Engine Silencer Application," SAE Technical Paper 2017-32-0075, 2017, https://doi.org/10.4271/2017-32-0075.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles Official Journal of the European Union 2013
- UN Vehicle Regulations, Regulation No. 41, Uniform provisions concerning the approval of motor cycles with regard to noise 2012
- Åbom , M. An Introduction to Flow Acoustics 164 2004
- Müller , G. Möser , M. Handbook of Engineering Acoustics 978-3-540-24052-5 10.1007/978-3-540-69460-1 Springer-Verlag Berlin Heidelberg 2013
- Maa , D.Y. Theory and design of Microperforated-panel sound-absorbing construction Sci Sin XVIII 1975 55 71
- Maa , D.Y. Potential of microperforated panel absorber J Acoust Soc Am 104 5 1998 2861 2866
- Wu , M.Q. Micro-perforated panels for duct silencing Noise Control Eng J 45 2 1997 69 77
- Yairi , M , Sakagami , K , Morimoto , M , Minemura , A Acoustical properties of microperforated panel absorbers with various configurations of the back cavity Proceeding of ICSV12 Lisbon, Portugal 2005
- Allam , S. , Abom , M. A New Type of Muffler Based on Microperforated Tubes J. Vib. Acoust. 2011 133 3 8
- Kabral , R. , Rämmal , H. , and Lavrentjev , J. Acoustic Studies of Micro-Perforates for Small Engine Silencers SAE Technical Paper 2012-32-0107 2012 10.4271/2012-32-0107
- Kabral , R. ; Rämmal , H. ; Auriemma , F. ; Luppin , J. ; Koiv , R. ; Tiikoja , H. ; Lavrentjev , J. A Novel Design for Cruiser Type Motorcycle Silencer Based on Micro-Perforated Elements SAE Technical Paper 2012-32-0109 2012
- Herrin , D. , Liu , J and Seybert , A. Properties and Applications of Microperforated Panels Sound & Vibration July 2011
- Kabral , R. ; Rämmal , H. ; Lavrentjev , J. ; Auriemma , F. 2011 Acoustic Studies on Small Engine Silencer Elements SAE Technical Paper Series 514 1 8 10.4271/2011-32-0514 2011
- Bolton , J Stuart ; Lee , Seungkyu ; and Martinson , Paul A. Design of Multi-Chamber Silencers with Microperforated Elements, Publications of the Ray W. Herrick Laboratories Paper 106 2014
- http://sontech.se
- Auriemma , F. , Rammal , H. , and Lavrentjev , J. Micro-Grooved Elements - A Novel Solution for Noise Control SAE Int. J. Mater. Manf. 6 3 599 610 2013 https://doi.org/10.4271/2013-01-1941
- Auriemma , F. Acoustic performance of micro-grooved elements Applied Acoustics 122 July 128 137 10.1016/j.apacoust.2017.02.019 2017
- Auriemma , F. A double-layer acoustic absorber as potential substitute for traditional micro-perforated elements The Journal of the Acoustical Society of America 141 5 2017
- Liu , J. and Herrin , D. Effect of Contamination on Acoustic Performance of Microperforated Panels SAE Int. J. Passeng. Cars - Mech. Syst. 4 2 1156 1161 2011 https://doi.org/10.4271/2011-01-1627
- Lavrentjev , J. ; Rämmal , H. On experimental techniques to determine acoustic performance of small exhaust silencers SAE Technical Paper Series, 1-6, 2009-32-0015 2009
- Majak , J. ; Pohlak , M. ; Eerme , M. ; Velsker , T. Design of car frontal protection system using neural networks and genetic algorithm Mechanika 18 4 453 460 2012
- Pohlak , M. ; Majak , J. ; Eerme , M. Optimization of Car Frontal Protection Systems Küttner , R. Proceedings of the 6th international conference of DAAAM Baltic industrial engineering 24-26th april 2008 Tallinn, Estonia 123 128 2008
- Karjust , K. ; Pohlak , M. ; Majak , J. Adhesion process optimization in reinforced composites Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering 19-21st April 2012 Tallinn, Estonia 633 638 2012
- Rämmal , H. ; Abom , M. Characterization of Air Terminal Device Noise Using Acoustic 1-Port Source Models Journal of Sound and Vibration 300 727 743 2007
- Tiikoja , H. ; Lavrentjev , J. ; Rämmal , H. ; Åbom , M. Experimental Investigations of Sound Reflection from Hot and Subsonic Flow Duct Termination Journal of Sound and Vibration 333 3 788 800 2014