This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Performance Modification of Three Cylinder Diesel Engine Ge-Rotor Oil Pump through Rotor and PRV System
Technical Paper
2017-28-1934
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Current high rating thermal loaded engines must have super-efficient lubrication system to provide clean oil at appropriate pressure and appropriate lube oil temperature to every part of the engine at all engine RPM speeds and loads. So oil pump not only have to satisfy above parameters but also it should be durable till engine life. Gerotor pumps are internal rotary positive-displacement pumps in which the outer rotor has one tooth more than the inner rotor. The gear profiles have a cycloidal shape. Both are meshed in conjugate to each other. Gerotor takes up engine power through crankshaft and deliver to various engine consumers at required pressure and required time. Over the complete engine rpm speed and loads range, oil pump need to perform efficiently to provide proper functioning of the engine. Otherwise low oil pressure leads to more friction in the pump, seizure of bearings and final failure of the engine .High oil pressure can lead to failure in oil filter, gaskets and seal. In this aspect pressure relief passage having huge importance to maintain suitable oil pressure in the system at hot and cold environmental conditions. Not only it regulates correct flow but also if properly optimize can reduce power consumption by the pump and the engine. Hence the different oil pump critical design parameters are reviewed in three cylinder diesel engine to have better performance of oil pump in terms of reduction of friction but without causing reduction in the flow of the main oil gallery. The design was validated in the engine test bench and found increase of 11% in oil pressure is being realized at 2250 rpm
Authors
Citation
Thakur, A., Alam, M., Kumar PS, V., Kulkarni, P. et al., "Performance Modification of Three Cylinder Diesel Engine Ge-Rotor Oil Pump through Rotor and PRV System," SAE Technical Paper 2017-28-1934, 2017, https://doi.org/10.4271/2017-28-1934.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Mancò , S. , Nervegna , N. , Rundo , M. , Armenio , G. et al. Gerotor Lubricating Oil Pump for IC Engines SAE Technical Paper 982689 1998 10.4271/982689
- Mancò , S. , Nervegna , N. , and Rundo , M. Effects of Timing and Odd/Even Number of Teeth on Noise Generation of Gerotor Lubricating Pumps for IC Engines SAE Technical Paper 2000-01-2630 2000 10.4271/2000-01-2630
- Loganathan , S. , Sivanantham , R. , and kumar , J. Investigations on Reduction of Power Consumption of Oil Pump for New Advanced Multijet Diesel Engine SAE Technical Paper 2009-01-1463 2009 10.4271/2009-01-1463
- Kita , M. , Wakabayashi , M. , and Honjo , K. New 12L 6WA1TC Turbocharged Diesel Engine SAE Technical Paper 930718 1993 10.4271/930718
- Haas , A. , Esch , T. , Fahl , E. , Kreuter , P. et al. Optimized Design of the Lubrication System of Modern Combustion Engines SAE Technical Paper 912407 1991 10.4271/912407
- Evans , P. and Johanson , K. The System Performance Benefits of Lubrication Flow Control SAE Technical Paper 2004-01-2687 2004 10.4271/2004-01-2687