This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
P/M Valve Seat Inserts: Air Quenching and Characterization
Technical Paper
2017-01-5014
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This work consists of evaluating the influence of heat treatment on sintered valve seat insert (VSI) obtained with two different high-speed steels powders and one tool steel: AISI M3:2, AISI M2 and AISI D2, respectively. The high-speed / tool steel powders were mixed with iron powders and additives such as manganese sulphide, zinc stearate, graphite and niobium carbide. All the high-speed / tool steel powders had its particle size distribution and morphology analyzed. The heat treatment of the VSI consisted of air quenching followed by double tempering it in seven different and equidistant temperatures, ranging from 100 °C until 700 °C. A data acquisition system with a thermocouple type k attached to the samples was used to determine the air-quenching cooling rate. The mechanical and physical properties measurements were carried out, i.e., apparent density, apparent hardness and crush radial strength. The microstructural evaluation consisted of etching the VSI and then analyzing it using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The results showed that the VSI obtained with the AISI M3:2 and M2 high-speed steel powders mixtures showed the best results regarding its apparent hardness and crush radial strength after air quenching and double tempering it at 600 °C.
Recommended Content
Authors
- Maurilio Pereira Gomes - Nuclear and Energy Research Institute
- Igor Santos - Nuclear and Energy Research Institute
- Camila Couto - Nuclear and Energy Research Institute
- Cristiano Mucsi - Nuclear and Energy Research Institute
- Jesualdo Luiz Rossi - Nuclear and Energy Research Institute
- Marco Colosio - General Motors do Brasil Ltda
Topic
Citation
Gomes, M., Santos, I., Couto, C., Mucsi, C. et al., "P/M Valve Seat Inserts: Air Quenching and Characterization," SAE Technical Paper 2017-01-5014, 2017, https://doi.org/10.4271/2017-01-5014.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Chang , I. and Zhao , Y. Advances in Powder Metallurgy: Properties, Processing and Applications Woodhead Publishing UK 2013 978-1-84569-531-6
- Jesus Filho , E. S. , Salgado , L. , Jesus , S. L. , Rossi , J. L. , Colosio , M. A. and Santos , J. C. Machining and Mechanical Characterisation of PM Materials for Valve Seat Inserts Materials Science Forum Zurich 498-99 79 84 2005 10.4028/www.scientific.net/MSF.498-499.79
- Sector Group of Powder Metallurgy The Powder Metallurgy: Economical Alternative with Lower Environmental Impact Brazil Metallum Eventos Técnicos 2009 978-85-62404-00-9
- Whittaker , D. The PM Structural Parts Industry - Past Growth and Future Prospects Metal Powder Report 14 22 1999 10.1016/S0026-0657(00)86723-5
- Whittaker , D. Process Economic and Technological Advances in P/M Automotive Parts The International Journal of Powder Metallurgy 1998 34 4 53 62 0888-7462
- Myers , K. Hard-Wearing Iron-Base Alloy is Soft on the Pocket Materials World 1999 7 12 755 756 0967-8638
- Jesus Filho , E. S. , Jesus , E. R. B. , Salgado , L. , Colosio , M. A. , Santos , J. C. , Yoshida , S. , Sartori , C. H. and Rossi , J. L. Sintered Valve Seat Inserts - Microstructural Characterization Materials Science Forum 2006 530 0-1 65 70 10.4028/www.scientific.net/MSF.530-531.65
- Santos , I. P. and Rossi , J. L. Sintered Steels for use in Valve Seat Inserts - Processing and Characterization In Proceedings of the 21 st Congresso Brasileiro de Engenharia e Ciências dos Materiais 2014, Nov 9-13 Cuiabá, MT, Brazil 4366 4373 2175-1781
- Michael , B. ASM Metals Reference Book: A Handbook of Data and Information ASM International 1981 0-87170-134-0
- Mahaidin , A. A. , Selamat , M. A. , Manaf , S. A. and Jaafar , T. R. Physical and Mechanical Properties of WC-Co Submicron Powders Using P/M Technique Advanced Materials Research 2014 879 9 180 183 10.4028/www.scientific.net/AMR.879.12
- Bayer , A. M. and Becherer , B. A. High-Speed Tool Steels In ASM Handbook, Volume 16: Machining ASM International 1989 51 59
- Roberts , G. , Krauss , G. and Kennedy , R. Tool Steels 5 th 1998 1 6
- Krauss , G. Steels: Heat Treatment and Processing Principles ASM International 1990 0-87170-370-X
- German , R. M. Powder Metallurgy of Iron and Steel Wiley-Interscience Publication USA 1998 0-471-15739-2
- American Society for Testing and Materials (ASTM) Standard Test Method for: Brinell Hardness of Metallic Materials ASTM E 10-01 ASTM International 2004 10.1520/E0010-01
- American Society for Testing and Materials (ASTM) Standard Test Method for: Water Absorption, Bulk Density, Apparent Porosity and Apparent Specific Gravity of Fired Whiteware Products ASTM C 373-88 ASTM International 2004 10.1520/C0373-88R06
- Metal Powder Industries Federation (MPIF) Method for Determination of Crush Radial Strength MPIF Standard 35 Metal Powder Industries Federation 2009 978-0-9819496-0-4
- Moura , S. C. , Coelho , F. P. and Bustillos , J. O. V. Characterization of Carbon, Sulfur and Volatile Compounds in Nuclear Fuel U 3 Si 2 -Al Proceedings of the International Nuclear Atlantic Conference 2013; Nov 24-29 Recife, PE, Brazil 01 05 978- 85- 99141- 05-2
- Cullity , B. D. and Stock , S. R. Elements of X-ray Diffraction Pearson 2014 978-1-292-04054-7
- Girolami , G. S. X-ray Crystallography University Science Books 2016 978-1-891389-77-1
- Warren , B. E. X-ray Diffraction Dover Publications 1990 0-486-66317-5
- Höganas - Handbook for Sintered Components Volume 6: Metallography Höganas AB 2007
- German , R. M. Powder Metallurgy Science Metal Powder Industries Federation 1994 978-1-878954-42-8
- Jesus Filho , E. S. Processing, Machining and Wearing of Sintered Alloys for Automotive Application [Thesis] São Paulo IPEN-USP 2006
- Santos , I. P Processing and Characterization of Sintered Steels for use in Valve Seat Inserts [Dissertation] São Paulo IPEN-USP 2014
- Gomes , M. P. , Santos , I. P. , Mucsi , C. S. , Colosio , M. A. and Rossi , J. L. Study of the Mechanical and Metallurgical Properties of Sintered Steels for Valve Seat Inserts Application Proceedings of the VII Encontro Científico de Física Aplicada 2016 Mai 11-13 Serra, ES, Brazil 59 61 10.5151/phypro-vii-efa-015