This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study on Lubrication Characteristics and Influence Factors of Connecting Rod Big End Bearing for Non - Road Horizontal Diesel Engine
Technical Paper
2017-01-2422
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The assembly of con rod bearing and crankpin is a key friction pair which offers an important guarantee for stable operation of diesel engine. Specific to the non-road 2-cylinder diesel engine developed independently and based on the theory of thermoelastohydrodynamic lubrication as well as multi-body dynamics, this paper establishes a multi-body dynamics model for con rod big end bearings of the 2D25 horizontal diesel engine and makes a research on the influence of bearing width, bearing clearance, and oil inlet position and diameter upon lubrication of con rod bearing, taking into consideration that of the surface appearance of bearing bush and the elastic deformation of bearing bush and axle journal upon the same. Research results show that bearing width and bearing clearance are the major factors that influence lubrication characteristics of con rod bearing while oil inlet position and diameter only have a small influence on such characteristics. An optimization scheme for con rod bearing is selected through orthogonal test: bearing clearance of 0.042mm, bearing width of 33mm, oil inlet position of 285° and oil inlet diameter of φ7mm. After optimization, the minimum oil film thickness is remarkably increased by 43.72% while the average total frictional power consumption and peak oil film pressure show very little change compared to the original scheme.
Authors
Citation
Li, N., Huang, F., Bi, Y., Xu, Y. et al., "Study on Lubrication Characteristics and Influence Factors of Connecting Rod Big End Bearing for Non - Road Horizontal Diesel Engine," SAE Technical Paper 2017-01-2422, 2017, https://doi.org/10.4271/2017-01-2422.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 |
Also In
References
- Taylor C M Engine tribology [J] Tribology International 1993 30 6 464 465
- Fantino , B. , Frene , J. , and du Parquet , J. Viscosity Effects on the Dynamic Characteristics of an Elastic Engine Bearing SAE Technical Paper 852074 1985 10.4271/852074
- Bates T W , Vickars M A Measurement of oil film thickness in big-end bearings and its relevance to engine oil viscosity classifications [J] Lubrication Science 1991 3 4 233 256
- Aitken M B , Mccallion H Elastohydrodynamic lubrication of big - end bearings Part 1: theory [J] ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996 (vols 203-210) 1991 205 23 99 106
- Aitken M B , Mccallion H Elastohydrodynamie Lubrication of Big-End Bearings Part 2: Ratification [J] Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1991 205 23 107 119
- Karimaei H , Chamani H Study of Cavitation and Wear Damages in Conrod Big End Bearing of a Heavy Duty Diesel Engine by Using Elasto-Hydrodynamic Method[C] ASME 2009 Internal Combustion Engine Division Fall Technical Conference 2009 553 565
- Blais T M Analysis of Con Rod Bearing Design Trends Using a Mode-Based Elastohydrodynamic Lubrication Model [D] New York Rochester Institute of Technology 2013
- Piffeteau S , Souchet D , Bonneau D Influence of Thermal and Elastic Deformations on Con-Rod Big End Bearing Lubrication Under Dynamic Loading [J] Journal of Tribology 2000 122 1 181 191
- Kim B J , Kim K W Thermo-Elastohydrodynamic Analysis of Con Rod Bearing in Internal Combustion Engine[J] Journal of Tribology 2001 123 3 473 478
- Chamani H , Karimaei H , Bahrami M et al. Thermo-elastohydrodynamic (TEHD) analysis of oil film lubrication in big end bearing of a diesel engine[J] Journal of Computational and Applied Research in Mechanical Engineering 2015 1 5 13 24
- Zhao X Y , Sun J , Liu L P et al. Lubrication Performance of Crankshaft Bearing for Internal Combustion Engine at Different Working Condition [J] Transactions of CSICE 2011 29 4 348 354
- Jia D W , Shen L Z , Bi Y H et al. A Study on the Factors Affecting the Lubrication Characteristics of Con Rod Big-end Bearing in Diesel Engine[J] Automotive Engineering 2013 11 981 983
- Zhu X P , Liu Z T , Zhang P W et al. Lubricating simulation analysis of con rod bearing based on AVL EXCITE [J] Journal of Mechanical & Electrical Engineering 2012 29 2 142 145
- Wichtl , R. , Schneider , M. , Grabner , P. , and Eichlseder , H. Experimental and Simulative Friction Analysis of a Fired Passenger Car Diesel Engine with Focus on the Cranktrain SAE Int. J. Engines 9 4 2227 2241 2016 10.4271/2016-01-2348
- Torii H , Nakakubo T , Nakada M Elastohydrodynamic Lubrication of a Con Rod Journal Bearing in Consideration of Shapes of the Bearing[J] Reproduction Nutrition Development 1992 44 5 493 8
- Ozasa , T. , Yamamoto , M. , Suzuki , S. , Nozawa , Y. et al. Elastohydrodynamic Lubrication Model of Connecting Rod Big End Bearings; Comparison with Experiments by Diesel Engine SAE Technical Paper 952549 1995 10.4271/952549
- Liu L P , Sun J , Cai X X et al. Effect of Operating Conditions on Lubrication Performance of Con Rod Bearings for Internal Combustion Engine[J] Bearing 2010 5 30 33
- Qiao Y Lubrication Characteristics Analysis of the Con Rod Big End Bearing Based on the Test and Simulation [D] Jinan Shandong University 2014
- Shayler , P. , Cheng , L. , Li , Q. , and Wahab , E. A Modified Oil Lubrication System with Flow Control to Reduce Crankshaft Bearing Friction in a Litre 4 Cylinder Diesel Engine SAE Technical Paper 2016-01-1045 2016 10.4271/2016-01-1045
- Knauder C , Allmaier H , Sander D et al. Analysis of the Journal Bearing Friction Losses in a Heavy-Duty Diesel Engine[J] Lubricants 2015 3 2 142 154
- Allmaier , H. and Offner , G. Current Challenges and Frontiers for the EHD Simulation of Journal Bearings: a Review SAE Technical Paper 2016-01-1856 2016 10.4271/2016-01-1856
- Sander D E , Allmaier H , Priebsch H H et al. Impact of high pressure and shear thinning on journal bearing friction[J] Tribology International 2015 81 81 29 37
- Wen S Z Elastohydrodynamic Lubrication [M] Beijing Tsinghua University Press 1992
- Wen S Z Principles of tribology [M] Beijing Tsinghua University Press 2008