This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis on the Influence of Key Parameters of Control Valve on the Performance Characteristics of Electromagnetic Injector
Technical Paper
2017-01-2310
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The control valve is the most important implementation part of a high pressure common rail system, and its flow characteristics have a great influence on the performance of an injector. In this paper, based on the structure and the working principle of an electromagnetic injector in a high pressure common rail system, a simulation model of the injector is established by AMESim software. Some key parameters of the control valve, including the volume of the control chamber, the diameter of the orifice Z (feeding orifice), the diameter of the orifice A (discharge orifice) and the hole diameter of the fuel diffusion hole are studied by using this model. The results show that these key structural parameters of the control valve have a great influence on the establishment of the control chamber pressure and the action of the needle valve. Within a certain range, when the control chamber volume is small, the control chamber pressure changes rapidly, the needle moves quickly, the system reacts quickly; increasing the diameter of the orifice Z (feeding orifice) facilitates the closing speed of the needle valve but reduces the opening speed of the needle valve; increasing the diameter of the orifice A (discharge orifice), the valve opening speed accelerates, closing delay time unchanged; increasing the diameter of the fuel diffusion hole, the needle closing time increases, the fueling duration time is prolonged and the fuel injection quantity increases. On the basis of this, the cavitation problem at the sealing seat of the control valve sleeve in the common rail injector is simulated by CFD simulation, and the process of cavitation is deduced. In the existing structure, it is possible to reduce the cavitation phenomenon by increasing the length of the fuel diffusion hole of the control valve.
Authors
Topic
Citation
Jia, X., Sun, B., Wu, D., Xu, D. et al., "Analysis on the Influence of Key Parameters of Control Valve on the Performance Characteristics of Electromagnetic Injector," SAE Technical Paper 2017-01-2310, 2017, https://doi.org/10.4271/2017-01-2310.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Qiu Tao , Dai Hefei , Lei Yan et al Dynamic flow behavior during fuel-offloaded process in control valve for unit pump fuel system Applied Thermal Engineering 106 2016 153 160
- Wu , D. , Sun , B. , Xu , D. , An , X. et al. Study on Pressure Fluctuation of a Constant Pressure Fuel System SAE Technical Paper 2017-01-0828 2017 10.4271/2017-01-0828
- Wang Chao , Li Guo-Xiu , Sun Zuo-Yu et al. Effects of structure parameters on flow and cavitation characteristics within control valve of fuel injector for modern diesel engine Energy Conversion and Management 124 2016 104 115
- Salvador FJ , MartÃnez-Lopez J , Caballer M et al. Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods Energy Convers Manage 2013 66 246 56
- Molina S , Salvador FJ , Carreres M et al. A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles Energy Convers Manage 2014 79 114 27
- Hattori S. , Kitagawa T. Analysis of cavitation erosion resistance of cast iron and nonferrous metals based on database and comparison with carbon steel data Wear 269 2010 443 448
- Matevz D. , Bernd B. , Bernda S. , Brane S. Relationship between cavitation structures and cavitation damage Wear 257 2004 1176 1184
- Gavaises , M. , Papoulias , D. , Andriotis , A. , Giannadakis , E. et al. Link Between Cavitation Development and Erosion Damage in Diesel Injector Nozzles SAE Technical Paper 2007-01-0246 2007 10.4271/2007-01-0246
- Coppo Marco , Dongiovanni Claudio , Negri Claudio numerical analysis and experimental investigation of a common rail type diesel injector ICEF2002-507
- Xia S.H. , Zheng J.B. , Miao X.L. , Ju Y.S. , Wu S. , Hou X.J. Cavitation analysis on ball valve in solenoid injector Trans. CSICE 30 4 2012 354 358
- Duan Lian , Yuan Shouqi , Hu L.F. et al Cavitation Analysis of Control-valve in High-pressure Common Rail Injector Ttansactions of the Chinese Society for Agricultural Machinery 10.6041/j.issn.1000-1298.2015.05.045
- Salvador , F. , Marti-Aldaravi , P. , Carreres , M. , and Jaramillo , D. An Investigation on the Dynamic Behaviour at Different Temperatures of a Solenoid Operated Common-Rail Ballistic Injector by means of a One-Dimensional Model SAE Technical Paper 2014-01-1089 2014 10.4271/2014-01-1089
- Bianchi , G. , Falfari , S. , Parotto , M. , and Osbat , G. Advanced Modeling of Common Rail Injector Dynamics and Comparison with Experiments SAE Technical Paper 2003-01-0006 2003 10.4271/2003-01-0006
- YANG Hai-tao , GUO Li-xin , SONG Yong-ping , JU Yu-sheng Investigation of Flow Characteristics Control Valve in Common Rail Injector MODERN VEHICLE POWER 4
- WANG Ling-yun , YU Jian-da , CAI Zhen-hui , XU Ping Research on Common Rail Injector’s Hydraulic Process MODERN VEHICLE POWER 1
- XIE Li-zhe , ZHANG You-tong , Li Pi-mao et al. Influence of Control Chamber Volume on Injection Law for Common Rail Injector MODERN VEHICLE POWER 2
- De Giorgi , M. , Ficarella , A. , and Breitbach , H. Cavitation Effects and Transient Behavior for the Control Valve of a High-Pressure Diesel Injection System SAE Technical Paper 2001-01-1979 2001 10.4271/2001-01-1979
- Gao H. , Fu X. , Yang H.Y. , TSukiji T. Numerical and experimental investigation of cavitating flowing in oil hydraulic ball valve The Fifth JFPS International Symposium on Fluid Power Nara, Japan November12-15, 2002 923 928
- Qiu T. , Lei Y. , Peng J. , Li X.C. , Li B. Investigation of cavitation phenomenon within flow field of solenoid control valve for unit pump Trans. CSICE 31 4 2013 367 372
- BOSCH Cavitation erosion optimised ball seat valve [P] EP 2290272 A2 2010