This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Investigation on the Effects of Injection Strategy on Combustion and Emission in a Heavy-Duty Diesel Engine Fueled with Gasoline
Technical Paper
2017-01-2266
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Gasoline partially premixed combustion shows the potential to achieve clean and high-efficiency combustion. Injection strategies show great influence on in-cylinder air flow and in-cylinder fuel distribution before auto-ignition, which can significantly affect the combustion characteristics and emissions. This study explored the effects of various injection strategies, including port fuel injection (PFI), single direct injection (DIm), double direct injection (DIp+DIm) and port fuel injection coupled with a direct injection (PFI+DIm) on the combustion characteristics and emissions in a modified single cylinder heavy-duty diesel engine fueled with 92# gasoline at low load. The investigation consists of two parts. Firstly, the comparison among PFI, PFI+DIm, and DIp+DIm strategies was conducted at a fixed CA50 to explore the effects of PFI+DIm and DIp+DIm strategies on the thermal efficiency and combustion stability. The results show that the coefficient of variation (COV) of indicated mean effective pressure (IMEP) with PFI+DIm and DIp+DIm strategies is lower than that of PFI strategy. High thermal efficiency can be achieved while still maintaining low NOx and soot emissions by using PFI+DIm strategy. Injection timings of DIm and DIp have strong effects on concentration stratification. Next, in order to explore the behavior of PFI+DIm and DIp+DIm strategies in improving the controllability of auto-ignition and combustion phasing, DIm timings of PFI+DIm, DIp+DIm and DIm strategies were swept from 9 to MAX°CA BTDC (limited by peak pressure rise rate and in-cylinder pressure). The results show that PFI+DIm and DIp+DIm strategies have significant advantages in controlling CA5 and CA50 over a wide stable operation range.
Authors
Citation
Yang, B., Wang, H., Yao, M., Zheng, Z. et al., "Experimental Investigation on the Effects of Injection Strategy on Combustion and Emission in a Heavy-Duty Diesel Engine Fueled with Gasoline," SAE Technical Paper 2017-01-2266, 2017, https://doi.org/10.4271/2017-01-2266.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Dec J E Advanced compression-ignition engines-understanding the in-cylinder processes Proceedings of the Combustion Institute 32 2 2727 2742 2009 10.1016/j.proci.2008.08.008
- Zhao , F. , Asmus , T. W. , Dec , J. E. , Eng , J. A. et al. Homogeneous Charge Compression Ignition (HCCI) Engines-Key Research and Development Issues 5 1 817 826 2003
- (Bill) Gray ,, A. and Ryan ,, T. Homogeneous Charge Compression Ignition (HCCI) of Diesel Fuel SAE Technical Paper 971676 1997 10.4271/971676
- Kiplimo , R. , Tomita , E. , and Kawahara , N. Yokobe S. Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine Applied Thermal Engineering 37 165 75 2012 10.1016/j.applthermaleng.2011.11.011
- Battin-Leclerc , F. Detailed chemical kinetic models for the low-temperature combustion of hydrocarbons with application to gasoline and diesel fuel surrogates Progress in Energy and Combustion Science 34 4 440 498 2008 10.1016/j.pecs.2007.10.002
- Splitter , D. , Hanson , R. , Kokjohn , S. , and Reitz , R. Improving engine performance by optimizing fuel reactivity with a dual fuel PCCI strategy Conference on Thermo and Fluid Dynamic Processes in Diesel Engines 2010 Valencia, Spain
- Musculus , M. Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine SAE Technical Paper 2006-01-0079 2006 10.4271/2006-01-0079
- Noehre , C. , Andersson , M. , Johansson , B. , and Hultqvist , A. Characterization of Partially Premixed Combustion SAE Technical Paper 2006-01-3412 2006 10.4271/2006-01-3412
- Manente , V. , Johansson , B. , and Cannella , W. Gasoline partially premixed combustion, the future of internal combustion engines International Journal of Engine Research 12 3 194 208 2011 10.1177/1468087411402441
- Tang , Q. , Liu , H. , Li , M. , Yao , M. et al. Optical study of spray-wall impingement impact on early-injection gasoline partially premixed combustion at low engine load Applied Energy 185 708 719 2017 10.1016/j.apenergy.2016.10.108
- Manente , V. , Zander , C. , Johansson , B. , Tunestal , P. et al. An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially Premixed Combustion SAE Technical Paper 2010-01-2198 2010 10.4271/2010-01-2198
- Manente , V. , Johansson , B. , Tunestal , P. , and Cannella , W. Effects of Different Type of Gasoline Fuels on Heavy Duty Partially Premixed Combustion SAE Int. J. Engines 2 2 71 88 2010 10.4271/2009-01-2668
- Manente , V. , Zander , C. , Johansson , B. , Tunestal , P. et al. An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially Premixed Combustion SAE Technical Paper 2010-01-2198 2010 10.4271/2010-01-2198
- Manente , V. , Johansson , B. , and Tunestal , P. Half load partially premixed combustion, PPC, with high octane number fuels. gasoline and ethanol compared with diesel Symposium on International Automotive Technology Siat 295 2009
- Tuner , M. , Johansson , T. , Aulin , H. , Tunestal , P. et al. Multi Cylinder Partially Premixed Combustion Performance Using Commercial Light-Duty Engine Hardware SAE Technical Paper 2014-01-2680 2014 10.4271/2014-01-2680
- Zheng , Z. , Wang , X. , Zhong , X. , Hu , B. et al. Experimental study on the low temperature combustion of biodiesel/n-butanol, biodiesel/ethanol and biodiesel/2,5-dimethylfuran on a diesel engine Energy 115 539 549 2016 10.1016/j.energy.2016.09.054
- Zheng , Z. , Wang , X. , Yue , L. , Liu , H. et al. Effects of six-carbon alcohols, ethers and ketones with chain or ring molecular structures on diesel low temperature combustion Energy Conversion & Management 124 480 491 2016 10.1016/j.enconman.2016.07.057
- Zou , X. , Wang , H. , Zheng , Z. , Reitz , R. et al. Numerical Study of the RCCI Combustion Processes Fuelled with Methanol, Ethanol, n-Butanol and Diesel SAE Technical Paper 2016-01-0777 2016 10.4271/2016-01-0777
- Li , C. , Yin , L. , Shamun , S. , Tuner , M. et al. Transition from HCCI to PPC: the Sensitivity of Combustion Phasing to the Intake Temperature and the Injection Timing with and without EGR SAE Technical Paper 2016-01-0767 2016 10.4271/2016-01-0767
- Dempsey , A. B. , Curran , S. , Wagner , R. , and Cannella , W. Effect of Premixed Fuel Preparation for Partially Premixed Combustion With a Low Octane Gasoline on a Light-Duty Multicylinder Compression Ignition Engine Journal of Engineering for Gas Turbines and Power 137 11 111506 111506 2015 10.1115/1.4030281
- Shen , M. , Lonn , S. , and Johansson , B. Transition from HCCI to PPC Combustion by Means of Start of Injection SAE Technical Paper 2015-01-1790 2015 10.4271/2015-01-1790
- Zhang , F. , Yu , R. , and Bai , X. Effect of split fuel injection on heat release and pollutant emissions in partially premixed combustion of PRF70/air/EGR mixtures Applied energy 149 283 296 2015 10.1016/j.apenergy.2015.03.058
- Qiu , L. , Cheng , X. , Liu , B. , Dong , S. et al. Partially premixed combustion based on different injection strategies in a light-duty diesel engine Energy 96 155 165 2016 10.1016/j.energy.2015.12.052
- Yang , B. , Yao , M. , Zheng , Z. , and Yue , L. Experimental investigation of injection strategies on low temperature combustion fueled with gasoline in a compression ignition engine Journal of Chemistry 2015 1 10 2015 10.1155/2015/207248
- Wang , Y. , Wei , L. , and Yao , M. A theoretical investigation of the effects of the low-temperature reforming products on the combustion of n -heptane in an HCCI engine and a constant volume vessel Applied Energy 181 132 139 2016 10.1016/j.apenergy.2016.08.066