This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Cylinder Pressure Correction Method Based on Calculated Polytropic Exponent
Technical Paper
2017-01-2252
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The acquisition of more authentic cylinder pressure data is the basis of engine combustion analysis. Due to the multiple advantages, quartz piezoelectric pressure transducers are generally applied to the measurement of the cylinder pressure. However, these transducers can only produce dynamic cylinder pressure data which may be significantly different from the actual values. Thus, the cylinder pressure data need to be corrected through a certain method, while different cylinder pressure correction methods will cause result divergences of the combustion analysis. This paper aims to acquire a proper cylinder pressure correction method by carrying out theoretical analysis based on the polytropic process in the compression stroke as well as the experimental research of the cylinder pressure of a turbocharged eight-cylinder diesel engine. The method presented in this paper can not only get a polytropic exponent with higher accuracy by calculation but also revise the cylinder pressure curve at the same time. A further experimental research on this engine shows that the value of the polytropic exponent fluctuates from 1.33 to 1.38 at different working conditions, and is hardly associated with the engine load. However, the value of the polytropic exponent becomes bigger along with the increase of the engine speed.
Recommended Content
Authors
Topic
Citation
Sun, W., Du, W., Dai, X., Bai, X. et al., "A Cylinder Pressure Correction Method Based on Calculated Polytropic Exponent," SAE Technical Paper 2017-01-2252, 2017, https://doi.org/10.4271/2017-01-2252.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Payri , F. , Luján , J. , Martín , J. , Abbad , A. Digital signal processing of in-cylinder pressure for combustion diagnosis of internal combustion engines Mechanical Systems and Signal Processing 24 2010 1767 1784 2010 10.1016/j.ymssp.2009.12.011
- Olt , J. , Mikita , V. , Roots , J. , Jasinskas , A. Cylinder pressure characteristics of turbocharged and naturally aspirated diesel engines Procedia Engineering 100 2015 350 359 2015 10.1016/j.proeng.2015.01.378
- Brunt , M. , Rai , H. , and Emtage , A. The Calculation of Heat Release Energy from Engine Cylinder Pressure Data SAE Technical Paper 981052 1998 10.4271/981052
- Desantes , J. , Galindo , J. , Guardiola , C. , Dolz , V. Air mass flow estimation in turbocharged diesel engines from in-cylinder pressure measurement Experimental Thermal and Fluid Science 34 2010 37 47 2010 10.1016/j.expthermflusci.2009.08.009
- Cavina , N. and Ponti , F. Air fuel ratio estimation using in-cylinder pressure frequency analysis Gas turbines power 125 3 812 819 2003 10.1115/1.1563242
- Lapuerta , M. , Armas , O. , and Hernández , J. Diagnosis of DI diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas Applied thermal engineering 19 1999 513 529 1999 10.1016/S1359-4311(98)00075-1
- de Melo , T. , Machado , G. , Machado , R. , Belchior , C. et al. In Cylinder Pressure Curve Simulation On Multifuel Engines - A Comparison Between A Polytrophic And General Thermodynamic Model For Gasoline, Ethanol And Natural Gas SAE Technical Paper 2007-01-2820 2007 10.4271/2007-01-2820
- Beasley , M. , Cornwell , R. , Fussey , P. , King , R. et al. Reducing Diesel Emissions Dispersion by Coordinated Combustion Feedback Control SAE Technical Paper 2006-01-0186 2006 10.4271/2006-01-0186
- Shimasaki , Y. , Kobayashi , M. , Sakamoto , H. , Ueno , M. et al. Study on Engine Management System Using In-cylinder Pressure Sensor Integrated with Spark Plug SAE Technical Paper 2004-01-0519 2004 10.4271/2004-01-0519
- Amann , C. Classical Combustion Diagnostics for Engine Research SAE Technical Paper 850395 1985 10.4271/850395
- Sellnau , M. , Matekunas , F. , Battiston , P. , Chang , C. et al. Cylinder-Pressure-Based Engine Control Using Pressure-Ratio-Management and Low-Cost Non-Intrusive Cylinder Pressure Sensors SAE Technical Paper 2000-01-0932 2000 10.4271/2000-01-0932
- Brunt , M. and Platts , K. Calculation of Heat Release in Direct Injection Diesel Engines SAE Technical Paper 1999-01-0187 1999 10.4271/1999-01-0187
- Randolph , A. Methods of Processing Cylinder-Pressure Transducer Signals to Maximize Data Accuracy SAE Technical Paper 900170 1990 10.4271/900170
- Brunt , M. and Pond , C. Evaluation of Techniques for Absolute Cylinder Pressure Correction SAE Technical Paper 970036 1997 10.4271/970036
- Davis , R. and Patterson , G. Cylinder Pressure Data Quality Checks and Procedures to Maximize Data Accuracy SAE Technical Paper 2006-01-1346 2006 10.4271/2006-01-1346
- Lee , K. , Kwon , M. , Sunwoo , M. , and Yoon , M. An In-Cylinder Pressure Referencing Method Based on a Variable Polytropic Coefficient SAE Technical Paper 2007-01-3535 2007 10.4271/2007-01-3535
- Fanelli , I. , Camporeale , S. , and Fortunato , B. Efficient On-Board Pegging Calculation from Piezo-Electric Sensor Signal for Real Time In-Cylinder Pressure Offset Compensation SAE Int. J. Engines 5 2 672 682 2012 10.4271/2012-01-0901
- Kistler Instrument Operation Instructions for Kistler Type 5219A 1990
- Shen , W. , Jiang , Z. , and Tong , J. Engineering Thermodynamics Reference Book, Third Edition Higher Education Press 2001 90 107 7-04-009314-6