This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Helmholtz Resonator Effect of the Trunk Cavity in the Acoustic Response of a Sedan
Technical Paper
2017-01-1842
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
To prevent trunk lid slam noise, reactive openings are used in the trunk cavities of passenger vehicles. In sedans, the trunk cavity and the cabin cavity are coupled acoustically through the discontinuities on the parcel shelf and/or the rear seat. In such a case, these openings behave as necks of a Helmholtz resonator, which in turn change the acoustic response of the system. In this study, the Helmholtz resonator effect of the trunk cavity is discussed analytically through a simplified cavity model. A case study, where the acoustic response of a sedan is analyzed through a computational model considering the resonator effect is also given. Sound pressure levels show that instant pressure drops and damping effects observed in the acoustic response can be explained with the resonator effect. Results obtained from the computational model of the sedan are verified with the track test measurements.
Authors
Citation
Oktav, A., Yilmaz, C., and Anlas, G., "The Helmholtz Resonator Effect of the Trunk Cavity in the Acoustic Response of a Sedan," SAE Technical Paper 2017-01-1842, 2017, https://doi.org/10.4271/2017-01-1842.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Pimpalkhare , N. , Kumar , G. , Vaddi , Y. , and Jain , C. Interior Noise Reduction in a Passenger Vehicle through Mode Modulation of Backdoor SAE Technical Paper 2016-28-0058 2016 10.4271/2016-28-0058
- Chatterjee , J. , Talwar , H. , and Garg , S. An Experimental Study of Mechanism of Body Panel Vibration in Booming Noise Reduction of Passenger Vehicles SAE Technical Paper 2016-28-0198 2016 10.4271/2016-28-0198
- Sung , S. , Chao , S. , Lingala , H. , and Mundy , L. Structural-Acoustic Analysis of Vehicle Body Panel Participation to Interior Acoustic Boom Noise SAE Technical Paper 2011-01-0496 2011 10.4271/2011-01-0496
- Sung , S. , Nefske , D. , Le-The , H. , and Bonarens , F. Development and Experimental Evaluation of a Vehicle Structural-Acoustic Trimmed-Body Model SAE Technical Paper 1999-01-1798 1999 10.4271/1999-01-1798
- Sheng , G. Vehicle Noise, Vibration, and Sound Quality Warrendale SAE International 2012 9780768034844
- Ahn , C.-G. , Choi , H. G. and Lee , J. M. Structural-Acoustic Coupling Analysis of Two Cavities Connected by Boundary Structures and Small Holes Journal of Vibration and Acoustics 127 6 566 574 2005 10.1115/1.2110880
- Pietrzyk , A. and Bengtsson , T. An Investigation of the Coupling Between the Passenger Compartment and the Trunk in a Sedan SAE Technical Paper 2007-01-2356 2007 10.4271/2007-01-2356
- Sung , S. , Chao , S. , Lingala , H. , and Mundy , L. Structural-Acoustic Analysis of Vehicle Body Panel Participation to Interior Acoustic Boom Noise SAE Technical Paper 2011-01-0496 2011 10.4271/2011-01-0496
- Oktav , A. , Anlaş , G. , and Yılmaz , Ç. The Effect of the Folding Rear-Seat Aperture in the Acoustic Response of a Sedan Car Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231 2 253 266 2017
- Lee , S. , Park , K. , Sung , S. H. , and Nefske , D. J. Validation of an Acoustic Finite Element Model of an Automobile Passenger Compartment ASME 2009 International Mechanical Engineering Congress and Exposition November 13-19, 2009 Lake Buena Vista, Florida, USA 10.1115/IMECE2009-10843
- Lee , S. , Park , K. , Sung , S. , and Nefske , D. Boundary Condition Effect on the Correlation of an Acoustic Finite Element Passenger Compartment Model SAE Int. J. Mater. Manuf. 4 1 708 715 2011 10.4271/2011-01-0506
- Lee , J. W. , and Lee , J. M. Forced Vibro-Acoustical Analysis for a Theoretical Model of a Passenger Compartment with a Trunk-Part 2: Experimental Part Journal of Sound and Vibration 299 4 918 932 2007 10.1016/j.jsv.2006.07.023
- Ingard , U. On the Theory and Design of Acoustic Resonators The Journal of the Acoustical Society of America 25 6 1037 1061 1953
- Melling , T.H. The Acoustic Impendences of Perforates at Medium and High Sound Pressure Levels Journal of Sound and Vibration 29 1 1 65 1973
- Chanaud , R. C. Effects of Geometry on the Resonance Frequency of Helmholtz Resonators Journal of Sound and Vibration 178 3 337 348 1994
- Ronneberger , D. The Acoustical Impedance of Holes in the Wall of Flow Ducts Journal of Sound and Vibration 24 1 133 150 1972
- Selamet , A. and Radavich P. M. The Effect of Length on the Acoustic Attenuation Performance of Concentric Expansion Chambers: An Analytical, Computational and Experimental Investigation Journal of Sound and Vibration 201 4 407 426 1997
- Li , D. and Cheng , L. Acoustically Coupled Model of an Enclosure and a Helmholtz Resonator Array Journal of Sound and Vibration 305 1 272 288 2007
- Nair , S.U. , Shete , C.D. , Subramoniam , A. , Handoo , K.L. and Padmanabhan , C. Experimental and Computational Investigation of Coupled Resonator-Cavity Systems Applied Acoustics 71 1 61 67 2010
- Yu , X. , Cheng , L. , and Guyader , J.-L. Modeling Vibro-Acoustic Systems Involving Cascade Open Cavities and Micro-Perforated Panels The Journal of the Acoustical Society of America 136 2 659 670 2014
- Chintapalli , V. R. , and Padmanabhan , C. Design Relations and Simplified Reactance Formulas for Multi-Orifice Helmholtz Resonators Acta Acustica united with Acustica 101 1 124 133 2015
- Cheng , L Interior Sound and Vibration Control for Air Vehicle Applications 23rd International Conference on Sound and Vibration Athens July 2016
- The International Organization for Standardization (ISO) Acoustics Measurement of Noise Inside Motor Vehicles ISO 5128 1980
- Kruntcheva , M. R. Acoustic-Structural Resonances of Thin-Walled Structure-Gas Systems Journal of Vibration and Acoustics 128 6 722 731 2006 10.1115/1.2345679
- Sanderson , M. and Onsay , T. CAE Interior Cavity Model Validation using Acoustic Modal Analysis SAE Technical Paper 2007-01-2167 2007 10.4271/2007-01-2167