This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Automated Calibration for Compressor Recirculation Valve Control
Technical Paper
2017-01-0594
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Turbocharger compressors are susceptible to surge – the instability phenomena that impose limitations on the operation of turbocharged engines because of undesired noise, engine torque capability constraints, and hardware strain. Turbocharged engines are typically equipped with a binary compressor recirculation valve (CRV) whose primary function is to prevent compressor surge. Calibration of the associated control strategy requires in-vehicle tests and usually employs subjective criteria. This work aims to reduce the calibration effort for the strategy by developing a test procedure and data processing algorithms. An automated calibration for CRV control is developed that will generate a baseline calibration that avoids surge events. The effort to obtain the baseline calibration, which can be further fine-tuned, is thereby significantly reduced. Procedures are developed for testing and analysis that combines a previously developed surge characterization method with unconstrained nonlinear optimization. An adaptive algorithm is also presented that can update the CRV control calibration online. The developed procedures are demonstrated on vehicle data and compared with manually obtained calibrations.
Recommended Content
Authors
Citation
Xiao, B., Hellstrom, E., Wang, Y., Buckland, J. et al., "Automated Calibration for Compressor Recirculation Valve Control," SAE Technical Paper 2017-01-0594, 2017, https://doi.org/10.4271/2017-01-0594.Also In
References
- Yi , J. , Wooldridge , S. , Coulson , G. , Hilditch , J. Development and Optimization of the Ford 3.5L V6 EcoBoost Combustion System SAE Int. J. Engines 2 1 1388 1407 2009 10.4271/2009-01-1494
- Watson , N. and Janota , M.S. Turbocharging the Internal Combustion Engine Macmillan London, UK 1982
- Thomasson , A. and Eriksson , L. Co-surge in bi-turbo engines: Measurements, analysis and control Control Eng. Pract 32 113 122 2014
- Ossareh , H. , Buckland , J. and Jankovic , M. Continuous compressor recirculation to improve boost response and mitigate compressor surge in turbocharged gasoline engines American Control Conference (ACC) 2016 10.1109/ACC.2016.7526161
- Figurella N. Effect of inlet guide vanes on centrifugal compressor acoustics. INTER-NOISE and NOISE-CON Congress and Conference Proceedings 246 1 Institute of Noise Control Engineering 2013
- Hellström , E. , Ossareh , H. , Xiao , B. , and Santillo , M. Characterizing and Detecting Surge and Co-Surge in Automotive Compressors. 8 th IFAC Symposium on Advances in Automotive Control Norrköping Sweden 2016
- Galindo , J. , Serrano , J. , Guardiola , C. , and Cervello , C. 2006 Surge limit definition in a specific test bench for the characterization of automotive turbochargers Exp. Therm. Fluid Sci 30 5 449 462
- Andersen , J. , Lindström , F. , and Westin , F. 2009 Surge definitions for radial compressors in automotive turbochargers SAE Int. J. Engines 1 1 218 231
- Bozza , F. and De Bellis , V. Steady and Unsteady Modeling of Turbocharger Compressors for Automotive Engines SAE Technical Paper 2010-01-1536 2010 10.4271/2010-01-1536
- Bozza , F. , De Bellis , V. , Marelli , S. , and Capobianco , M. 1D Simulation and Experimental Analysis of a Turbocharger Compressor for Automotive Engines under Unsteady Flow Conditions SAE Int. J. Engines 4 1 1365 1384 2011 10.4271/2011-01-1147
- De Bellis , V. , Bozza , F. , Marelli , S. , and Capobianco , M. Experimental Investigation and 1D Simulation of a Turbocharger Compressor Close to Surge Operation SAE Int. J. Engines 8 4 1866 1878 2015 10.4271/2015-01-1720
- Lagarias , J.C. , Reeds J. A. , Wright M. H. , and Wright P. E. Convergence Properties of the Nelder-Mead Simplex Method in Low Dimensions SIAM Journal of Optimization 9 1 112 147 1998