This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Joining Dissimilar Materials by Magnetic Pulse Welding
Technical Paper
2017-01-0474
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In this study, a proposed new 3-in-1 process using the magnetic pulse welding (MPW) for welding similar and dissimilar metals and for hybrid joining between FRC and metals is developed. Welding between (a) AA1199 sheets and XES, (b) AA1199 and XSG which is zinc coated steel, (c) 5754-aluminum alloy and XES were performed and (d) hybrid joint between PA66-glass-FRC and 5754-aluminum was achieved. SEM observations and EDX analysis for the weld interface between aluminum and steel showed where detectable very thin layers of intermetallics and the wavy interface pattern typical for impact welding was identified. X-Ray microtomography observation for the joining region in the FRC showed the good state of the composite structure after joining. 3D numerical simulation using LS-Dyna was used for the selection of the welding parameters. Quasi-static lap shear testing for the welds revealed a failure in the weak metal sheet and not in the weld.
Recommended Content
Authors
Citation
Khalil, C., Amosse, Y., and Racineux, G., "Joining Dissimilar Materials by Magnetic Pulse Welding," SAE Technical Paper 2017-01-0474, 2017, https://doi.org/10.4271/2017-01-0474.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Messler , RW Joining of Materials and Structures: From Pragmatic Process to Enabling Technology 2004 0-7506-7757-0
- Grote , KH , and Antonsson EK Springer Handbook of Mechanical Engineering 2009 978-3-540-49131-6
- Gould , JE Joining Aluminum Sheet in the Automotive industry—A 30 Year History Weld. J 2012 https://app.aws.org/wj/supplement/WJ_2012_01_s23.pdf
- Wagner , M , Jahn A , and Standfuβ J Innovative Joining Technologies for Multi-Material Lightweight Car Body Structures 2014
- Kumar , N , Mishra RS , and Yuan W Friction Stir Welding of Dissimilar Alloys and Materials 2015 978-0-12-802418-8
- Manogaran , Arun Prasath Développement de Procédé de Soudage Par Point Par Impulsion Électromagnétique- Assemblage Hétérogène Al/Fe Ecole Centrale de Nantes Nantes, France 2013
- Agudo , Leonardo , Eyidi Dominique , Schmaranzer Christian H. , Arenholz Enno , Jank Nasrin , Bruckner Jürgen , and Pyzalla Anke R. Intermetallic Fe X Al Y -Phases in a steel/Al-Alloy Fusion Weld Journal of Materials Science 42 12 June 5 2007 4205 14 10.1007/s10853-006-0644-0
- Blazynski , TZ Explosive Welding, Forming and Compaction 2012 10.1007/978-94-011-9751-9
- Wang , H , Liu D , Taber G , Lippold J C , and Daehn G S Laser Impact Welding - Process Introduction and Key Variables 2012
- Vivek , A. , Hansen S.R. , Liu B.C. , and Daehn Glenn S. Vaporizing Foil Actuator: A Tool for Collision Welding Journal of Materials Processing Technology 213 12 2013 2304 11 10.1016/j.jmatprotec.2013.07.006
- Manoharan , P. , Manogaran , A.P. , Priem , D. , Marya , S. State of the Art of Electromagnetic Energy for Welding and Powder Compaction Welding in the World 57 6 November 19 2013 867 78 10.1007/s40194-013-0080-0
- Miranda , RM , Tomás B , and Santos TG Magnetic Pulse Welding on the Cutting Edge of Industrial Applications Soldagem & Inspeção 2014
- Shribman , V , and Blakely M Benefits of the Magnetic Pulse Process for Welding Dissimilar Metals Welding Journal 2008
- Zittel , G. A Historical Review of High Speed Metal Forming 4th International Conference on High Speed 2010
- Zhang , Y. , Sudarsanam S. B. , Curtis P. , Michael B. , 2011 Application of High Velocity Impact Welding at Varied Different Length Scales Journal of Materials Processing Technology 211 5 Elsevier B.V. 944 52 10.1016/j.jmatprotec.2010.01.001
- Aizawa , T , Okogawa , K Yoshizawa M , and Henmi N. 2001 Impulse Magnetic Pressure Seam Welding of Aluminium Sheets Impact Engineering and Applications.
- Jablonski , J , and Winkler R 1978 Analysis of the Electromagnetic Forming Process International Journal of Mechanical Sciences.
- Leroy , M , and Renaud JY 1980 Formage Électrohydraulique Techniques de L'ingénieur. Génie Mécanique.
- Ken-ichiro , M. , Bay , N. , Fratini , L. , Micari , F. 2013 Joining by Plastic Deformation CIRP Annals - Manufacturing Technology 62 2 673 94 10.1016/j.cirp.2013.05.004
- Verstraete , J , De Waele W , and Faes K. 2011 Magnetic Pulse Welding: Lessons to Be Learned from Explosive Welding Sustainable Construction and Design
- Angshuman , K. , and Sharma , A. 2015 Magnetic Pulse Welding: An Efficient and Environmentally Friendly Multi-Material Joining Technique Journal of Cleaner Production 100 35 58 10.1016/j.jclepro.2015.03.042
- Manogaran , A.P. , Manoharan , P. , Priem , D. , Marya , S. 2014 Magnetic Pulse Spot Welding of Bimetals Journal of Materials Processing Technology 214 6 1236 44 10.1016/j.jmatprotec.2014.01.007
- Ageorges , C , Ye L , and Hou M. 2001 Advances in Fusion Bonding Techniques for Joining Thermoplastic Matrix Composites: A Review Composites Part A: Applied Science and Manufacturing 32 6 Elsevier 839 57
- Marinelli , J M , and Lambing C L T 1994 Advancements in Welding Technology for Composite-to-Metallic Joints Journal of Advanced Materials 25 3 20 27
- Rotheiser , J. 1999 Joining of Plastics: Handbook for Designers and Engineers Carl Hanser Verlag GmbH.
- Budynas , Richard G. , and Keith Nisbett J. , 2011 Shigley's Mechanical Engineering Design Ninth McGraw-Hill
- Chan-Joo , L. , Jung-Min , L. , Ho-Yeon R. , Kyung-Hun L. , 2014 Design of Hole-Clinching Process for Joining of Dissimilar Materials - Al6061-T4 Alloy with DP780 Steel, Hot-Pressed 22MnB5 Steel, and Carbon Fiber Reinforced Plastic Journal of Materials Processing Technology 214 10 2169 78 10.1016/j.jmatprotec.2014.03.032
- Kweon , J. H. , Jae-Woo , J. , Tae-Hwan , K. , Jin-Ho , C. , 2006 Failure of Carbon Composite-to-Aluminum Joints with Combined Mechanical Fastening and Adhesive Bonding Composite Structures 75 1 192 98 10.1016/j.compstruct.2006.04.013
- Kum Cheol , S. , Jeong Ok , L. , and Jung Ju , L. 2003 The Manufacturing Process of Co-Cured Single and Double Lap Joints and Evaluation of the Load-Bearing Capacities of Co-Cured Joints Journal of Materials Processing Technology 138 1 Elsevier 89 96
- Ryosuke , M. , and Motoko S. Akira T. 2008 Improving Performance of GFRP/aluminum Single Lap Joints Using Bolted/co-Cured Hybrid Method Composites Part A: Applied Science and Manufacturing 39 2 154 63 10.1016/j.compositesa.2007.11.009
- Ucsnik , S. , Scheerer M. , Zaremba S. , and Pahr D.H. 2010 Experimental Investigation of a Novel Hybrid Metal- composite Joining Technology Composites Part A: Applied Science and Manufacturing 41 3 369 74 10.1016/j.compositesa.2009.11.003
- Graham , D.P. , Rezai A. , Baker D. , Smith P.A. , and Watts J.F. 2014 The Development and Scalability of a High Strength, Damage Tolerant, Hybrid Joining Scheme for Composite-metal Structures Composites Part A: Applied Science and Manufacturing 64 11 24 10.1016/j.compositesa.2014.04.018
- Wise , R J , and Watson M N 1992 A New Approach for Joining Plastics and Composites to Metals ANTEC 92-Shaping the Future 2113 16 Technomic Publishing Co.
- McKnight , S H , McBride M , and Gillespie J W 1993 Strength of Aluminum and Glass Reinforced Polypropylene Sandwich Single Lap Joints PROCEEDINGS-AMERICAN SOCIETY FOR COMPOSITES 419
- Balle , F , Wagner G , and Eifler D 2007 Ultrasonic Spot Welding of Aluminum Sheet/carbon Fiber Reinforced Polymer--Joints Materialwissenschaft Und Werkstofftechnik 38 11 Wiley Online Library 934 38
- Wise , R J , and Bates A D H 1996 Ultrasonic Welding of Pes to Aluminium Alloy TECHNICAL PAPERS OF THE ANNUAL TECHNICAL CONFERENCE-SOCIETY OF PLASTICS ENGINEERS INCORPORATED 1203 7
- Ramarathnam , G , North , T H Libertucci M , and Woodhams R T 1990 Ultrasonic Bonding of High Strength Polypropylene to Aluminium Misc. SOCIETY OF PLASTICS ENGINEERS BROOKFIELD CENTER CT*
- Jung , K W , Kawahito , Y Takahashi M , and Katayama S 2013 Laser Direct Joining of Carbon Fiber Reinforced Plastic to Zinc-Coated Steel Materials & Design 47 Elsevier 179 88
- Jung , K W , Kawahito Y , and Katayama S 2011 Laser Direct Joining of Carbon Fibre Reinforced Plastic to Stainless Steel Science and Technology of Welding and Joining 16 8 Maney Publishing Suite 1C, Joseph's Well, Hanover Walk, Leeds LS3 1AB UK 676 80
- Moćko , W , Rodríguez-Martínez , J A Kowalewski Z L , and Rusinek A 2012 Compressive Viscoplastic Response of 6082-T6 and 7075-T6 Aluminium Alloys under Wide Range of Strain Rate at Room Temperature: Experiments and Modelling Strain 48 6 498 509 10.1111/j.1475-1305.2012.00847.x
- Rodríguez-Vidal , E. , Lambarri J. , Soriano C. , Sanz C. , and Verhaeghe G. 2014 A Combined Experimental and Numerical Approach to the Laser Joining of Hybrid Polymer - Metal Parts Physics Procedia 56 Elsevier 835 44 10.1016/j.phpro.2014.08.101
- Goushegir , S.M. , dos Santos J.F. , and Amancio-Filho S.T. 2014 Friction Spot Joining of Aluminum AA2024/carbon-Fiber Reinforced Poly(phenylene Sulfide) Composite Single Lap Joints: Microstructure and Mechanical Performance Materials & Design (1980-2015) 54 196 206 10.1016/j.matdes.2013.08.034
- Amancio-Filho , S.T. , Bueno C. , dos Santos J.F. , Huber N. , and Hage E. 2011 On the Feasibility of Friction Spot Joining in Magnesium/fiber-Reinforced Polymer Composite Hybrid Structures Materials Science and Engineering: A 528 10 3841 48 10.1016/j.msea.2011.01.085
- Liu , F. Liao J. , and Nakata K. 2014 Joining of Metal to Plastic Using Friction Lap Welding Materials & Design (1980-2015) 54 236 44 10.1016/j.matdes.2013.08.056
- Racineux G. , Priem D. , Lebrun J-M. , Amosse Y. , Khalil C. Assembly method between a part made of metal material and a part made of organic matrix composite material; corresponding parts made of organic matrix composite material and assembly WO 2016/097656 A1 June 23 2016
- Livermore Software Technology Corporation EM Theory Manual, Electromagnetism and Linear Algebra in LS-Dyna 2012
- Burgess T.J. Electrical resistivity model of metals 4th International conference on Megagauss Magnetic-Field Generation and Related Topics Santa Fe, NM, USA 1986