This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermomechanical Analysis of Diesel Engine Exhaust Manifold
Technical Paper
2016-36-0258
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This study focuses on the Termomechanical Fatigue (TMF) analysis for an exhaust manifold. Bolt tension and temperature field has been applied in order to get variation on stresses, going from room load condition to a full load condition. The temperature field has been acquired from 1D simulation and adjusted to fit experimental values measured on the vehicle. Low cycle fatigue (LCF) has been considered to evaluate the exhaust manifold under the stress cycles produced by temperature fluctuation. Thermal and stress analysis have been performed by Abaqus package. An in-house code has been employed in the fatigue analysis. The bolt torque and the temperature field on the engine and exhaust manifold are the loads considered in the analysis.
Recommended Content
Authors
Topic
Citation
de Azevedo Cardoso, A. and Andreatta, E., "Thermomechanical Analysis of Diesel Engine Exhaust Manifold," SAE Technical Paper 2016-36-0258, 2016, https://doi.org/10.4271/2016-36-0258.Also In
References
- Bhosle , S. Advanced manufacturing processes and materials for exhaust manifold, muffler box and tail pipe Coventry University 2014 10.13140/2.1.4964.6729
- Santacreu , P. , Bucher , L. , Koster , A. , Remy , L. Thermomechanical fatigue of stainless steels for automotive exhaust systems Revue de Metallurgie 2006 37 42
- Rajadurai , S. , Afnas , M. , Ananth , S. , Surendhar , S. Materials for Automotive Exhaust System International Journal of Recent Development in Engineering and Technology 2 3 March 2014
- Sato , E. , Tanoue , T. Present and future trends of materials for automotive exhaust system Nippon Steel Technical report no.64 January 1995
- Kumar , A. , Kumar , A. , Dwivedi , A. , Patil , P. Thermo-Mechanical Analysis of 321-Austenitic Stainless Steel Exhaust Manifolds of a Diesel Engine based on FEA Proceedings. of International Conference on Advances in Communication, Network, and Computing, CNC Elsevier 2014
- Miyazaki , A. , Hirasawa , J. , Furukimi O. Ferritic Stainless Steel for Automotive Exhaust Systems - High Heat-Resistant Ferritic Stainless Steel with High Formability for Automotive Exhaust Manifolds JFE Technical Report, no 4 2004
- Belingardi , G , Leonti , S. Modal analysis in the design of an automotive exhaust pipe International Journal of Vehicle Design 8 475 487 1987
- Sweta , J. , Agrawal , A. Coupled Thermal - “ Structural Finite Element Analysis for Exhaust Manifold of an Off-road Vehicle Diesel Engine International Journal of Soft Computing and Engineering 3 4 Sep. 2013
- Zhaocheng , Y. , Jiayi , M. , Shengcheng , L. , Hua , F Study on the Simulation Design Method About Exhaust Muffler of Vehicle Sound and vibration 14 423 2007
- Zou , B. et.al. The Impact of Temperature Effect on Exhaust Manifold Thermal Modal Analysis Research Journal of Applied Sciences, Engineering and Technology 6 15 2824 2829 2013
- Xu , J.M. , Zhou , S. , Chen , S. An Analysis of the Vibration Characteristics of Automotive Exhaust Systems and Optimization of Suspension Points The Open Mechanical Engineering Journal 8 574 580 2014
- Yuan , Z. , Jiayi , M. , Shengcheng , L. , Hua , F. Study on the simulation design method about exhaust muffler of vehicle Sound and Vibration 423 2007
- Mamiya , N. , Masuda , T. , Noda , Y. Thermal Fatigue Life of Exhaust Manifolds Predicted by Simulation SAE Paper No. 2002-01-0854
- Watanabe , Y. , Shiratani , K. , Iwanaga , S. , Nishino , K. Thermal Fatigue Life Prediction for Stainless Steel Exhaust Manifold SAE Paper No. 980841
- Jane , S. , Agrawal , A. Coupled Thermal - Structural Finite Element Analysis for Exhaust Manifold of an Off-road Vehicle Diesel Engine International Journal of Soft Computing and Engineering (IJSCE) 4 September 2013
- Sehitoglu , H. , Maier Hans J. Thermo-mechanical Fatigue Behavior of Materials 3rd 1998 ASTM Special Technical Publication 1371
- Sehitoglu , H. , Neu , R.W. Thermomechanical Fatigue, Oxidation and Creep: Part I and II. Experiments Metallurgical Transactions 20A 1755 1767 1989
- Taira , S. Fatigue at elevated temperatures ASTM STP 520 ASTM 80 101 1973
- Hazime , R. M. , Dropps , S. H. , Anderson , D. H. , and Ali , M. Y. Transient Non-linear FEA and TMF Life Estimates of Cast Exhaust Manifolds SAE Technical Paper 2003-01-0918 2003
- Morrow , J.D Cyclic plastic strain energy and fatigue of metals ASTM STP378 ASTM Wes Conshohochen, Pa 1965
- ASM Hanbook Fatigue and Fracture 19 730 ASM 1996 0-87170-385-8