This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimization of Multiple Injection Strategies to Improve BSFC Performance of a Common Rail Direct Injection Diesel Engine
Technical Paper
2016-28-0002
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Present stringent emissions norms; global fossil fuel energy scenario and competitive automotive market has driven many researches on diesel engine combustion in both academic and industry level. This work is an effort to improve the fuel economy without compromising emissions level of typical six cylinders inline CRDI diesel engine using optimized multiple injection strategy. There was some unusual nature of BSFC (Brake specific fuel consumption) observed on such typical engine. Also, Torque curve was not up to the mark for better drivability. This engine is equipped with most familiar in cylinder NOx reduction device namely EGR and multiple injections. There were few experiments conducted on same engine to optimize the BSFC using different multi injection strategies in line to marginal change of injection timing with respect to crank angle. Total exercise was done following partial Design of Experiments (DOE). EGR % has kept unaltered. The effects of multiple injection strategies (Pilot-main- After [PMA] and Pilot 2- Pilot - main- After [EPMA]) have been analyzed through this work. The secondary objective of this work is to understand the relationship between injection strategies, BSFC, other performances (torque, Power) and emissions. This study shows significant improvement on BSFC and Torque without affecting other performance parameters and Emissions.
Recommended Content
Authors
Topic
Citation
Biswas, S., Bakshi, M., Shankar, G., and Mukhopadhyay, A., "Optimization of Multiple Injection Strategies to Improve BSFC Performance of a Common Rail Direct Injection Diesel Engine," SAE Technical Paper 2016-28-0002, 2016, https://doi.org/10.4271/2016-28-0002.Also In
References
- Heywood , J. B. Internal Combustion Engine Fundamentals 1998 McGraw-Hill New York
- Zhang , L. A Study of Pilot Injection in a DI Diesel Engine SAE Technical Paper 1999-01-3493 1999 10.4271/1999-01-3493
- Ishida , M. , Chen , Z. , Luo , G. , and Ueki , H. The Effect of Pilot Injection on Combustion in a Turbocharged D. I. Diesel Engine SAE Technical Paper 941692 1994 10.4271/941692
- Carlucci , P. , Ficarella , A. , and Laforgia , D. Effects of Pilot Injection Parameters on Combustion for Common Rail Diesel Engines SAE Technical Paper 2003-01-0700 2003 10.4271/2003-01-0700
- Dürnholz , M. , Endres , H. , and Frisse , P. Preinjection A Measure to Optimize the Emission Behavior of DI-Diesel Engine SAE Technical Paper 940674 1994 10.4271/940674
- Minami , T. , Takeuchi , K. , and Shimazaki , N. Reduction of Diesel Engine NOx Using Pilot Injection SAE Technical Paper 950611 1995 10.4271/950611
- Chen , S. Simultaneous Reduction of NO x and Particulate Emissions by Using Multiple Injections in a Small Diesel Engine SAE Technical Paper 2000-01-3084 2000 10.4271/2000-01-3084
- Badami , M. , Millo , F. , and D'Amato , D. Experimental Investigation on Soot and NOx Formation in a DI Common Rail Diesel Engine with Pilot Injection SAE Technical Paper 2001-01-0657 2001 10.4271/2001-01-0657
- Tow , T. , Pierpont , D. , and Reitz , R. Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine SAE Technical Paper 940897 1994 10.4271/940897
- Pierpont , D. , Montgomery , D. , and Reitz , R. Reducing Particulate and NOx Using Multiple Injections and EGR in a D.I. Diesel SAE Technical Paper 950217 1995 10.4271/950217
- Ryan , T. and Callahan , T. Homogeneous Charge Compression Ignition of Diesel Fuel SAE Technical Paper 961160 1996 10.4271/961160
- Yokota , H. , Kudo , Y. , Nakajima , H. , Kakegawa , T. et al. A New Concept for Low Emission Diesel Combustion SAE Technical Paper 970891 1997 10.4271/970891
- Yamane , K. and Shimamoto , Y. Combustion and emission characteristics of direct-injection compression ignition engines by means of two-stage split and early fuel injection Trans. ASME 2002 124 660 667
- Badami , M. , Mallamo , F. , Millo , F. and Rossi E.E. Experimental investigation on the effet of multiple injection strategies on emissions, noise and brake specific fuel consumption of an automotive direct injection common rail diesel engine Int. J. Engine Research 4 4
- Carlucci , P. , Ficarella , A. and Laforgia , D. Effects on combustion and emissions of early and pilot fuel injections in diesel engines Int. J. Engine Res
- Tennison , P. J. and Reitz , R. D. An experimental investigation of the effects of common-rail injection system parameters on emissions and performance in a high-speed direct-injection diesel engine J. Engng Gas Turbines Power 2001 123 167 174
- Badami , M. , Nuccio , P. , and Trucco , G. Influence of Injection Pressure on the Performance of a DI Diesel Engine with a Common Rail Fuel Injection System SAE Technical Paper 1999-01-0193 1999 10.4271/1999-01-0193
- Nehmer , D. and Reitz , R. Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions SAE Technical Paper 940668 1994 10.4271/940668
- Suh ,. K.H. Study on the twin-pilot-injection strategies for the reduction in Exhaust emissions in a Low -Compression-ratio engine Proc IMechE Part D: J Automobile Engineering 2014 228 3 335 343
- Baert , R. , Beckman , D. , and Veen , A. Efficient EGR Technology for Future HD Diesel Engine Emission Targets SAE Technical Paper 1999-01-0837 1999 10.4271/1999-01-0837
- O'Connor , J. and Musculus , M. Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding SAE Int. J. Engines 6 1 400 421 2013 10.4271/2013-01-0917
- Hessel , R. , Reitz , R. , Musculus , M. , O'Connor , J. et al. A CFD Study of Post Injection Influences on Soot Formation and Oxidation under Diesel-Like Operating Conditions SAE Int. J. Engines 7 2 694 713 2014 10.4271/2014-01-1256
- O'Connor , J. and Musculus , M. Effects of exhaust gas recirculation and load on soot in a heavy-duty optical diesel engine with close-coupled post injections for high-efficiency combustion phasing SAE Int. J. Engines 2014 10.1177/1468087413488767
- O'Connor , J. and Musculus , M. In-Cylinder Mechanisms of Soot Reduction by Close-Coupled Post-Injections as Revealed by Imaging of Soot Luminosity and Planar Laser-Induced Soot Incandescence in a Heavy-Duty Diesel Engine SAE Int. J. Engines 7 2 673 693 2014 10.4271/2014-01-1255
- O'Connor , J. and Musculus , M. Effect of Load on Close-Coupled Post-Injection Efficacy for Soot Reduction in an Optical Heavy-Duty Diesel Research Engine J. Engng Gas Turbines and Power, 136 2014 10.1115/1.4027276
- Yun , H. and Reitz , R. D. An experimental investigation of the effects of Post-Injection Strategies on Combustion and Emissions in the Low Temperature Diesel Combustion Regime J. Engng Gas Turbines Power 2007 129 279 286
- Poorghasemi , K. , Ommi , F. , Yaghmaei , H. , and Namaki ,. A. An investigation on effect of high pressure post injection on soot and NO emissions in a DI diesel engine Journal of Mechanical Science and Technology 26 1 2012 269 281
- Lilly LRC Diesel engine reference book London Butterworths 1984
- Taylor CF The internal combustion engine in theory and practice 2 Cambridge, MA MIT Press 1985
- Li W , Gu F , Ball AD , Leung AYT , Philipps CE A study of the noise from diesel engines using the independent component analysis Mechanical Systems and Signal Processing 2001 15 1165 84
- Rakopoulos CD , Giakoumis EG Diesel engine transient operation London Springer 2009
- Dürnholz , M. , Endres , H. , and Frisse , P. Preinjection A Measure to Optimize the Emission Behavior of DI-Diesel Engine SAE Technical Paper 940674 1994 10.4271/940674
- Augustin , U. and Schwarz , V. Low-noise combustion with pilot injection Truck Technol. Int. 1991
- Alkidas , A. Relationships Between Smoke Measurements and Particulate Measurements SAE Technical Paper 840412 1984 10.4271/840412
- Greeves , G. and Wang , C. Origins of Diesel Particulate Mass Emission SAE Technical Paper 810260 1981 10.4271/810260
- Arregle . J , Bermu′dez . V , Serrano . J.R , Fuentes . E Procedure for engine transient cycle emissions testing in real time Experimental Thermal and Fluid Science 2006 30 485 496
- SAE International Information Report Diesel Engine Smoke Measurement SAE Standard J255a, Rev. Aug. 1978
- IS: 10399 Automotive vehicles -Noise Emitted by Stationary Vehicles- Method of Measurement” 1998
- Taguchi G , Chowdhury S and Taguchi S Robust Engineering Tata McGraw Hill 2009
- Phadke S M Quality Engineering Using Robust Design Pearson Education 2008