This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Incorporating Inflation Pressure into UniTire Model for Pure Cornering
Technical Paper
2016-01-8028
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper focuses on the modeling process of incorporating inflation pressure into the UniTire model for pure cornering. Via observing and manipulating the tire experimental data, the effects of inflation pressure on the tire cornering property are analyzed in detail, including the impacts on cornering stiffness, the peak friction coefficient, the curvature of transition region and the pneumatic trail. And the brief mechanism explanations are also given for some of these impacts. The results show that some effects of inflation pressure are similar to that of vertical load on the non-dimensional tire cornering property, and there are strong interactive effects between the two operating conditions. Therefore, in order to obtain concise expressions, the inflation pressure is incorporated into the UniTire tire model by analogy with the expressions for vertical load, and the interactive effects are also taken into account. Finally, the effectiveness of the improved model is validated by comparison with the experimental data.
Authors
Citation
Yang, C., Xu, N., and Guo, K., "Incorporating Inflation Pressure into UniTire Model for Pure Cornering," SAE Technical Paper 2016-01-8028, 2016, https://doi.org/10.4271/2016-01-8028.Also In
References
- Milliken William F. , Milliken Douglas L. Race car vehicle dynamics 1-56091-526-9
- Haney Paul The Racing & High-Performance Tire 0-9646414-2-9
- Kasprzak , E. , Lewis , K. , and Milliken , D. Tire Asymmetries and Pressure Variations in the Radt/Milliken Nondimensional Tire Model SAE Technical Paper 2006-01-1968 2006 10.4271/2006-01-1968
- Kasprzak , E. , Lewis , K. , and Milliken , D. Inflation Pressure Effects in the Nondimensional Tire Model SAE Technical Paper 2006-01-3607 2006 10.4271/2006-01-3607
- Kasprzak E.M. Extension of the nondimensional tire theory to general operating conditions Ph.D. thesis Buffalo the State University of New York 2006
- Schmeitz A.J.C. , Besselink I.J.M. , Besselink I.J.M. , Nijmeijer H Extending the Magic Formula and SWIFT tyre models for inflation pressure changes VDI Conference Hannover, Germany 2006
- Hoogh J. Implementing inflation pressure and velocity effects into the Magic Formula tyre model Ph.D. thesis Eindhoven Eindhoven University of Technology 2005
- Besselink I.J.M. , Schmeitz A.J.C. , Pacejka H.B. An improved Magic Formula/Swift tyre model that can handle inflation pressure changes Veh Syst Dyn: International Journal of Vehicle Mechanics and Mobility 2010 48 S1 337 352
- Guo , K. and Ren , L. A Unified Semi-Empirical Tire Model with HigherAccuracy and Less Parameters SAE Technical Paper 1999-01-0785 1999 10.4271/1999-01-0785
- Guo , K.H. , Zhuang , Y. , Lu , D. et al. A study on speed-dependent tyre-road friction and its effect on the force and the moment Vehicle Syst Dyn 43 sup1 2005 10.1080/00423110500140815
- Kasprzak , E. and Gentz , D. The Formula SAE Tire Test Consortium-Tire Testing and Data Handling SAE Technical Paper 2006-01-3606 2006 10.4271/2006-01-3606
- Tao , F. Tire Blow-Out Transient Behavior and Its Effect on Vehicle Response Master thesis Jilin University 2012
- Lu , X.P. , Guo , K.H. , and Lu , D. et al. Effect of tire camber on vehicle dynamic simulation for extreme cornering Vehicle Syst Dyn 44 sup1 2006 10.1080/00423110600867309
- Xu. N Study on the Steady State Tire Model under Combined Conditions Ph.D. thesis Jilin University 2012
- Pacejka , H.B. Tyre and Vehicle Dynamics, 2nd Oxford Butterworth-Heinemann 2006 0-7506-6918-7