This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Multiple Injection Strategy Investigation for Well-Mixed Operation in an Optical Wall-Guided Spark-Ignition Direct-Injection (WG-SIDI) Engine through Flame Shape Analysis
Technical Paper
2016-01-2162
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
One major drawback of spark-ignition direct-injection (SIDI) engines is increased particulate matter (PM) and unburned hydrocarbon emissions at high load, due to wall wetting and a reduction in available air/fuel mixing time when compared to port-fuel injection (PFI). It is therefore necessary to understand the mechanics behind injection strategies which are capable of reducing these emissions while also maintaining the performance and efficiency of the engine. This study investigates the effect of varying the number fuel injection events and equivalence ratio on the operation of a wall-guided SIDI (WG-SIDI) engine. Of particular interest is how increased mixture homogeneity achieved by the double injection events impacts in-cylinder conditions and flame development. Performance parameters derived from in-cylinder pressure data are analysed alongside high speed natural flame chemiluminescence images in order to obtain relationships between engine output and the physical properties associated with air/fuel mixing and flame propagation. Compared to the single injection event, the results show that the double injection strategy leads to significantly higher net indicated mean effective pressure (IMEPn) and total heat release for the same fuel mass, which is consistent with the increased flame propagation speed. The mechanisms behind this trend are then further explored through the analysis of flame shape parameters such as flame boundary eccentricity, orientation and apparent flame boundary deviation (i.e. a wrinkling level) of the line-of-sight integrated image. It is found that single injection strategies tend to result in stretched flame fronts with a high elliptical eccentricity, regardless of equivalence ratio. The orientation of the semi-major axis of this elliptical flame is perpendicular to the injection momentum axis and is aligned closely with the tumble flow axis, indicating that fuel inhomogeneity occurring along the path of the fuel jet is a significant factor for flame distortion. Compared to the single injection strategy, the flame eccentricity is consistently lower for the double injection events, likely due to increased mixture homogeneity. Changes in the deviation in flame boundaries are found to be due to the global eccentric nature of the flame, rather than increased localised wrinkling of the apparent flame front; and, the difference in apparent flame boundary wrinkling across both injection strategies is either non-existent or too negligible to be resolved by the method used in this study, suggesting the wrinkling is not significantly impacted by localised regions of lean or rich mixture but is due entirely to turbulence intensity and length scale.
Recommended Content
Authors
Topic
Citation
Clark, L., Kook, S., Chan, Q., and Hawkes, E., "Multiple Injection Strategy Investigation for Well-Mixed Operation in an Optical Wall-Guided Spark-Ignition Direct-Injection (WG-SIDI) Engine through Flame Shape Analysis," SAE Technical Paper 2016-01-2162, 2016, https://doi.org/10.4271/2016-01-2162.Also In
References
- Drake , M. , and Haworth , D. Advanced Gasoline Engine Development using Optical Diagnostics and Numerical Modeling Proceedings of the Combustion Institute 31 99 124 2007 10.1016/j.proci.2006.08.120
- Yang , J. and Anderson , R. Fuel Injection Strategies to Increase Full-Load Torque Output of a Direct-Injection SI Engine SAE Technical Paper 980495 1998 10.4271/980495
- Harada , J. , Tomita , T. , Mizuno , H. , Mashiki , Z. et al. Development of Direct Injection Gasoline Engine SAE Technical Paper 970540 1997 10.4271/970540
- Alkidas , A. and El Tahry , S. Contributors to the Fuel Economy Advantage of DISI Engines Over PFI Engines SAE Technical Paper 2003-01-3101 2003 10.4271/2003-01-3101
- Landenfeld , T. , Kufferath , A. , and Gerhardt , J. Gasoline Direct Injection - SULEV Emission Concept SAE Technical Paper 2004-01-0041 2004 10.4271/2004-01-0041
- Aleiferis , P. , Taylor , A. , Ishii , K. , and Urata , Y. The Nature of Early Flame Development in a Lean-Burn Stratified-Charge Spark-Ignition Engine Combustion and Flame 136 283 302 2004 10:1016/j.combustflame.2003.08.011
- Drake , M. , Fansler , D. , and Lippert , A. Stratified-Charge Combustion: Modeling and Imaging of a Spray-Guided Direct-Injection Spark-Ignition Engine Proceedings of the Combustion Institute 30 2683 2691 2005 10.1016/j.proci.2004.07.028
- Sjöberg , M. , Zeng , W. , and Reuss , D. Role of Engine Speed and In-Cylinder Flow Field for Stratified and Well-Mixed DISI Engine Combustion Using E70 SAE Int. J. Engines 7 2 642 655 2014 10.4271/2014-01-1241
- Iwamoto , Y. , Noma , K. , Nakayama , O. , Yamauchi , T. et al. Development of Gasoline Direct Injection Engine SAE Technical Paper 970541 1997 10.4271/970541
- Schmidt , L. , Seabrook , J. , Stokes , J. , Ahmad Zuhdi , M. et al. Multiple Injection Strategies for Improved Combustion Stability under Stratified Part Load Conditions in a Spray Guided Gasoline Direct Injection (SGDI) Engine SAE Technical Paper 2011-01-1228 2011 10.4271/2011-01-1228
- Han , Z. , Yi , J. , and Trigui , N. Stratified Mixture Formation and Piston Surface Wetting in a DISI Engine SAE Technical Paper 2002-01-2655 2002 10.4271/2002-01-2655
- Johansson , A. , Hemdal , S. , and Dahlander , P. Experimental Investigation of Soot in a Spray-Guided Single Cylinder GDI Engine Operating in a Stratified Mode SAE Technical Paper 2013-24-0052 2013 10.4271/2013-24-0052
- Drake , M. , Fansler , T. , Solomon , A. , and Szekely , G. Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine SAE Technical Paper 2003-01-0547 2003 10.4271/2003-01-0547
- Zhao , F. , Harrington , D. , and Lai , M. Automotive Gasoline Direct-Injection Engines SAE International Warrendale, PA 2002 978-0-7680-0882-1
- Kim , T. , Song , J. , and Park , S. Effects of Turbulence Enhancement on Combustion Process using a Double Injection Strategy in Direct-Injection Spark-Ignition (DISI) Gasoline Engines International Journal of Heat and Fluid Flow 56 124 136 2015 10.1016/j.ijheatfluidflow.2015.07.013
- Su , J. , Xu , M. , Yin , P. , Gao , Y. et al. Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine SAE Int. J. Engines 8 1 20 29 2015 10.4271/2014-01-2845
- Oh , H. , Bae , C. , Park , J. , and Jeon , J. Effect of the Multiple Injection on Stratified Combustion Characteristics in a Spray-Guided DISI Engine SAE Technical Paper 2011-24-0059 2011 10.4271/2011-24-0059
- Serras-Pereira , J. , Aleiferis , P. , Richardson , D. , and Wallace , S. Spray Development, Flow Interactions and Wall Impingement in a Direct-Injection Spark-Ignition Engine SAE Technical Paper 2007-01-2712 2007 10.4271/2007-01-2712
- Luijten , B. , Adomeit , P. , Brunn , A. , and Somers , B. Experimental Investigation of In-Cylinder Wall Wetting in GDI Engines Using a Shadowgraphy Method SAE Technical Paper 2013-01-1604 2013 10.4271/2013-01-1604
- Withrow , L. , and Rassweiler , G. Studying Engine Combustion by Physical Methods Journal of Applied Physics 9 6 363 372 1938 10.1063/1.1710431
- Rothrock , A. , and Spencer , R. The Influence of Directed Air Flow on Combustion in a Spark-Ignition Engine NACA , Report No. 657 1939
- Beretta , G. , Rashidi , M. , and Keck , J. Turbulent Flame Propagation and Combustion in Spark Ignition Engines Combustion and Flame 52 217 245 1983
- Namazian , M. , Hansen , S. , Lyford-Pike , E. , Sanchez-Barsse , J. et al. Schlieren Visualization of the Flow and Density Fields in the Cylinder of a Spark-Ignition Engine SAE Technical Paper 800044 1980 10.4271/800044
- Herweg , R. , Begleris , P. , Zettlitz , A. , and Ziegler , G. Flow Field Effects on Flame Kernel Formation in a Spark-Ignition Engine SAE Technical Paper 881639 1988 10.4271/881639
- Peterson , B. , Reuss , D. , and Sick , V. High-Speed Imaging Analysis of Misfires in a Spray-Guided Direct Injection Engine Proceedings of the Combustion Institute 33 3089 3096 2011 10.1016/j.proci.2010.07.079
- Sjöberg , M. and Reuss , D. NOx-Reduction by Injection-Timing Retard in a Stratified-Charge DISI Engine using Gasoline and E85 SAE Int. J. Fuels Lubr. 5 3 1096 1113 2012 10.4271/2012-01-1643
- Gillespie , L. , Lawes , M. , Sheppard , C. , and Woolley , R. Aspects of Laminar and Turbulent Burning Velocity Relevant to SI Engines SAE Technical Paper 2000-01-0192 2000 10.4271/2000-01-0192
- Serras-Pereira , J. , Aleiferis , P. , Richardson , D. , and Wallace , S. Mixture Preparation and Combustion Variability in a Spray-Guided DISI Engine SAE Technical Paper 2007-01-4033 2007 10.4271/2007-01-4033
- Chan Q.N. , Bao Y. , and Kook S. Effects of injection pressure on the structural transformation of flash-boiling sprays of gasoline and ethanol in a spark-ignition direct-injection (SIDI) engine FUEL 130 228 240 2014
- Bao , Y. , Chan , Q. , Kook , S. , and Hawkes , E. Spray Penetrations of Ethanol, Gasoline and Iso-Octane in an Optically Accessible Spark-Ignition Direct-Injection Engine SAE Int. J. Fuels Lubr. 7 3 1010 1026 2014 10.4271/2014-01-9079
- Han , Z. , Reitz , R. , Yang , J. , and Anderson , R. Effects of Injection Timing on Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine SAE Technical Paper 970625 1997 10.4271/970625
- Iyer , C. and Yi , J. 3D CFD Upfront Optimization of the In-Cylinder Flow of the 3.5L V6 EcoBoost Engine SAE Technical Paper 2009-01-1492 2009 10.4271/2009-01-1492
- Hara , H. , Komoriya , H. , Ikebe , H. , and Iwamiya , Y. Lean-Burn Fuel Development Using the Correlation of CVCC and Engine Test SAE Technical Paper 961158 1996 10.4271/961158
- Rimmer , J. , Long , E. , Garner , C. , Hargrave , G. et al. The Influence of Single and Multiple Injection Strategies on In-Cylinder Flow and Combustion within a DISI Engine SAE Technical Paper 2009-01-0660 2009 10.4271/2009-01-0660