This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Brake Judder Analysis Based on the Rigid-Flexible Coupling Model of Brake Corner
Technical Paper
2016-01-1933
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Brake judder severely affects the riding comfort and safety of vehicle. For the brake corner system, a rigid-flexible coupling model is established based on ADAMS. In the model, brake pads, caliper, anchor and knuckle are flexible bodies, and the contacts between pads and disc and the contacts between pads and caliper are defined in detail. Meanwhile, the vibration acceleration of the brake corner components and the contact forces between disc and pads are used as evaluation index and the evaluation system of brake judder are improved. The analysis results show that the novel model and evaluation system can be used to predict brake judder effectively.
Authors
Topic
Citation
Li, M., Meng, D., and Zhang, L., "Brake Judder Analysis Based on the Rigid-Flexible Coupling Model of Brake Corner," SAE Technical Paper 2016-01-1933, 2016, https://doi.org/10.4271/2016-01-1933.Also In
References
- de Vries , A. and Wagner , M. The Brake Judder Phenomenon SAE Technical Paper 920554 1992 10.4271/920554
- Ioannidis P , Brooks P C , Barton D C et al. BRAKE SYSTEM NOISE AND VIBRATION-A REVIEW[C]//BRAKING 2002 FROM THE DRIVER TO THE ROAD. PAPERS FROM THE INTERNATIONAL CONFERENCE 2002
- Yu Z.P. , Yin D.X. , Zhang L.J. et al. A Review on Disk Brake Judder[J] AUTOMOTIVE ENGINEERING 2005 27 3 372 376
- Jacobsson H. Aspects of disc brake judder[J]. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering 2003 217 6 419 430
- Haigh M J , Smales H , Abe M Vehicle judder under dynamic braking caused by disc thickness variation[C] PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. BRAKING OF ROAD VEHICLES. INTERNATIONAL CONFERENCE HELD23-24 MARCH 1993 AT BIRDCAGE WALK, LONDON (PAPER NUMBER C444/022/93) 1993
- Jacobsson , H. Analysis of Brake Judder by use of Amplitude Functions SAE Technical Paper 1999-01-1779 1999 10.4271/1999-01-1779
- Leslie , A. Mathematical Model of Brake Caliper to Determine Brake Torque Variation Associated with Disc Thickness Variation (DTV) Input SAE Technical Paper 2004-01-2777 2004 10.4271/2004-01-2777
- NING G.B. , ZHANG L.J. YIN D.X. et al. Modeling and Analysis of the Brake Torque Variation Induced by Disc Side Face Run-Out [J] JOURNAL OF TONGJI UNIVERSITY(NATURAL SCIENCE) 2006 34 8 1094 1097
- Li L. , Yin D.X. , Zhang L.J. An Analysis on the Mechanism of Disc Brake Judder [J] AUTOMOTIVE ENGINEERING 2006 28 4 361 365
- MENG D.J. , ZHANG L.J. , YU Z.P. Influence of initial SRO and DTV on brake judder based on disc brake model with multi-point contact [J] JOURNAL OF VIBRATION AND SHOCK 2010 29 007 43 49
- Gassmann , S. and Engel , H. Excitation and Transfer Mechanism of Brake Judder SAE Technical Paper 931880 1993 10.4271/931880
- Zhang K. Flexible Multi-body Simulation of Brake System[D] Wuhan University of Technology 2010
- Zhuo J.Z. Study on Vibration of Disc Brake Based on Virtual Prototype Technology[D] Zhejiang University of Technology 2007
- Han J.R. Research on the Analysis of Automobile Brake Judder[D] Nanjing University of Aeronautics and Astronautics 2008
- Sim K S , Lee J H , Park T W et al. Vibration path analysis and optimal design of the suspension for brake judder reduction[J] International Journal of Automotive Technology 2013 14 4 587 594
- Gao X.J. , Yu Z.P. , Zhang L.J. et al. Simulation and Analysis of Brake Judder Phenomenon by Using ADAMS [J] JOURNAL OF SYSTEM SIMULATION 2006 18 6 1668 1670
- Yamaguchi T. Analysis of vibration behavior of full vehicle during brake judder[J] Review of automotive engineering 2006 27 1 121 127