This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Theoretical and Experimental Study of Injection Parameters on Performance and Fuel Consumption for BSIV Emission
Technical Paper
2016-01-1728
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In meeting the stringent emission norms the injector selection plays a vital role. Selection of optimum injection parameters helps in achieving good spray targeting and efficient atomization of fuel to generate optimum mixing effect. The purpose of this experimental study is to investigate the effect of injection parameters on a heavy duty diesel engine performance and emission characteristics. The injection parameters such as hydraulic through flow, cone angle, number of holes & hole diameter are studied on 6-cylinder turbocharged common rail diesel engine (BS-IV). The influence of these parameters and their combinations along with the various injection strategies are analyzed using different parametric variations in order to see the combustion and performance trend of engine. The performance of the various hardware configurations are then evaluated and discussed based on the fuel consumption and exhaust emission values.
Recommended Content
Authors
Topic
Citation
Arora, P., Barman, J., arora, S., and Parashar, M., "Theoretical and Experimental Study of Injection Parameters on Performance and Fuel Consumption for BSIV Emission," SAE Technical Paper 2016-01-1728, 2016, https://doi.org/10.4271/2016-01-1728.Also In
References
- Kim , B. , Yoon , W. , Ryu , S. , and Ha , J. Effect of the Injector Nozzle Hole Diameter and Number on the Spray Characteristics and the Combustion Performance in Medium-Speed Diesel Marine Engines SAE Technical Paper 2005-01-3853 2005 10.4271/2005-01-3853
- Li , Z. , Kokkolaras , M. , Jung , D. , Papalambros , P. et al. An Optimization Study of Manufacturing Variation Effects on Diesel Injector Design with Emphasis on Emissions SAE Technical Paper 2004-01-1560 2004 10.4271/2004-01-1560
- Rajamani , V. , Schoenfeld , S. , and Dhongde , A. Parametric Analysis of Piston Bowl Geometry and Injection Nozzle Configuration using 3D CFD and DoE SAE Technical Paper 2012-01-0700 2012 10.4271/2012-01-0700
- Millo , F. , Pautasso , E. , Delneri , D. , and Troberg , M. A DoE Analysis on the Effects of Compression Ratio, Injection Timing, Injector Nozzle Hole Size and Number on Performance and Emissions in a Diesel Marine Engine SAE Technical Paper 2007-01-0670 2007 10.4271/2007-01-0670
- Mobasheri , R. and Peng , Z. A Computational Investigation into the Effects of Included Spray Angle on Heavy-Duty Diesel Engine Operating Parameters SAE Technical Paper 2012-01-1714 2012 10.4271/2012-01-1714
- Genzale , C. , Reitz , R. , and Wickman , D. A Computational Investigation into the Effects of Spray Targeting, Bowl Geometry and Swirl Ratio for Low-Temperature Combustion in a Heavy-Duty Diesel Engine SAE Technical Paper 2007-01-0119 2007 10.4271/2007-01-0119
- Siewert , R. Spray Angle and Rail Pressure Study for Low NOx Diesel Combustion SAE Technical Paper 2007-01-0122 2007 10.4271/2007-01-0122
- Opat , R. , Ra , Y. , Gonzalez D., M. , Krieger , R. et al. Investigation of Mixing and Temperature Effects on HC/ CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine SAE Technical Paper 2007-01-0193 2007 10.4271/2007-01-0193
- Mobasheri , R. and Peng , Z. A Computational Investigation into the Effects of Included Spray Angle on Heavy-Duty Diesel Engine Operating Parameters SAE Technical Paper 2012-01-1714 2012 10.4271/2012-01-1714
- Kuhnert , S. , Wagner , U. , Spicher , U. , Haas , S. et al. Influence of Injection Nozzle Hole Diameter on Highly Premixed and Low Temperature Diesel Combustion and Full Load Behavior SAE Technical Paper 2010-01-2109 2010 10.4271/2010-01-2109
- Allocca , L. , Vaglieco , B. , Montanaro , A. , Mancaruso , E. et al. Investigation of Diesel Injector Nozzle Flow Number Impact on Spray Formation and Combustion Evolution by Optical Diagnostics SAE Technical Paper 2012-01-0701 2012 10.4271/2012-01-0701
- Bergstrand , P. and Denbratt , I. Diesel Combustion with Reduced Nozzle Orifice Diameter SAE Technical Paper 2001-01-2010 2001 10.4271/2001-01-2010
- Rosli , Abu Bakar and Semin , Abdul Rahim Ismail Fuel injection pressure effect on performance of direct injection diesel engines based on experiment American Journal of Applied Sciences 5 2008 197 202
- de Risi , A. , Donateo , T. , and Laforgia , D. Optimization of the Combustion Chamber of Direct Injection Diesel Engines SAE Technical Paper 2003-01-1064 2003 10.4271/2003-01-1064
- Heywood , J.B. 1988 Internal Combustion Engine Fundamentals - Second Edition McGraw-Hill