This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Aerodynamic Drag Reduction of a Light Truck - from Conceptual Design to Full Scale Road Tests
Technical Paper
2016-01-1594
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Considerable amounts of the everyday goods transports are done using light trucks. In the last ten years (2005-2015), the number of light trucks has increased by 33 % in Sweden. The majority of these light trucks are fitted with a swap body and encounter the same problem as many other truck configurations, namely that several different manufacturers contribute to the final shape of the vehicle. Due to this, the aerodynamics of the final vehicle is often not fully considered. Hence there appears to be room for improving the aerodynamic performance. In this study the flow around a swap body fitted to a light truck has been investigated using Computational Fluid Dynamics. The focus has been on improving the shape of the swap body in order to reduce both the aerodynamic drag and fuel consumption, while still keeping it usable for daily operations. Reynolds-Averaged Navier-Stokes simulations were used for concept evaluation while more advanced Detached Eddy Simulations were performed on the best concept in order to investigate details of the flow. Various concepts were evaluated from which it could be seen that a more streamlined top of the swap body together with a lowered top trailing edge had a significant positive effect on the aerodynamic drag. A full scale light truck was equipped with a swap body with with these modifications for road tests. During a test period, a mean fuel consumption reduction of 12 % was measured, thus indicating a significantly reduced aerodynamic drag.
Recommended Content
Authors
Citation
Ekman, P., Gardhagen, R., Virdung, T., and Karlsson, M., "Aerodynamic Drag Reduction of a Light Truck - from Conceptual Design to Full Scale Road Tests," SAE Technical Paper 2016-01-1594, 2016, https://doi.org/10.4271/2016-01-1594.Also In
References
- Izzo , M. and Myhr , A. Lastbilars klimateffektivitet och utsläpp - Rapprt 2015:12 Trafikanalys 2015
- Hucho , W.-H. Aerodynamics of Road Vehicles-Fourth Edition Warrendale Society of Automotive Engineers, Inc. 1998 978-0-7680-0029-0
- Sovran , G. , Morel , T. and Mason , T. Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles Plenum Press New York 1978 978-1-4684-8436-6
- Hucho , W.-H. and Emmelmann , H.-J Aerodynamische Formoptimierung, ein Weg zur Steigrung der Wirtschaftlichkeit von Nutzfahrzeugen VDI/ATG- Jahrestagung Fahrzeugtechnik Stuttgart 1977
- Ekman , P. , Gårdhagen , R. , Virdung , T. , and Karlsson , M. Aerodynamic Drag Reduction - from Conceptual Design on a Simplified Generic Model to Full-Scale Road Tests SAE Technical Paper 2015-01-1543 2015 10.4271/2015-01-1543
- Karlsson , M. , Gårdhagen , R. , Ekman , P. , Söderblom , D. et al. Aerodynamics of Timber Trucks - a Wind Tunnel Investigation SAE Technical Paper 2015-01-1562 2015 10.4271/2015-01-1562
- SAE International Surface Vehicle Recommended Practice Guidelines for Aerodynamic Assessment of Medium and Heavy Commercial Ground Vehicles Using Computational Fluid Dynamics SAE Standard J2966 Sept. 2013
- Krastev , V. and Bella , G. On the Steady and Unsteady Turbulence Modeling in Ground Vehicle Aerodynamic Design and Optimization SAE Technical Paper 2011-24-0163 2011 10.4271/2011-24-0163
- Anbarci , K. , Acikgoz , B. , Aslan , R. , Arslan , O. et al. Development of an Aerodynamic Analysis Methodology for Tractor-Trailer Class Heavy Commercial Vehicles SAE Int. J. Commer. Veh. 6 2 441 452 2013 10.4271/2013-01-2413
- Taherkhani , A. R. , deBoer , G. N. , Gaskell ., P. H. et al Aerodynamic Drag Reduction of Emergency Response Vehicles Advances in Automobile Engineering 4 2015
- Wood , R. Reynolds Number Impact on Commercial Vehicle Aerodynamics and Performance SAE Int. J. Commer. Veh. 8 2 590 667 2015 10.4271/2015-01-2859
- Storms , B. , Satran , D. , Heineck , J. and Walker , S. A Study of Reynolds Number Effects and Drag-Reduction Concepts on a Generic Tractor-Trailer AIAA 2004-2251 2004
- McArthur , D. , Burton , D. , Thompson , M. , and Sheridan , J. Development of a Wind Tunnel Test Section for Evaluation of Heavy Vehicle Aerodynamic Drag at a scale of 1:3 SAE Int. J. Commer. Veh. 6 2 522 528 2013 10.4271/2013-01-2455
- Cooper , K. The Effect of Front-Edge Rounding and Rear-Edge Shaping on the Aerodynamic Drag of Bluff Vehicles in Ground Proximity SAE Technical Paper 850288 1985 10.4271/850288
- Cooper , K. Truck Aerodynamics Reborn - Lessons from the Past SAE Technical Paper 2003-01-3376 2003 10.4271/2003-01-3376
- Cooper , K. and Leuschen , J. Model and Full-Scale Wind Tunnel Tests of Second-Generation Aerodynamic Fuel Saving Devices for Tractor-Trailers SAE Technical Paper 2005-01-3512 2005 10.4271/2005-01-3512
- Pavlovic , S. , Andersson , M. , Lantz , J. and Karlsson , M. Reduced Aerodynamic Drag for Truck-Trailer Configurations Using Parametrized CFD Studies IMECE 2012 9780791845233
- Malviya ., V. , Mishra , R. , Fieldhouse ., J. CFD Investigation of a Novel Fuel-Saving Devices for Articulated Tractor-Trailer Combinations Engineering Applications of Computational Fluid Mechanics 3 2009
- Watkins , S. , Saunders , J. , and Hoffman , P. Wind-Tunnel Modelling off Commercial Vehicle Drag-Reducing Devices: Three Case Studies SAE Technical Paper 870717 1987 10.4271/870717
- Ekman , P. Aerodynamic Drag Reduction Study of a Light Truck by use of CFD and Road Tests Proceedings of Svenska Mekanikdagar 2015 Linkoping University June 2015