This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study on Robust Air Induction Snorkel Volume Velocity Prediction Using DFSS Approach
Technical Paper
2016-01-0480
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The noise radiated from the snorkel of an air induction system (AIS) can be a major noise source to the vehicle interior noise. This noise source is typically quantified as the snorkel volume velocity which is directly related to vehicle interior noise through the vehicle noise transfer function. It is important to predict the snorkel volume velocity robustly at the early design stage for the AIS development.
Design For Six Sigma (DFSS) is an engineering approach that supports the new product development process. The IDDOV (Identify-Define-Develop-Optimize-Verify) method is a DFSS approach which can be used for creating innovative, low cost and trouble free products on significant short schedules. In this paper, an IDD project which is one type of DFSS project using IDDOV method is presented on developing a robust simulation process to predict the AIS snorkel volume velocity. First, the IDDOV method is overviewed and the innovative tools in each phase of IDDOV are introduced. Then, the major work of three phases of the IDD project is presented. Particularly, in the “Identify” phase, the importance of accounting the vehicle noise transfer function effect on snorkel airborne source noise is described. In the “Develop” phase, the different methods to quantify the snorkel volume velocity are compared. Finally, the robust and improved simulation process is recommended and some conclusions are drawn based on this study.
Recommended Content
Authors
Citation
Zhang, W., Likich, M., Lynch, M., and White, J., "A Study on Robust Air Induction Snorkel Volume Velocity Prediction Using DFSS Approach," SAE Technical Paper 2016-01-0480, 2016, https://doi.org/10.4271/2016-01-0480.Also In
References
- Tousignant , T. , Govindswamy , K. , and Leibling , C. Evaluation of Source and Path Contributions to Sound Quality Using Vehicle Interior Noise Simulation SAE Technical Paper 2011-01-1685 2011 10.4271/2011-01-1685
- Biermayer , W. and Brandl , F. Vehicle Sound Engineering by Modifying Intake / Exhaust Orifice Noise Using Simulation Software SAE Technical Paper 2003-01-1686 2003 10.4271/2003-01-1686
- Zhang , W. , Lynch , M. , Van Gils , A. and Balachandran , K. A Comparative Study of the Acoustic Behavior of Porous Duct Using Simulation and Testing Proceedings of Noise-Con 2014 September 8-10 Fort Lauderdale, Florida 2014
- Vansant , K. , Hallez , R. , Beriot , H. , Tournour , M. , Massa , G. , Donders , S. and Auweraer , H.V. Simulating Acoustic Engine Performance Over a Broad Frequency Range Proceedings of 2011 Symposium on International Automotive Technology, January 19-21 2011 India Paper 2011-26-0019 2011
- Khurana , R. and Zhang , W. A Case Study on Development of a Porous Ducted Air Induction System Solution for a new Chrysler vehicle Proceedings of Noise-Con 2013 August 26-28 Denver, Colorado 2013
- Zhang , W. , Lynch , M. , Van Gils , A. and Balachandran , K. A Study on Noise Transmissibility Prediction of Rubber Bellows in Air Induction Systems Proceedings of InterNoise2015 August 9-12 San Francisco, California 2015
- Wu , Y. and Wu , A. Taguchi Methods for Robust Design ISBN 0-7918-0157-8 2000
- Taguchi , G. , Chowdhury , S. and Wu , Y. Taguchi’s Quality Engineering Handbook ISBN 0-471-41334-8 2005
- Deng , M. , Li. , D. , Szpunar W. , and King , J. Reduction of Chatter in a Wiper System American Supplier Institute Symposium Dearborn, MI U.S.A. 1996
- Mahajan , S. , Surella , M. , and Single , T. Designing Six Sigma Quality into a RWD IRS Driveline System for Improved Vehicle-Level NVH Performance SAE Technical Paper 2003-01-1494 2003 10.4271/2003-01-1494
- Wei W. and Falzetta F. Applying DFSS Method in NVH Measurement to Optimize Vehicle Noise Treatment Paper No. 1109 Proceeding of Inter-Noise 2012, August 19-22 New York City 2012
- Zhang , W. , Khurana , R. , Likich , M. , and Lynch , M. Optimization of a Porous Ducted Air Induction System Using Taguchi's Parameter Design Method SAE Int. J. Passeng. Cars - Mech. Syst. 7 2 816 821 2014 10.4271/2014-01-0887
- ASI Consulting Group, LLC Design For Six Sigma, Chrysler Group Project Leader Training 2005
- Chowdhury , S. Design For Six Sigma ISBN 1-4195-2681-2 2002