This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Automotive LED Headlamp Defogging: Experimental and Numerical Investigation
Technical Paper
2016-01-0216
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Fogging (i.e. condensation of water vapor) in headlamps in severe weather conditions present both a performance and potential safety concern for automotive companies. Conventional headlamps are based on incandescent bulbs. In recent times, LED lighting has increasingly become the norm. However, LED based headlamps are prone to higher levels of fogging because they inherently produce less heat than the conventional incandescent or halogen bulbs. A headlamp design must be able to dispose all the formed condensate/fog in a fixed time even under severe thermal conditions. It is of great importance for the car manufacturer to be able to simulate the risk of condensation early in the design stage with an eye on the overall cost reduction. The combined use of experimental studies and numerical modelling is important to optimize headlamp design and to produce high-performance headlamps. Most of the available literature on headlamp defogging simulation is based, primarily, on 2D geometries with simplified physics. However, in reality, the flow and thermal field inside of a headlamp assembly is highly complicated, encompassing conduction, convection, radiation, phase change and varying ambient conditions.
This paper presents an overview of experimental and numerical investigations of the defogging process in an automotive headlamp. In this study, the Eulerian Wall Film (EWF) approach is implemented on a three-dimensional geometry to capture the underlying physics governing the defogging phenomenon inside the headlamp. Lab test observations indicate that the numerical predictions closely agree with the experimental data. Moreover, this study includes simulations on headlamp defogging characterization for different kinds of lens materials. Lenses made of glass and polycarbonate are considered in the analysis to quantify the impact of these materials on defogging performance, thus, enabling the selection of an appropriate lens material in terms of cost and performance with reduced developmental cycle time. The validated numerical prediction method can be used to study the risk of condensation and the required defogging early in the design stage.
Recommended Content
Authors
Citation
Singh, R., Kuzhikkali, R., Shet, N., Natarajan, S. et al., "Automotive LED Headlamp Defogging: Experimental and Numerical Investigation," SAE Technical Paper 2016-01-0216, 2016, https://doi.org/10.4271/2016-01-0216.Also In
References
- Driving Vision News - Global Study (2013); and data from key auto lighting tiers
- Jue , T.C. 2003 Analysis of thermal convection in a fluid-saturated porous cavity with internal heat generation Heat and Mass Transfer 40 1-2 83 89
- Barozzi , G.S. , Corticelli , M.A. 2000 Natural convection in cavities containing internal sources Heat and Mass Transfer 36 6 473 480
- Sun , Y.S. , Emery , A.F. 1997 Effects of wall conduction, internal heat sources and an internal baffle on natural convection heat transfer in a rectangular enclosure International Journal of Heat and Mass Transfer 40 4 915 929
- Croce G. , D’Agaro P. and Mattiello F. , De Angelis A. 2004 A numerical procedure for defogging process simulation in automotive industry International Conference on Heat and Mass Transfer Corfu, Greece August 17 19
- Croce G. , D’Agaro P. , De Angelis A. and Mattiello F. 2007 Numerical simulation of windshield defogging process Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 221 1241 1249
- D’Agaro P. , Croce G. and Cortella G. 2006 Numerical simulation of glass doors fogging and defogging in refrigerated display cabinets Applied Thermal Engineering 26 1927 1934
- Moore , W. and Powers , C. Temperature Predictions for Automotive Headlamps Using a Coupled Specular Radiation and Natural Convection Model SAE Technical Paper 1999-01-0698 1999 10.4271/1999-01-0698
- Preihs , E. 2006 Analytic Solution and Measurements of Condensation inside a Headlamp COMSOL Conference 2006
- Chenevier , C. 2001 Thermal simulation in lighting systems-5 days/5 degrees Proceedings of the Fourth International Symposium Progress in Automotive Lighting Darmstadt, Germany 109 118
- Wulf , J. and Reich , A. Temperature Loads in Headlamps SAE Technical Paper 2002-01-0912 2002 10.4271/2002-01-0912
- Halgren , C. and Hilburger , F. Development and Correlation of Internal Heat Test Simulation Using CFD SAE Technical Paper 2003-01-0647 2003 10.4271/2003-01-0647
- Croce G. , D’Agaro P. , De Angelis A. and Mattiello F. 2007 Numerical simulation of windshield defogging process Proceedings of the Institution of Mechanical
- Versteeg H K , Malalasekera W An introduction to Computational Fluid Dynamics - The finite Volume method second 2007
- ANSYS TM FLUENT TM 12, Theory Guide