This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Electrochemical Noise Behavior of YSZ Coatings Applied by Magnetron Sputtering on Aircraft Alloys
Technical Paper
2015-01-2605
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Thin films deposited by magnetron sputtering are review in terms of their potential and present uses in the aircraft industry. The aircraft alloys substrates were Ti-6Al-4V and Incoloy 800HT, using a target of yttrium stabilized zirconia (YSZ) with nominal composition of 8% Y2O3 (wt%) and the remainder of ZrO2. The chemical composition of the films was determined by X-ray energy dispersion (EDS). The electrochemical noise behavior show that the coatings decreased propagation of pitting, leading to a state of passivation or uniform corrosion, and also possess superior corrosion resistance over the individually substrates.
Authors
- Jamnie Yazmín Achem Calahorra - Universidad Autónoma de Nuevo León
- Hilda E. Esparza Ponce - Centro de Investigación en Materiales Av
- Patricia Zambrano Robledo - Universidad Autónoma de Nuevo León
- Facundo Almeraya Calderón - Universidad Autónoma de Nuevo León
- Citlalli Gaona Tiburcio - Universidad Autónoma de Nuevo León
Topic
Citation
Achem Calahorra, J., Esparza Ponce, H., Zambrano Robledo, P., Almeraya Calderón, F. et al., "Electrochemical Noise Behavior of YSZ Coatings Applied by Magnetron Sputtering on Aircraft Alloys," SAE Technical Paper 2015-01-2605, 2015, https://doi.org/10.4271/2015-01-2605.Also In
References
- National Aeronautics and Space Administration (NASA) Sputtering and Ion Plating for Aerospace Application National Conference of the American Electroplaters Society June 1981
- Baragetti S. , Gerosa R. , Rivolta B. , Silva G. , and Tordini F. Fatigue behavior of foreign object damaged 7075 heat treated aluminum alloy coated with PVD WC/C Procedia Engineering 10 2011 3375 3380 10.1016/j.proeng.2011.04.556
- Hetmanczyk M. , Swadzba L. and Mendala B. Advance materials and protective coatings in aero-engines application Journal of Achievements in Material and Manufacturing Engineering 24 1
- Carter T.J. Common failures in gas turbine blades Engineering Failure Analysis 12 2005 237 247 10.1016/j.engfailanal.2004.07.004
- Reedy M.W. , Eden T.J. , Potter J.K. and Wolfe D.E. Erosion performance and characterization of nanolayer (Ti,Cr)N hard coatings for gas turbine engine compressor blade applications Surface & Coatings Technology 206 2011 464 472 10.1016/j.surfcoat.2011.07.063
- Costa M.Y.P. , Venditti M.L.R. , Cioffi M.O.H. , Voorwald H.J.C. , Guimarães V.A. and Ruas R. Fatigue behavior of PVD coated Ti-6Al-4V alloy International Journal of Fatigue 33 2011 759 765 10.1016/j.ijfatigue.2010.11.007
- Costa M.Y.P. , Cioffi M.O.H. , Venditti M.L.R. , Cornelis H.J. and Voorwald H.J.C. Fatigue fracture behavior of Ti-6Al-4V PVD coated Procedia Engineering 2 2010 1859 1864 10.1016/j.proeng.2010.03.200
- García D. , Piratoba U. and Mariño A. Recubrimientos de (Ti,Al)N Sobre Acero AISI 4140 por Sputtering Reactivo DYNA 74 152 Universidad Nacional de Colombia Medellín, Colombia 181 185 0012-7353
- Boulle A. , Oudjedi Z. , Guinebretière R. , Soulestin B. and Dauger A Ceramic nanocomposites obtained by sol-gel coating of submicron powders Acta Materialia 49 2001 811 816 10.1016/S1359-6454(00)00366-9
- Suffredini H.B. , Tricoli V. , Avaca L.A. and Vatistas N Sol-gel method to prepare active Pt-RuO2 coatings on carbon powder for methanol oxidation Electrochemistry Communications 6 2004 1025 1028 10.1016/j.elecom.2004.08.008
- Suffredini H.B. , Tricoli V. , Vatistas N. and Avaca L.A. Electro-oxidation of methanol and ethanol using a Pt-RuO2/C composite prepared by the sol-gel technique and supported on boron-doped diamond Journal of Power Sources 158 2006 124 12 10.1016/j.jpowsour.2005.09.040
- Haraguchi M. , Komatsu F. , Tajiri K. , Okamoto T. , Fukui M. and Kato S Fabrication and optical characterization of a TiO2 thin film on a silica microsphere Surface Science 548 2004 59 66 10.1016/j.susc.2003.10.037
- Shukla S. , Seal S. , Rahaman Z. , and Scammon K Electroless copper coating of cenospheres using silver nitrate activator Materials Letters 57 2002 151 156 10.1016/S0167-577X(02)00722-X
- Hou S. , Zhu S. , Zhanga T. and Wang F A magnetron sputtered microcrystalline-NiAl coating for SC superalloys. Part I. Characterization and comparison of isothermaloxidation behavior at 1100°C with a NiCrAlY coating Applied Surface Science 324 2015 1 12 10.1016/j.apsusc.2014.10.106
- Zhu C. , Javed A. , Li P. , Yang F. , Liang G.Y. and Xiao P A study of the microstructure and oxidation behavior of alumina/yttria-stabilized zirconia (Al2O 3 /YSZ) thermal barrier coatings Surface & Coatings Technology 212 2012 214 222 10.1016/j.surfcoat.2012.09.052
- Schmid G.H.S. and Eisenmenger-Sittner C. A method for uniformly coating powdery substrates by magnetron sputtering Surface & Coatings Technology 236 2013 353 360 10.1016/j.surfcoat.2013.10.012
- Rossi S. , Fedrizzi L. , Leoni M. , Scardi P. , Massian Y. (Ti,Cr)N and Ti/TiN PVD coatings on 304 stainless steel substrates: wear-corrosion behavior Thin Solid Films 350 1999 161 167 10.1016/S0040-6090(99)00235-7
- Esparza Ponce H. E. Proceso para la elaboración de blancos de circonia estabilizada con itria al 3 y 8%, para su uso en crecimiento de películas delgadas mediante erosión catódica Mexican Patent MX/a2010/005719 June 7 2010
- American Society for Testing and Materials Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements ASTM-G59-97 2014
- American Society for Testing and Materials Standard Guide for Electrochemical Noise Measurement ASTM-G1999-09 2014
- Prengel H.G , Jindal P.C , Wendt K.H. , Santhanam A.T. , Hegde P.L. , Penich R.M. A new class of high performance PVD coatings for carbide cutting tools Surface & Coatings Technology 139 2001 25 34 10.1016/S0257-8972(00)01080-X