This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design of Powertrain Mounting System for Engine with Three Cylinders
Technical Paper
2015-01-2354
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The inline 3-cylinder engine is taken as an object, the imbalance resultant rotating inertia moment and resultant reciprocating inertia moment generated by piston-crank mechanisms are analyzed. The balance theories of two different balance methods are presented and the additional moment generated through each method is derived. Three different balance conditions are proposed. The imbalance moments and mount reaction forces in each condition are calculated and compared. The powertrain mounting system design method is developed. The optimal mount stiffness not only satisfy the powertrain's natural frequencies and energy distributions but also meet the requirement for mount reaction forces in “50% balance condition”.
Recommended Content
Authors
Topic
Citation
Liu, X., Lv, Z., and Shangguan, W., "Design of Powertrain Mounting System for Engine with Three Cylinders," SAE Technical Paper 2015-01-2354, 2015, https://doi.org/10.4271/2015-01-2354.Also In
References
- Qatu , M.S. , Abdelhamid , M.K. , Pang , J. et al. Overview of Automotive Noise and Vibration International Journal of Vehicle Noise and Vibration 5 1 2 1 35 2009 10.1504/IJVNV.2009.029187
- Qatu , M.S. Recent Research on Vehicle Noise and Vibration International Journal of Vehicle Noise and Vibration 8 4 289 301 2012 10.1504/IJVNV.2012.051536
- Shangguan , W.-B. Engine mounts and powertrain mounting systems: a review International Journal of Vehicle Design 49 4 237 258 2009 10.1504/IJVD.2009.024956
- Xu , S. Vibration Isolation and Decoupling Technique of Engine-Mount on Vehicle Automotive Engineering 17 4 198 204 1995
- Shangguan , W.-B. , Hou , Z. Strategies and calculation methods for automotive powertrain motion control under quasi-static loads Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 220 8 1131 1138 2006 10.1243/09544070JAUTO188
- Suh , K. , Lee , Y. , and Yoon , H. A Study on the Balancing of the Three-Cylinder Engine with Balance Shaft SAE Technical Paper 2000-01-0601 2000 10.4271/2000-01-0601
- Karabulut , H. Dynamic model of a two-cylinder four-stroke internal combustion engine and vibration treatment International Journal of Engine Research 13 6 616 627 2012 10.1177/1468087412442618
- Kim , C. , Kang , Y.J. , Lee , B. et al. Determination of optimal position for both support bearing and unbalance mass of balance shaft Mechanism and Machine Theory 50 150 158 2012 10.1016/j.mechmachtheory.2011.11.006
- Akei , M. , Kouzato , K. , and Uyama , T. Study of Engine Mount Layout for Industrial Diesel SAE Technical Paper 2012-32-0108 2012 10.4271/2012-32-0108
- Ambardekar , M. , Logeshkumar , N. , Gangurde , P. , and Arora , G. Vibration Isolation of a Pick-up Vehicle with a 2-Cylinder Diesel Engine SAE Technical Paper 2007-26-035 2007 10.4271/2007-26-035