This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Highly Precise Injection-Rate Detector Applicable to Piezoelectric Injectors Having the Function of Ultra Multi-Stage Injection
Technical Paper
2015-01-2001
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In the past we developed an injection-rate detector, however, it becomes no more applicable to modern high-pressure piezoelectric injection systems having functions of multi-stage injection due to the following problems: High-pressure injection generates shockwaves that induce pressure fluctuation, whose amplitudes of high-frequency components could be not effectively attenuated with a low-pass filter, in the detector. High-pressure injection also causes heterogeneous distribution of temperature in the detector, because the pattern of fuel flow from the injection nozzle to the discharge valve at fuel-discharging process is inappropriate. Accordingly, fuel temperature, which is necessary for identifying bulk modulus of fuel, in the detector could not be precisely obtained, thereby causing an unacceptable level of scattering for determining injection quantity. Hence, we developed a new detector in modifying its constructive design to solve the problems. As a result, multi-stage injection-rate and injection quantity can be more precisely measured.
Recommended Content
Authors
Citation
Yamaguchi, T., Watabe, K., Kamako, T., Sano, M. et al., "Development of Highly Precise Injection-Rate Detector Applicable to Piezoelectric Injectors Having the Function of Ultra Multi-Stage Injection," SAE Technical Paper 2015-01-2001, 2015, https://doi.org/10.4271/2015-01-2001.Also In
References
- Heywood J. B. Internal Combustion Engine Fundamentals New York McGraw-Hill Book Co. 1988 0-07-028637-X
- Oki M. , Matsumoto S. , Toyoshima Y. , Ishisaka K. and Tsuzuki N. , 180 MPa Piezo Common Rail System SAE Technical Paper , 2006-01-0274 2006
- Matsumoto S. , Yamada K. and Date K. , Concepts and Evolution of Injector for Common Rail System SAE Technical Paper , 2012-01-1753 2012
- Win Z. , Gakkhar R. P. , Jain S. C. and Bhattacharya M. , Investigation of Diesel Engine Operating and Injection System Parameters for Low Noise, Emissions, and Fuel Consumption Using Taguchi Method Proceedings of Institution of Mechanical Engineers Part D - Journal of Automotive Engineering 219 10 2005 1237 1251
- Ghaffarpour M. R. and Noorpoor A. R. A Numerical Study of the Use of Pilot or Split Rate Injection To Reduce Diesel Engine Noise Proceedings of the Institution of Mechanical Engineers Part D - Journal of Automotive Engineering 221 4 2007 457 464
- Mendez , S. and Thirouard , B. Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines SAE Int. J. Fuels Lubr. 1 1 662 674 2009 10.4271/2008-01-1329
- Zeuch W. , Neue Verfahren zur Messung des Einspritzgesetztes und den Einspritz-Regelmäßigkeit von Diesel-Einspritzpumpen MTZ 22 9 1961 415 420
- Bosch W. , The Fuel Rate Indicator: A New Measuring Instrument for Display of the Characteristics of Individual Injection SAE Technical Paper , 660749 1966
- Takamura A. , Fukushima S. , Ohmori Y. and Kamimoto T. , Development of a New Measurement Tool for Fuel Injection Rate in Diesel Engines SAE Technical Paper , 890317 1989
- Takamura A. , Ohta T. , Fukushima S. and Kamimoto T. , A Study on Precise Measurement of Diesel Fuel Injection Rate SAE Technical Paper , 920630 1992
- Bower G. R. and Foster D. E. A Comparison of the Bosch and Zeuch Rate of Injection Meters SAE Technical Paper , 910724 1991
- Arcoumanis C. and Baniasad M. S. Analysis of Consecutive Fuel Injection Rate Signals Obtained by the Zeuch and Bosch Method SAE Technical Paper , 930921 1993
- Ishikawa S. , Ohmori Y. , Fukushima S. , Suzuki T. , Takamura A. and Kamimoto T. , Measurement of Rate of Multiple-Injection in CDI Diesel Engines SAE Technical Paper , 2000-01-1257 2000
- Ikeda T. , Ohmori Y. , Takamura A. , Sato Y. , Jun L. and Kamimoto T. , Measurement of the Rate of Multiple Injection with Diesel Fuel and DME SAE Technical Paper , 2001-01-0527 2001
- Postrioti L. , Buitoni G. , Pesce F. C. and Ciaravino C. , Zeuch Method-Based Injection Rate Analysis of a Common-Rail System Operated with Advanced Injection Strategies Fuel 128 2014 188 198
- Matsuoka S. , Yokota K. and Kamimoto T. , The Measurement of Injection Rate Proceedings of the Institution of Mechanical Engineers 184 10 1969 87 94