This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Analysis on Heat Loss of a Heavy-Duty Diesel Engine by Wall-Impinged Spray Flame Observation
Technical Paper
2015-01-1832
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Impingement of a spray flame on the periphery of the piston cavity strongly affects heat loss to the wall. The heat release rate history is also closely correlated with the indicated thermal efficiency. For further thermal efficiency improvement, it is thus necessary to understand such phenomena in state of the art diesel engines, by observation of the actual behavior of an impinging spray flame and measurement of the local temperature and flow velocity. A top-view optically accessible engine system, for which flame impingement to the cavity wall can be observed from the top (vertically), was equipped with a high speed digital camera for direct observation. Once the flame impinged on the wall, flame tip temperature decreased roughly 100K, compared to the temperature before impingement. With higher injection pressure, local flame speed, as determined by the PIV technique was almost the same as that determined by numerical simulation, whereas flame temperature near the wall analyzed by the two-color method showed a relatively smaller increase than the numerical results. The experiment was also carried out with zirconia coated combustion chamber, which resulted in a 100 K lower flame tip temperature drop than the baseline steel piston did, in the impingement region.
Recommended Content
Authors
Citation
Osada, H., Uchida, N., and Zama, Y., "An Analysis on Heat Loss of a Heavy-Duty Diesel Engine by Wall-Impinged Spray Flame Observation," SAE Technical Paper 2015-01-1832, 2015, https://doi.org/10.4271/2015-01-1832.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Splitter , D. , Hanson , R. , Kokjohn , S. , and Reitz , R. Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels SAE Technical Paper 2011-01-0363 2011 10.4271/2011-01-0363
- Furuno , S. Preceding of Advance ICE Seminar on The 22nd Internal Combustion Engine Symposium 2011 S-19 S-39
- Osada , H. , Uchida , N. , Shimada , K. , and Aoyagi , Y. Reexamination of Multiple Fuel Injections for Improving the Thermal Efficiency of a Heavy-Duty Diesel Engine SAE Technical Paper 2013-01-0909 2013 10.4271/2013-01-0909
- Ahn S G , Kamimoto T , Matsui Y , Matsuoka S Measurement of Flame Temperature distribution of Diesel Engine by using the Image Analysis of High-speed photos (in Japanese) Transaction of JSAE 47 417 1981 896 903
- Tate R Measurement of Flame Temperature in Spray Combustion Process by Image Processing (in Japanese) Journal of the ILASS-Japan 18 63 2009 103 110
- Hayashi K. , Sekiguchi F. , Kominami T. , Kawamura T. , Kowada M. The Advanced Technologies of the Heavy-duty Diesel Engine to meet Japan Post New Long-term Emission Regulations Journal of Society of Automotive Engineers of Japan 65 3 2011 32 36
- Fujino R , Aoyagi Y , Osada H , Yamaguchi T , Mizuno S Direct Observation of Clean Diesel Combustion using a Bore Scope in a Single Cylinder HDDE SAE Technical Paper 2009-01-0645 2009
- Kamo , R. , Assanis , D. , and Bryzik , W. Thin Thermal Barrier Coatings for Engines SAE Technical Paper 890143 1989 10.4271/890143
- Suziki , T. , Tsujita , M. , Mori , Y. , and Suzuki , T. An Observation of Combustion Phenomenon on Heat Insulated Turbo-Charged and Inter-Cooled D.I. Diesel Engines SAE Technical Paper 861187 1986 10.4271/861187
- Kuboyama T. , Kosaka H. , Aizawa T. A Study on Radiant Heat Transfer in Combustion Chamber of DI Diesel Engines Transactions of the JSME (in Japanese) 74 741 2008 199 206
- Kojima T. , Hagiwara T. , Nishiwaki K. Wall-Temperature Dependence of the Heat Transfer Coefficient in Exothermic Boundary Layers Transactions of the JSME (in Japanese) 58 553 1992 168 174
- Dec , J. and Tree , D. Diffusion-Flame / Wall Interactions in a Heavy-Duty DI Diesel Engine SAE Technical Paper 2001-01-1295 2001 10.4271/2001-01-1295
- Pickett , L. and López , J. Jet-Wall Interaction Effects on Diesel Combustion and Soot Formation SAE Technical Paper 2005-01-0921 2005 10.4271/2005-01-0921
- Zama , Y. , Ochiai , W. , Furuhata , T. and Arai , M. Study on Behavior of Diesel Spray Under High Ambient Density Condition ILASS-Asia 2011, 15th Annual Conference on Liquid Atomization and Spray Systems Pingtung, Taiwan October 19 21 2011
- Zama , Y. , Ochiai , W. , Furuhata , T. and Arai , M. Velocity Measurement Inside A Diesel Spray By Using Time-Resolved PIV Under High Ambient Density Condition ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems Heidelberg, Germany September 2 6 2012