This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Multi-objective Optimization of the PMS Based on Non-dominated Sorting Genetic Algorithm II
Technical Paper
2015-01-1675
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In order to reasonably match the variable stiffness and location of the Powertrain Mounting System (PMS) and optimize the ride comfort of commercial vehicle, a thirteen degrees of freedom (DOF) model of a commercial vehicle was established in Adams/view. Specially, the support rod installed on the upside of the transmission case was modeled as a flexible body.
The vibration isolation provided by the PMS was evaluated in three aspects: the energy decoupling of the powertrain, the response force of the mount and the displacement of the powertrain. The energy decoupling ratio, the force RMS of the mount when force excitation was applied on the powertrain and the displacement of the powertrain Center of Gravity (C.G) when displacement excitation was applied on the vehicle chassis were selected as the optimal target. Adams and MATLAB were integrated into the optimization software iSIGHT to optimize the PMS. NSGA-II is used to obtain some Pareto-optimal solutions of PMS. Finally, a “performance function” is introduced to get the result of optimization.
Authors
Topic
Citation
Chen, Y., Tang, Z., Xu, P., and Zhang, Y., "Multi-objective Optimization of the PMS Based on Non-dominated Sorting Genetic Algorithm II," SAE Technical Paper 2015-01-1675, 2015, https://doi.org/10.4271/2015-01-1675.Also In
References
- Karanth , N. , Raju , S. , Kumbhar , M. , and Vijayalakshmi , M. Design and Evaluation of Engine Mounts of a Passenger Utility Vehicle SAE Technical Paper 962493 1996 10.4271/962493
- Shangguan , W. , Zhao Y. Dynamic analysis and design calculation methods for powertrain mounting system International Journal of Automotive Technology 8 6 731 744 2007 1129-9138
- Bhivare , A. and Gokhale , N. Optimization of Design Parameters Related to the Engine Mounting Using A Computer Aided Model SAE Technical Paper 990027 1999 10.4271/990027
- Cho , S. Configuration and sizing design optimization of powertrain mounting systems Int. J. of Vehicle Design 24 1 34 47 http://inderscience.metapress.com/content/q0tnh12kepu6ccqt/
- Wang , S , Mohammad , E Displacement and force control of a quarter car using a mixed mode MR mount Shock and Vibration 20 1 17 2013 10.3233/SAV-2012-0721
- Brach , R. Automotive Powerplant Isolation Strategies SAE Technical Paper 971942 1997 10.4271/971942
- Courteille , E. New analytical method to evaluate the powerplant and chassis coupling in the improvement vehicle NVH European Journal of Mechanics A/Solids 24 929 943 2005 10.1016/j.euromechsol.2005.04.004
- Sirafi , M. and Qatu , M. Accurate Modeling for the Powertrain and Subframe Modes SAE Technical Paper 2003-01-1469 2003 10.4271/2003-01-1469
- Xu , P. , Bernardo , B. and Tan , K. Optimal mounting design for cab vibration isolation Int. J. Vehicle Design 57 2/3 292 304 2011 10.1504/IJVD.2011.044727
- Rakheja , S. , Cao , D. and Wang , Z. 2011 Urban bus driver ride and road-friendliness. Part I: Model development and role of operating parameters Int. J. Vehicle Design 57 4 305 332 10.1504/IJVD.2011.045769
- Pazooki , A , Cao , D. , Rakheja , S , Boileau , P. Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility 49 9 1455 1476 2011 10.1080/00423114.2010.516833
- Tang , Z. , Chen , Y. , Zeng , J. , Yang , Y. et al. Optimization Design of a Six-Point Powetrain Mounting System with Flexible Support Rod SAE Int. J. Commer. Veh. 7 1 262 270 2014 10.4271/2014-01-1682
- Srinivas , N , Deb , K Multi-objective Optimization Using Non-dominated Sorting in Genetic Algorithms Evolutionary Computation 1994 2 03 10.1162/evco.1994.2.3.221
- Gao , Y , Lu , J. A New Scheme of Function Approximation Based on SVM and NSGA II The International Conference on Sensing, Computing and Automation 2006 10.1109/ICNNB.2005.1614665