This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Aerodynamic Drag Reduction - from Conceptual Design on a Simplified Generic Model to Full-Scale Road Tests
Technical Paper
2015-01-1543
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Road transportation by trucks is the major part of the goods transportations system in the European Union (EU), and there is a need for increased fuel efficiency. While truck manufacturers already spend significant resources in order to reduce the emissions from their vehicles, most truck manufacturers do not control the shape of the trailer and/or swap bodies. These devices are usually manufactured by different companies that cannot consider the overall aerodynamics around the complete vehicle.
By use of Computational Fluid Dynamics (CFD) and previous wind tunnel experiments, the flow around a simplified generic tractor-trailer model has been investigated. With better understanding of the flow features around the tractor with attached trailer or swap bodies, an improved design of the trailer and swap body can be achieved, which is the aim for the project. Special emphasis is put on achieving simple, easy to install or implement drag-reducing geometrical modifications to the trailer or swap bodies that can be mounted on existing trucks.
Reynolds-Averaged Navier-Stokes (RANS) simulations were used for the conceptual development phase where trends in drag reduction due to the modified geometries were studied using a parameter study, while more advanced scale resolving simulations (SRS) were used in order to investigate the details of the flow fields.
The investigation indicates that aerodynamic drag reduction is possible with quite simple geometrical modifications. Some of the results have also been verified through road tests of vehicles in commercial use, which has shown reduced fuel consumption of up to 5%.
Recommended Content
Authors
Topic
Citation
Ekman, P., Gårdhagen, R., Virdung, T., and Karlsson, M., "Aerodynamic Drag Reduction - from Conceptual Design on a Simplified Generic Model to Full-Scale Road Tests," SAE Technical Paper 2015-01-1543, 2015, https://doi.org/10.4271/2015-01-1543.Also In
References
- Hucho , W. Aerodynamics of Road Vehicles Society of Automotive Engineers, Inc. Warrendale, Pa 1998 978-0-7680-0029-0
- Machado , Z. , VanWingerden , C. , Pappas , J. , McAlexander , B. , LeMaire , J. , Pierrakos , O. , Watson , H. Increasing Fuel Savings of Class-8 Tractor-Trailers by Reducing Aerodynamic Drag
- Allan , J.W. Aerodynamic Drag and Pressure Measurements on a Simplified Tractor-Trailer Model Journal of Wind Engineering and Industrial Aerodynamics 9 125 136 1981
- Östh , J. , Krajnovic , S. The Flow around a simplified tractor-trailer model studied by large eddy simulation Journal of Wind Engineering and Industrial Aerodynamics 2011
- Larose ., G.L. , D'Auteuil ., A. On the Reynolds number sensitivity of the aerodynamics of bluff bodies with sharp edges Journal of Wind Engineering and Industrial Aerodynamics 2006
- Sohankar ., A. Flow over bluff body from moderate to high Reynolds numbers using large eddy simulation Computers &Fluids 35 2006
- Cooper , K. The Effect of Front-Edge Rounding and Rear-Edge Shaping on the Aerodynamic Drag of Bluff Vehicles in Ground Proximity SAE Technical Paper 850288 1985 10.4271/850288
- Anderson , J.D. Fundamentals of Aerodynamics 4 th McGraw-Hill 007-125408-0
- Daud , H.A. , Li , Q. , Bég , O.A. , AbdulGhani , S.A.A. Numerical investigations of wall-bounded turbulence Proc. IMechE 225 2010 10.1177/09544062JMES2524
- Anbarci , K. , Acikgoz , B. , Aslan , R. , Arslan , O. et al. Development of an Aerodynamic Analysis Methodology for Tractor-Trailer Class Heavy Commercial Vehicles SAE Int. J. Commer. Veh. 6 2 441 452 2013 10.4271/2013-01-2413
- Mason , W. T. , Beebe , P. S. The Drag Related Flow Field Characteristics of Trucks and Buses General Motors Detroit 1976 Plenum Press New York 1978 7
- Malviya ., V. , Mishra , R. , Fieldhouse ., J. CFD Investigation of a Novel Fuel-Saving Devices for Articulated Tractor-Trailer Combinations Engineering Applications of Computational Fluid Mechanics 3 2009
- Watkins , S. , Saunders , J. , and Hoffman , P. Wind-Tunnel Modelling off Commercial Vehicle Drag-Reducing Devices: Three Case Studies SAE Technical Paper 870717 1987 10.4271/870717
- Buckley , F. Aspects of Over-the-Road Testing of Truck Aerodynamic Drag Reducing Devices SAE Technical Paper 821286 1982 10.4271/821286
- Marks , C. and Buckley , F. The Effect of Tractor-Trailer Flow Interaction on the Drag And Distribution of Drag of Tractor-Trailer Trucks SAE Technical Paper 801403 1980 10.4271/801403
- Saunders , J. , Watkins , S. , Hoffmann , P. , and Buckley , F. Comparison of On-Road and Wind-Tunnel Tests for Tractor-Trailer Aerodynamic Devices, and Fuel Savings Predictions SAE Technical Paper 850286 1985 10.4271/850286