This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Further Development of a Method to Reproduce Highly Dynamic Force Distance Based Intrusions of Vehicle Side Structure Components
Technical Paper
2015-01-1487
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Structural component testing is essential for the development process to have an early knowledge of the real world behaviour of critical structural components in crash load cases. The objective of this work is to show the development for a self-sufficient structural component test bench, which can be used for different side impact crash load cases and can reflect the dynamic behaviour, which current approaches are not able.
An existing basic system is used, which includes pneumatic cylinders with a controlled hydraulic brake and was developed for non-structural deformable applications only (mainly occupant assessments). The system is extended with a force-distance control. The method contains the analysis of a whole vehicle FEM simulation to develop a methodology for controlled force transmission with the pneumatic cylinders for a structural component test bench.
The results of the simulation analysis provide the necessary and realizable pulses for the controlled pneumatic cylinders and the positioning of the cylinders. The applicability is shown and the good correlation of the acceleration between test and simulation is demonstrated.
This new approach considers the dynamic behaviour and is hence more complex and time-consuming as other approaches. Nevertheless the methodology is universally applicable for different side impact load cases and vehicles.
The main advantages of this new approach are to reflect the dynamic behaviour on a self-sufficient system. The methodology is easy to apply in other load cases and vehicles. Moreover it is possible to increase the prediction of FEM simulations, based on the results from the component test bench.
Recommended Content
Technical Paper | Simulation of Road Crash Facial Lacerations By Broken Windshields |
Technical Paper | Optimization of a Modular Cockpit Cross Car Beam for Crashworthiness |
Technical Paper | Finite Element Modeling of the Side Impact Dummy (SID) |
Authors
Citation
Teibinger, A., Marbler-Gores, H., Schluder, H., Conrad, V. et al., "Further Development of a Method to Reproduce Highly Dynamic Force Distance Based Intrusions of Vehicle Side Structure Components," SAE Technical Paper 2015-01-1487, 2015, https://doi.org/10.4271/2015-01-1487.Also In
References
- Deuber , O. Einbeziehung des motorisierten Individualverkehrs in ein deutsches CO2-Emissionshandelssystem Öko-Institut e.V. Freiburg 3-934490-15-8 2002
- Dröder , K. , and Goede , M. Leichtbaustrategien für zukünftige Fahrzeuggenerationen http://www.leichtbautechnologie.de Oct. 2010
- Hahn , O. , Horstmann , M. , Wielage , B. , and Mücklich S. Comparison of Joining Techniques: Soldering, Adhesive Bonding, Mechanical Joining of Magnesium Materialwissenschaft und Werkstofftechnik 38 2 173 177 2007 10.1002/mawe.200600105
- Habenicht , G. Kleben - erfolgreich und fehlerfrei Wiesbaden 978-3-8348-0485-3 2008
- Hiermaier , S. , and Kolling , S. Vom Konzept zum virtuellen Prototypen Keynote at 4 th GSFV May 2011
- Savitskii , E. M. The Influence of Temperature on the Mechanical Properties of Metals and Alloys London 978-0804700542 1962
- Hauser , F. E. Techniques for measuring stress-strain relations at thigh strain rates Experimental Mechanics 6 8 395 402 1966 10.1007/BF02326284
- Rusinek , A. , and Klepaczko , J. R. Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress International Journal of Plasticity 17 1 87 115 2001 10.1016/S0749-6419(00)00020-6
- Klimek , S. Simulation of Spot Welds and Weld Seams of Press-Hardened Steel (PHS) Assemblies Proceedings of the 7 th LS-DYNA Anwenderforum Bamberg Sep. 2008
- Hirt , G. , Urban , M. , Atmadja , H.S. , Wallentowitz , H. , and Henn , R. Entwicklung einer belastungsangepassten B-Säule und eines Dachrahmens in Stahlblech-Leichtbauweise mit verbessertem Seitencrashverhalten im Hinblick auf neue Crashanforderungen FOSTA Abschlussbericht P679 Aachen 2007
- Grasser , S. Composite- Metall- Hybridstrukturen unter Berücksichtigung großserientauglicher Fertigungsprozesse Symposium Material innovativ Ansbach 2009
- DSD ASIS - Advanced Side Impact System http://www.dsd.at/index.php?option=com_content&view=a rticle&id=237:asis-advanced-side-impact-system&catid=16&Itemid=31&lang=en Aug. 2014
- Nyvelt , F. Entwicklungsmethodik für Passive Sicherheit beim Seitenaufprall Crash Days 2010 Stuttgart Mar. 2010
- Abe , A. , Sunakawa , T. , Fujii , S. , Fukushima , M. et al. Aggressivity-Reducing Structure of Large Vehicles in Side Vehicle-to-Vehicle Crash SAE Technical Paper 2005-01-1355 2005 10.4271/2005-01-1355
- Kistler 1-Component Force Sensor http://www.kistler.com/at/en/product/PSEFO/9001A Oct. 2014
- Teibinger , A. , Marbler , H. , Schönberger , G. , Mlekusch , B. , and Dornberg , C. Virtuelle und reale Absicherung crashrelevanter Strukturbauteile aus innovativen Werkstoff-kombinationen Karosseriebautage 2010 Hamburg 2010
- DSD ASIS - Advanced Side Impact System DSD Linz 2012
- Plasticsportal Neopolen P http://www.plasticsportal.net/wa/plasticsEU∼en_GB/portal/show/content/products/foams/neopolen_p May 2014