This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Plant Modeling and Software Verification for a Plug-in Hybrid Electric Vehicle in the EcoCAR 2 Competition
Technical Paper
2015-01-1229
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The EcoCAR 2: Plugging into the Future team at The Ohio State University is designing a Parallel-Series Plug-in Hybrid Electric Vehicle capable of 44 miles of all-electric range. The vehicle features an 18.9-kWh lithium-ion battery pack with range extending operation in both series and parallel modes. This is made possible by a 1.8-L ethanol (E85) engine and 6-speed automated manual transmission. This vehicle is designed to drastically reduce fuel consumption, with a utility factor weighted fuel economy of 50 miles per gallon gasoline equivalent (mpgge), while meeting Tier II Bin 5 emissions standards. This paper details three years of modeling and simulation development for the OSU EcoCAR 2 vehicle. Included in this paper are the processes for developing simulation platform and model requirements, plant model and soft ECU development, test development and validation, automated regression testing, and controls and calibration optimization. This effort was made possible through the generous support from the U.S. Department of Energy, General Motors, The Ohio State University, and numerous competition and team sponsors.
Recommended Content
Authors
- Katherine Bovee - Ohio State University
- Amanda Hyde - Ohio State University
- Margaret Yatsko - Ohio State University
- Matthew Yard - Ohio State University
- Matthew Organiscak - Ohio State University
- Bharatkumar Hegde - Ohio State University
- Jason Ward - Ohio State University
- Andrew Garcia - Ohio State University
- Shawn Midlam-Mohler - Ohio State University
- Giorgio Rizzoni - Ohio State University
Topic
Citation
Bovee, K., Hyde, A., Yatsko, M., Yard, M. et al., "Plant Modeling and Software Verification for a Plug-in Hybrid Electric Vehicle in the EcoCAR 2 Competition," SAE Technical Paper 2015-01-1229, 2015, https://doi.org/10.4271/2015-01-1229.Also In
References
- Bovee , K. , Hyde , A. , Midlam-Mohler , S. , Rizzoni , G. et al. Design of a Parallel-Series PHEV for the EcoCAR 2 Competition SAE Int. J. Fuels Lubr 5 3 1317 1344 2012 10.4271/2012-01-1762
- Bovee , K. , Hyde , A. , Yard , M. , Gallo , E. et al. Fabrication of a Parallel-Series PHEV for the EcoCAR 2 Competition SAE Technical Paper 2013-01-2491 2013 10.4271/2013-01-2491
- Bovee , K. , Hyde , A. , Yatsko , M. , Yard , M. et al. Refinement of a Parallel-Series PHEV for Year 3 of the EcoCAR 2 Competition SAE Technical Paper 2014-01-2908 2014 10.4271/2014-01-2908
- Koprubasi , K. , Pezzini , A. , Bezaire , B. , Cooley , R. et al. Application of Model-Based Design Techniques for the Control Development and Optimization of a Hybrid-Electric Vehicle SAE Technical Paper 2009-01-0143 2009 10.4271/2009-01-0143
- Bayar , K. , Bezaire , B. , Cooley , B. , Kruckenberg , J. et al. Design of an Extended-Range Electric Vehicle for the EcoCAR Challenge.
- Bovee , K. , Hyde , A. , Trippel , T. , Vimalesan , V. et al. Rapid Vehicle Architecture Selection with Use of Autonomie Dynamic Systems and Controls Conference Ft. Lauderdale 2012
- Everett , R. An Improved Model-Based Methodology for Calibration of an Alternative Fueled Engine. Mechanical and Aerospace Engineering Department, The Ohio State University Columbus 2011
- Mathworks Documentation: Consulting the Model Advisor. http://www.mathworks.com/help/releases/R2014b/simulink/ug/consult-the-model-advisor.html 7 Jan 2015
- Mathworks Simulink Design Verifier. http://www.mathworks.com/products/sldesignverifier/index.html 7 Jan 2015
- dSPACE SYNECT. http://www.dspace.com/en/inc/home/products/sw/datenmanagement/synect.cfm 30 Apr 2014
- Bovee , K. Design of the Architecture and Supervisory Control Strategy for a Parallel-Series Plug-in Hybrid Electric Vehicle. Mechanical and Aerospace Engineering Department, The Ohio State University Columbus 2012
- Garcia , A. Feed-Forward Air-Fuel Ratio Control during Transient Operation of an Alternative Fueled Engine. Mechanical and Aerospace Engineering Department, The Ohio State University Columbus 2013
- Hyde , A. Development of a Traction Control System for a Parallel-Series PHEV. Mechanical and Aerospace Engineering Department, The Ohio State University Columbus 2014
- Serrao , L. , Onori , S. , and Rizzoni , G. Equivalent Consumption Minimization Strategy as a realization of Pontryagin's minimum principle for hybrid electric vehicle control American Control Conference St. Louis June 10 12 2009
- Organiscak , M. Model Based Suspension Calibration for Hybrid Vehicle Ride and Handling Recovery. Mechanical and Aerospace Engineering Department, The Ohio State University Columbus 2014
- Cooley , R. , Vezza , D. , Midlam-Mohler , S. , and Rizzoni , G. Model Based Engine Control Development and Hardware-in-the-Loop Testing for the EcoCAR Advanced Vehicle Competition SAE Int. J. Engines 4 1 1699 1707 2011 10.4271/2011-01-1297