This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Effect of the Throttle Valve Rotational Direction on the Tumble Motion at Different Partial Load Conditions
Technical Paper
2015-01-0380
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In PFI and GDI engines the tumble motion is the most important charge motion for enhancing the in-cylinder turbulence level at ignition time close to the spark plug position. In the open literature different studies were reported on the tumble motion, experimental and not. In the present paper the research activity on the tumble generation at partial load and very partial load conditions was presented. The added value of the analysis was the study of the effect of the throttle valve rotational direction on the tumble motion and the final level of turbulence at the ignition time close to the spark plug location. The focus was to determine if the throttle rotational direction was crucial for the tumble ratio and the turbulence level.
The analyzed engine was a PFI 4-valves motorcycle engine. The engine geometry was formed by the intake duct and the cylinder. The CFD code was FIRE AVL code 2013.1. The intake and the compression phases till TDC were simulated: inlet boundary conditions from 1D simulations were imposed. The modelled fluid was only air because the next step, now in progress, is the analysis of the mixture formation at the same partial load conditions modelling the injection. Once assessed the influence of the throttle valve on both the tumble motion and the turbulence, the authors' focus is the analysis of the mixture formation process and the evaluation of the final mixture index value.
Recommended Content
Technical Paper | Scavenge Ports Ooptimization of a 2-Stroke Opposed Piston Diesel Engine |
Technical Paper | On The Flow Modeling Through The Valve Assembly In Engine Cycle Simulations |
Technical Paper | Flow Modeling for the Branched Intake Manifold Engine |
Authors
Topic
Citation
Falfari, S., Bianchi, G., Cazzoli, G., Brusiani, F. et al., "The Effect of the Throttle Valve Rotational Direction on the Tumble Motion at Different Partial Load Conditions," SAE Technical Paper 2015-01-0380, 2015, https://doi.org/10.4271/2015-01-0380.Also In
References
- Falfari , S. , Bianchi , G. M. , Nuti , L. Numerical Comparative Analysis of In-Cylinder Tumble Flow Structures in Small PFI Engines Equipped by Heads Having Different Shapes and Squish Areas ICES2012-81095. In: Proceedings of ASME Internal Combustion Engine Division 2012 Spring Technical Conference 10.1115/ICES2012-81095
- Falfari , S. , Brusiani , F. , Bianchi , G. M. Numerical Analysis of In-Cylinder Tumble Flow Structures - Parametric 0D Model Development 2013 Energy Procedia 45 987 996 10.1016/j.egypro.2014.01.104
- Falfari , S. , Brusiani , F. , Pelloni , P. 3D CFD Analysis of the Influence of Some Geometrical Engine Parameters on Small PFI Engine Performances - The Effects on the Tumble Motion and the Mean Turbulent Intensity Distribution 2013 Energy Procedia 45 701 710 10.1016/j.egypro.2014.01.075
- Falfari , S. , Brusiani , F. , and Bianchi , G. Assessment of the Influence of Intake Duct Geometrical Parameters on the Tumble Motion Generation in a Small Gasoline Engine SAE Technical Paper 2012-32-0095 2012 10.4271/2012-32-0095
- Brusiani , F. , Falfari , S. , Cazzoli , G. Tumble motion generation in small gasoline engines: A new methodological approach for the analysis of the influence of the intake duct geometrical parameters 2013 Energy Procedia 45 997 1006 10.1016/j.egypro.2014.01.105
- Falfari , S. , Forte , C. , Brusiani , F. , Bianchi , G. et al. Development of a 0D Model Starting from Different RANS CFD Tumble Flow Fields in Order to Predict the Turbulence Evolution at Ignition Timing SAE Technical Paper 2014-32-0048 2014 10.4271/2014-32-0048
- Blaxill , H. , Downing , J. , Seabrook , J. , and Fry , M. A Parametric Approach to Spark-Ignition Engine Inlet-Port Design SAE Technical Paper 1999-01-0555 1999 10.4271/1999-01-0555
- Gaikwad , S. , Arora , K. , Korivi , V. , and Cho , S. Steady and Transient CFD Approach for Port Optimization SAE Int. J. Mater. Manf. 1 1 754 762 2009 10.4271/2008-01-1430
- Lee , K. , Bae , C. , Kang , K. The effects of tumble and swirl flows on flame propagation in a four valve S.I. engine Applied Thermal Engineering 27 2007 2122 2130
- Ramajo , D. , Zanotti , A. , Nigro , N. Assessment of a zero-dimensional model of tumble in four-valve high performance engine 2007 International Journal of Numerical Methods for Heat & Fluid Flow 17 8 770 787 10.1108/09615530710825765
- Laget , O. , Zaccardi , J. , Gautrot , X. , Mansion , T. et al. Establishing New Correlations Between In-Cylinder Charge Motion and Combustion Process in Gasoline Engines Through a Numerical DOE SAE Int. J. Engines 3 1 183 201 2010 10.4271/2010-01-0349
- Amer , A. and Reddy , T. Multidimensional Optimization of In-Cylinder Tumble Motion for the New Chrysler Hemi SAE Technical Paper 2002-01-1732 2002 10.4271/2002-01-1732
- Church , W. and Farrell , P. Effects of Intake Port Geometry on Large Scale In-Cylinder Flows SAE Technical Paper 980484 1998 10.4271/980484
- Miller , R. , Newman , C. , Dai , W. , Trigui , N. et al. Up-Front Prediction of the Effects of Cylinder Head Design on Combustion Rates in SI Engines SAE Technical Paper 981049 1998 10.4271/981049
- Baby , X. and Floch , A. Investigation of the In-Cylinder Tumble Motion In a Multi-Valve Engine: Effect of the Piston Shape SAE Technical Paper 971643 1997 10.4271/971643
- Arcoumanis , C. , Godwin , S. , and Kim , J. Effect of Tumble Strength on Combustion and Exhaust Emissions in a Single-Cylinder, Four-Valve, Spark-Ignition Engine SAE Technical Paper 981044 1998 10.4271/981044
- Mittal , M. , Schock , H. A Study of Cycle-to-Cycle Variations and the Influence of Charge Motion Control on In-Cylinder Flow in an IC Engine ASME 2010, Journal of Fluids Engineering 132 051107 1 10.1115/1.4001617
- Huang , R.F. , Lin , K.H. , Yeh , C.-N. , Lan , J. In-cylinder tumble flows and performance of a motorcycle engine with circular and elliptic intake ports Journal of Experiments in Fluids 46 1 January 2009 165 179 10.1007/s00348-008-0551-z
- Lee , K.H. , Lee , C.S. Effects of tumble and swirl flows on turbulence scale near top dead centre in a four-valve spark ignition engine Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2003 217 607 10.1243/095440703322114988
- Achuth , M. , Metha , P. S. Predictions of tumble and turbulence in four-valve pentroof spark ignition engines Int. Journal of Engine Research 2001 2 209 10.1243/1468087011545442
- Ueda , T. , Okumura , T. , Sugiura , S. , and Kojima , S. Effects of Squish Area Shape on Knocking in a Four-Valve Spark Ignition Engine SAE Technical Paper 1999-01-1494 1999 10.4271/1999-01-1494
- Fujimoto , M. , Iwai , K. , Kataoka , M. , Tabata , M. Effect of combustion chamber shape on tumble flow, squish-generated flow and burn rate Elsevier JSAE review 23 2002 291 296 10.1016/j.bbr.2011.03.031
- Berntsson , A. , Josefsson , G. , Ekdahl , R. , Ogink , R. et al. The Effect of Tumble Flow on Efficiency for a Direct Injected Turbocharged Downsized Gasoline Engine SAE Int. J. Engines 4 2 2298 2311 2011 10.4271/2011-24-0054
- Schögl , O. , Edtmayer , H. , Schmidt , S. , Leiber , S. et al. Design of a Tumble-Orientated Intake Port Layout for a Gasoline Combustion Process Used in Power Sport Application SAE Technical Paper 2011-32-0589 2011
- Adomeit , P. , Jakob , M. , Pischinger , S. , Brunn , A. et al. Effect of Intake Port Design on the Flow Field Stability of a Gasoline DI Engine SAE Technical Paper 2011-01-1284 2011 10.4271/2011-01-1284
- Murali Krishna , B. , Mallikarjuna , J. M. Comparative study of in-cylinder tumble flows in an internal combustion engine using different piston shapes - an insight using particle image velocimetry Journal of Experiments in Fluids 48 5 May 2010 863 874 10.1007/s00348-009-0783-6
- Bianchi , G. , Brusiani , F. , Postrioti , L. , Grimaldi , C. et al. CFD Analysis of Injection Timing and Injector Geometry Influences on Mixture Preparation at Idle in a PFI Motorcycle Engine SAE Technical Paper 2007-24-0041 2007 10.4271/2007-24-0041
- Falfari , S. and Bianchi , G. Development of an Ignition Model for S.I. Engines Simulation SAE Technical Paper 2007-01-0148 2007 10.4271/2007-01-0148
- Forte , C. , Bianchi , G. , and Corti , E. Multicycle Simulation of the Mixture Formation Process of a PFI Gasoline Engine SAE Technical Paper 2011-01-2463 2012 10.4271/2011-01-2463
- Forte , C. , Corti , E. , Bianchi , G. , Falfari , S. et al. A RANS CFD 3D Methodology for the Evaluation of the Effects of Cycle By Cycle Variation on Knock Tendency of a High Performance Spark Ignition Engine SAE Technical Paper 2014-01-1223 2014 10.4271/2014-01-1223
- Brusiani , F. , Forte , C. , and Bianchi , G. Assessment of a Numerical Methodology for Large Eddy Simulation of ICE Wall Bounded Non-Reactive Flows SAE Technical Paper 2007-01-4145 2007 10.4271/2007-01-4145
- Forte , C. , Corti , E. , Bianchi , G. , Falfari , S. et al. A RANS CFD 3D Methodology for the Evaluation of the Effects of Cycle By Cycle Variation on Knock Tendency of a High Performance Spark Ignition Engine SAE Technical Paper 2014-01-1223 2014 10.4271/2014-01-1223