This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analytical Target Cascading Framework for Diesel Engine Calibration Optimisation
Technical Paper
2014-01-2583
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents the development and implementation of an Analytical Target Cascading (ATC) Multi-disciplinary Design Optimisation (MDO) framework for the steady state engine calibration optimisation problem. The case is made that the ATC offers a convenient framework for the engine calibration optimisation problem based on steady state engine test data collected at specified engine speed / load points, which is naturally structured on 2 hierarchical levels: the ‘Global’ level, associated with performance over a drive cycle, and ‘Local’ level, relating to engine operation at each speed / load point. The case study of a diesel engine was considered to study the application of the ATC framework to a calibration optimisation problem. The paper describes the analysis and mathematical formulation of the diesel engine calibration optimisation as an ATC framework, and its Matlab implementation with gradient based and evolutionary optimisation algorithms. The results and performance of the ATC are discussed comparatively with the benchmark steady state solution for the engineering calibration of the diesel engine. The main conclusion from this research is that ATC optimisation framework offers an effective approach for engine calibration, with a potential to deliver significant fuel economy benefits. Further advantages of the ATC framework is that it is flexible and scalable to the complexity of the calibration problem, and enables calibrator preference to be incorporated a priori in the optimisation problem formulation, delivering important time saving for the overall calibration development process.
Authors
Topic
Citation
Kianifar, M., Campean, F., Beattie, T., and Richardson, D., "Analytical Target Cascading Framework for Diesel Engine Calibration Optimisation," SAE Technical Paper 2014-01-2583, 2014, https://doi.org/10.4271/2014-01-2583.Also In
References
- Roepke K. and von Essen C. DoE in Engine Development Qual. Reliab. Eng. Int. 24 6 643 651 2008
- Dwyer T. P. , Kianifar M. R. , Bradley W. J. , Campean I. F. , Mason B. A. , Ebrahimi M. K. , Richardson D. , and Beddow L. DoE Framework for GDI Engine Mapping and Calibration Optimisation for CO 2 and Particulate Number Emissions Roepke Des. Exp. Engine Dev. Expert Verlag 418 432 2013
- Roudenko O. , Randazzo C. , Doria L. , and Castagna E. Application of a Pareto-Based evolutionary algorithm to fuel injection optimization International Conference on Statistics and Analytical Methods in Automotive Engineering 2002 4 81 92
- Yin X. Application of Multidisciplinary Design Optimisation to Engine Calibration Optimisation PhD thesis University of Bradford 2012
- Allison J. T. Complex system optimisation: A review of Analytical Target Cascading, Collaborative Optimisation and other formulations MSc Thesis The University of Michigan 2004
- Kroo I. , Altus S. , Braun R. , Gage P. , and Sobieski I. Multidisciplinary Optimization Methods for Aircraft Preliminary Design NASA Langley Technical Report Server Stanford Univ. Stanford, CA, United States Sep. 1994
- Kodiyalam S. and Sobieszczanski-Sobieski J. Multidisciplinary design optimisation - some formal methods, framework requirements, and application to vehicle design Int. J. Veh. Des. 25 1-2 2001 3 22 2001
- Kodiyalam S. and Sobieszczanski-Sobieski J. Bilevel Integrated System Synthesis with Response Surfaces AIAA J. 38 8 1479 1485 Aug. 2000
- Cramer E. J. , Dennis J. E. , Jr. , Frank P. D. , Lewis R. M. , and Shubin G. R. Problem Formulation for Multidisciplinary Optimization SIAM J. Optim. 4 4 754 776 Nov. 1994
- Kim H. M. , Rideout D. G. , Papalambros P. Y. , and Stein J. L. Analytical Target Cascading in Automotive Vehicle Design J. Mech. Des. 125 3 481 2003
- Kim H. M. , Kokkolara M. , Louca L. S. , Deladrammatikas G. J. , Michelena N. F. , Filipi Z. S. , Papalambros P. Y. , Stein J. L. , and Assanis D. N. Target Cascading in Vehicle Redesign: a class VI truck study Int. J. Veh. Des. 29 3 199 225 2002
- Kim H. M. , Jiang T. , Michelena N. F. , and Papalambros P. Y. Target Cascading in Optimal System Design J. Mech. Des. 125 3 474 480 2003
- Kang N. , Kokkolaras M. , and Papalambros P. Y. Solving multiobjective optimization problems using quasi-separable MDO formulations and analytical target cascading 10th World Congress on Structural and Multidisciplinary Optimization 2013
- Kang N. , Kokkolaras M. , and Papalambros P. Optimal Design of Commercial Vehicle Systems Using Analytical Target Cascading 12th AIAA Aviat. Technol. Integr. Oper. Conf. 14th AIAA/ISSMO Multidiscip. Anal. Optim. Conf. 10.2514/6.2012 5524 Sep. 2012
- Cooper A. B. , Georgiopoulos P. , Kim H. M. , and Papalambros P. Y. Analytical Target Setting: An Enterprise Context in Optimal Product Design J. Mech. Des. 128 1 2006
- Tosserams S. , Etman L. F. P. , Papalambros P. Y. , and Rooda J. E. An augmented Lagrangian relaxation for analytical target cascading using the alternating direction method of multipliers Struct. Multidiscip. Optim. 31 3 176 189 Feb. 2006
- Tosserams S. , Kokkolaras M. , Etman L. F. P. , and Rooda J. E. A Nonhierarchical Formulation of Analytical Target Cascading J. Mech. Des. 132 5 1 13 2010
- Barlow T. J. , Latham S. , McCrae I. S. , and Boulter P. G. A reference book of driving cycles for use in the measurement of road vehicle emissions 2009 1 14
- Andrew A. M. Another efficient algorithm for convex hulls in two dimensions Inf. Process. Lett. 9 5 216 219 Dec. 1979
- Beattie T. , Osborne R. , and Graupner W. Engine Test Data Quality Requirements for Model Based Calibration: A Testing and Development Efficiency Opportunity SAE Technical Paper 2013 10.4271/2013 01-0351
- MathWorks Global Optimization Toolbox - ga - Matlab R2013b http://www.mathworks.com
- MathWorks fmincon - Matlab R2013b 2014 http://www.mathworks.com
- Emtage A. Model Based Calibration - Next Steps Roepke (Ed) Design of Experiments in Engine Development Expert Verlag 2009