This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Brake Squeal and Disc Metallurgy Variability: Importance of Disc Wear
Technical Paper
2014-01-2491
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A previous investigation showed that minor variations in alloying elements in gray cast iron disc contributed to measurable differences in friction and disc wear. This investigation was undertaken to find out if and how the increased friction and disc wear might affect brake squeal. The SAE J2522 and J2521 dynamometer procedures as well as an OEM noise dynamometer procedure and a chassis dynamometer noise procedure were used to find out if a correlation between disc wear and brake squeal could be discovered. In all cases, as the wear rate of a disc increases under a given set of test conditions, disc material transfer to the pad surface increases, which results in increased friction and brake squeal. Also a good method to detect disc variability (disc to disc, within a disc) is discussed.
Recommended Content
Authors
Topic
Citation
Lee, S., Jeong, J., Kim, S., Kim, S. et al., "Brake Squeal and Disc Metallurgy Variability: Importance of Disc Wear," SAE Technical Paper 2014-01-2491, 2014, https://doi.org/10.4271/2014-01-2491.Also In
References
- Lee , S. , Kim , S. , Kim , S. , and Rhee , S. , Brake Disc Variability: Effect on Friction and Wear SAE Int. J. Passeng. Cars - Mech. Syst. 6 3 1455 1464 2013 10.4271/2013-01-2053
- Kim , S. , Lee , S. , Park , B. , and Rhee , S. , A Comprehensive Study of Humidity Effects on Friction, Pad Wear, Disc Wear, DTV, Brake Noise and Physical Properties of Pads SAE Technical Paper 2011-01-2371 2011 10.4271/2011-01-2371
- Kim , S. , Lee , S. , Park , B. , Kim , S. et al. A Comparative Study of Non-Asbestos Organics vs. Low Steel Lomets for Humidity Sensitivity SAE Technical Paper 2012-01-1788 2012 10.4271/2012-01-1788
- Lange , J. and Ostermeyer , G. , The Effect of Metal Pickup to the Friction Interfaces SAE Technical Paper 2011-01-2348 2011 10.4271/2011-01-2348
- Passarelli , U. , Durando , P. , and Buonfico , P. , Phenomenological Approach to the Automotive Disc-Scoring Phenomena Related to Metal Pick Up Generation on Brake Pad Surface SAE Technical Paper 2009-01-3021 2009 10.4271/2009-01-3021
- Hinrichs , R. , Vasconcellos , M. , and Soares , M. , Magnetite Generated by Tribo-Reactions on the Surface of Brake Pad Material SAE Technical Paper 2010-01-1672 2010 10.4271/2010-01-1672
- Nukumizu , K. , Kobayashi , T. , Abe , T. , and Unno , M. , Study of the Formulation Mechanism for Metal Pick-up on the Frictional Surface of a Disc Brake Pad SAE Technical Paper 2008-01-2541 2008 10.4271/2008-01-2541
- Liu , T. , Rhee , S. and Lawson , K. , A Study of Wear Rates and Transfer Films of Friction Materials Wear 60 1980 1 12
- Kosaka , K. , Nishizawa , Y. , Kurita , Y. , and Oura , Y. , Influence of Pad Surface Texture on Disc Brake Squeal SAE Technical Paper 2011-01-2354 2011 10.4271/2011-01-2354
- Massi , F. , Berthier , Y. , and Baillet , L. , Contact Surface Topography and System Dynamics of Brake Squeal Wear 265 2008 1784 1792