This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Simplified Method to Make the Flux Table Considering Temperature Dependence of IPMSM
Technical Paper
2013-01-2497
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper proposes a simplified method to make the flux table considering the magnetic flux variation of the IPMSM (Interior Permanent Magnet Synchronous Machine) caused by temperature change in vehicle traction applications. Nowadays, normally an IPMSM with a rare-earth magnet is used for HEV traction applications. But because the flux density of the magnet varies with temperature, the optimal operating points, such as MTPA (Maximum Torque Per Ampere) and MTPV (Maximum Torque Per Voltage) of the motor drift according to temperature change. Those operating points can be expressed in a lookup table, that is, a flux table obtained by off-line experiment, which produces the DQ-axis current command with respect to the torque and flux reference. To reflect this temperature dependence in control, usually flux tables are generated at high, medium and low temperatures. Conventionally, all the three tables are constructed by experiment, which takes a great deal of time. In this paper, suggested is a simplified way that the two tables at low and high temperatures are constructed using a flux table at a medium temperature and the back EMF values at three temperatures. The simulation and experimental results of the proposed method are shown to verify its feasibility.
Authors
Citation
Kim, S., Kwon, T., and Kim, H., "A Simplified Method to Make the Flux Table Considering Temperature Dependence of IPMSM," SAE Technical Paper 2013-01-2497, 2013, https://doi.org/10.4271/2013-01-2497.Also In
References
- Lovelace Edward Carl Francis Optimization of a Magnetically Saturable Interior Permanent-Magnet Synchronous Machine Drive Doctoral thesis MIT(Massachusetts Institute of Technology 2000
- Ding Xiaofeng Online Temperature Estimation of IPMSM Permanent Magnets in Hybrid Electric Vehicles ICIEA (Industrial Electronics and Applications) 179 183 2011
- Specht A. , Bocker J. Observer for the rotor temperature of IPMSM 14 th EPE-PEMC (International Power Electronics and Motion Control Conference) T4-12 T4-15 2010
- Ryota H. , Shimada H. , Shimomura S. Design of a ferrite magnet vernier machine for an in-wheel machine IEEEECCE (Energy Conversion Congress and Exposition) 2790 2797 2011
- Kim Y. S. , Sul S. K. Torque control strategy of an IPMSM considering the flux variation of the permanent magnet IEEE-IAC (Industry Applications Conference) 1301 1307 2007
- Kim Y. S. Control Characteristics of an Interior Permanent Magnet Synchronous Motor Considering Temperature Effects Master Thesis Seoul National University 2007
- Jeong Y. S. Adaptive Flux Observer with On-line Inductance Estimation of an Interior PM Synchronous Machine Considering Magnetic Saturation JPE (Journal of Power Electronics) 188 197 9 2 2009